Fiber-coupled external cavity DFB-laser

David C. Nak, Jasper Riebesehl, Andreas Hemmerich · 2025

Read Fiber-coupled external cavity DFB-laser by David C. Nak, Jasper Riebesehl, Andreas Hemmerich (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-15591.txt.

Introduction

David Nak, Jasper Riebesehl, and Andreas Hemmerich build a narrow-linewidth laser for portable precision work in a 2025 paper. Compact, sturdy lasers with very pure tones serve quantum measurement outside the lab. Their design puts a feedback chip laser in an external cavity, all linked by optical fiber.

A modulator inside the cavity, locked to a fine reference cavity, trims the tone down to a few kilohertz of width. They read the laser's spectrum with a delayed self-mixing trick and a data-driven cleanup method. The setup already cools calcium atoms on a narrow transition for an ultracold gas, a real test of its steadiness.

Catalog record

CREATORDavid C. Nak, Jasper Riebesehl, Andreas Hemmerich
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-15591

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Fiber-coupled external cavity DFB-laser David C. Nak, Jasper Riebesehl, Andreas Hemmerich Abstract Narrow-linewidth, compact and robust laser systems are of high interest, especially with prospects for portable quantum metrological applications. We realized an external cavity DFB-laser incorporating an intra-cavity EOM in a fully fiber-coupled manner. Additional active feedback on the EOM, by referencing a high finesse cavity, enabled us to reach low kHz-linewidths. We analyzed the laser spectrum by means of delayed self-heterodyne measurements to reconstruct the power spectral density. This is achieved by utilizing a data-driven power spectrum equalization approach. The presented laser setup is successfully used to create an ultracold gas by laser cooling on a narrow atomic transition of Ca 40 {}^{\makebox[7.97226pt][r]{$\scriptstyle 40$}}_{\makebox[7.97226pt][r]{$\scriptstyle$}}\mathrm{Ca} at 1978 nm 1978\text{\,}\mathrm{nm} . 1 Introduction Narrow-linewidth lasers are essential for various applications such as for optical clocks and quantum metrology [ 1 , 2 ] , laser cooling [ 3 , 4 , 5 , 6 , 7 ] , quantum computation [ 8 , 9 ] and quantum communication [ 10 ] . A well established laser technology in the field of atomic physics are semiconductor laser diodes due to their simplicity and economical prices. However, laser diodes usually have free-running linewidths spanning several \text{\,}\mathrm{GHz} limiting the applicability for the aforementioned fields. One possibility to address this shortcoming is to introduce frequency-selective optical feedback on the laser diode with additional external-cavity feedback [ 11 , 12 ] . A common implementation of this approach are grating-stabilized external-cavity diode lasers (ECDL) [ 13 ] where an optical grating acts as a frequency discriminator. In these setups, the laser linewidth can be reduced to a few \text{\,}\mathrm{kHz} . A possible limitation in these systems is typically caused by the sensitivity to environmental perturbations, as they are often implemented using free-space optics. Another approach is the addition of an integrated frequency selective element such as in distributed feedback (DFB) or distributed Bragg reflector (DBR) lasers. These devices commonly have free-running linewidths of a few hundred \text{\,}\mathrm{kHz} to a few tens of \text{\,}\mathrm{MHz} and are more robust to perturbations. Additional methods to further decrease the linewidth have been demonstrated using additional optical feedback, for example by a fiber Bragg grating [ 14 ] or by optical feedback of a tunable free-space external cavity using a piezo actuated mirror or an intra-cavity fiber-coupled waveguide electro-optical modulator (EOM) [ 15 , 16 ] . The latter two approaches in particular offer a cost-efficient way for linewidth narrowing as they can be realized by off-the-shelf components with off-the-shelf laser diodes. However, they also have drawbacks, such as reduced capability for fast continuous frequency tuning and the introduction of free-space components. These components may require maintenance and compromise the robustness of the underlying semiconductor chip. To address the shortcomings of the approaches demonstrated in the literature and combine their benefits, we present an improved laser design based on a fiber-coupled external cavity. We utilize a fiber-coupled EOM with a reflective coating on the output fiber pigtail to give optical feedback into a DFB laser diode. In this setup all components of the laser system are fiber-coupled with polarization-maintaining fibers. This eliminates the need for opto-mechanical adjustments and maintenance, since the setup procedure is simple plug-and-play. This laser setup is stabilized to a transfer cavity with a 31\text{\,}\mathrm{kHz} linewidth by applying active electronic feedback on the EOM in the optical feedback path. Similar to the system shown in [ 16 ] the diode laser is passively running. The lock sustains mechanical shocks applied to the laser system, for example, by metallic tools. Depending on the temperature stability of the laboratory, the lock holds for several hours or even days. To benchmark the performance of the laser and compare the different states we measure its phase noise. While there usually are multiple approaches to perform such a measurement, the wavelength of the laser under test (LUT) prohibits many of them. Since neither a stable reference laser at 2\text{\,}\mathrm{\SIUnitSymbolMicro m} nor a second, identical copy of the LUT is available, a straightforward heterodyne beat note measurement is not feasible. Commercially available phase noise analyzers 1 1 1 i.e. OEwave OE4000 , HighFinesse Linewidth Analyzer are not available for the required wavelength band. Another option is the conversion of the phase fluctuations into amplitude fluctuations using a reference cavity. This relieves the requirement for a separate laser [ 17 , 16 ] . In this approach however the discrimination between amplitude and phase noise is lost and the analysis bandwidth is limited by the linewidth of the cavity. Additionally, for accurate low-frequency analysis, construction of an ultra-stable cavity is required, which increases complexity. One of the remaining options is a self-heterodyne setup, in which the laser serves as its own reference. A delay arm long enough to ensure incoherence between the light in the interferometer arms is infeasible since the coherence length of the laser is very long and the attenuation of 2\text{\,}\mathrm{\SIUnitSymbolMicro m} light in standard single-mode fiber is very high. Therefore the setup chosen is a short delay path self-heterodyne measurement. A short delay arm in this setup has the benefit of reduced sensitivity to fiber-induced phase noise [ 18 ] and manageable attenuation in the delay arm. Because of the short delay, the remaining coherence causes unwanted interference effects which distort the measured phase noise. To get a true measure for the linewidth of the laser, we use a digital signal processing solution to remove the interference effects. The method is based on a power spectrum equalization filtering method, which has been shown to correct interference effects in simulated phase noise spectra [ 19 ] . To make this approach applicable to experimental data, we extend the method with a fitting routine to extract a non-parametric model of the phase noise directly from the data. We determined a linewidth of a few \text{\,}\mathrm{kHz} for the laser with active feedback. However, there are indications that this limitation is caused by vibrational and acoustical noise affecting the measurement system, suggesting an even smaller linewidth. The laser was built to replace an old home-build Thulium:YAG laser and is used for cooling a gas of {}^{\makebox[7.97226pt][r]{$\scriptstyle 40$}}_{\makebox[7.97226pt][r]{$\scriptstyle$}}\mathrm{Ca} atoms in a magneto-optical trap on a narrow transition of metastable states down to 20\text{\,}\mathrm{\SIUnitSymbolMicro K} [ 20 , 21 ] . 2 Laser system and measurement setup The whole setup consists of three parts, the laser system, the stabilization setup and the delayed self-heterodyne measurement setup. The laser system is constructed in a modular manner. A simplified schematic of the setup is illustrated in Fig. 1 . 2.1 Laser system The seed laser used for our setup is a Toptica DFB pro BFY system which is based on a Eblana EP1977-7-DM-B06-FM distributed-feedback-like (DFB) laser diode in a butterfly package. This butterfly package already incorporates a 30\text{\,}\mathrm{dB} optical isolator and has a 0.8\text{\,}\mathrm{m} long fiber pigtail. It outputs more than 3\text{\,}\mathrm{mW} of power at our desired wavelength of 1978\text{\,}\mathrm{nm} . In order to separate the feedback light from the use-light, a custom made polarization-maintaining fiber splitter is used. However, for a broad range of wavelengths they are available off-the-shelf. In order to reach a feedback power in the target range between -35\text{\,}\mathrm{dB} and -47\text{\,}\mathrm{dB} , we chose

Read the complete text