Ionic strength–driven cavitation nucleation: from energy deposition-based to tension-based cavitation

Junhao Cai, Yuhan Li, Yunqiao Liu, Benlong Wang, Mingbo Li · 2025

Read Ionic strength–driven cavitation nucleation: from energy deposition-based to tension-based cavitation by Junhao Cai, Yuhan Li, Yunqiao Liu, Benlong Wang, Mingbo Li (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-13330.txt.

Introduction

Junhao Cai and colleagues found a single dial governing bubble birth in salty water in a 2025 study. Cavitation, the sudden formation of vapor bubbles, can be triggered by dumping energy fast or by stretching liquid under tension, and it matters from ship propellers to medical ultrasound. Combining laser breakdown experiments with atom-level simulations of stretched solutions, the team varied salts and concentrations across both worlds.

Bubble inception and strength tracked ionic strength alone, with the species of ion barely mattering. In laser shots, more salt lowered the breakdown threshold and multiplied bubbles by seeding extra electrons for the ionization avalanche. Simulations tie the effect to net charge density reshaping the water's hydrogen bond network. One parameter unifies two cavitation regimes.

Catalog record

CREATORJunhao Cai, Yuhan Li, Yunqiao Liu, Benlong Wang, Mingbo Li
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE30 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-13330

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ionic strength–driven cavitation nucleation: from energy deposition-based to tension-based cavitation Junhao Cai, Yuhan Li, Yunqiao Liu, Benlong Wang, Mingbo Li Abstract In this work, we present a unified experimental and simulation investigation of cavitation in aqueous electrolyte solutions, combining nanosecond laser–induced optical breakdown and all-atom molecular dynamics (MD) simulations under tensile stress. Across both cavitation scenarios, we find that cavitation inception and intensity (bubble nucleation count, cavitation-zone length, vapor-volume fraction) are governed by ionic strength alone, with negligible dependence on the ion species. In laser experiments, increasing ionic strength lowers the breakdown threshold and amplifies bubble generation by supplying extra seed electrons for inverse Bremsstrahlung–driven avalanche ionization. We elucidate the mechanism of action of the ionic strength through the MD simulations, which essentially quantifies the net charge density in the bulk, and thus its combined influence on the generation of seed electrons and the perturbation of the hydration network. These findings identify ionic strength serving as a unifying parameter controlling cavitation in electrolyte solutions: whether driven by rapid energy deposition or by tensile stress imposed. keywords Cavitation nucleation ,Optical breakdown ,Cavitation bubble ,Ionic strength ,Hydration network † † credit: Methodology, Validation, Investigation, Writing original draft, Writing-review \& editing, Formal analysis, Data curation, Visualization † † credit: Methodology, Software, Validation, Investigation, Writing original draft, Visualization † † credit: Supervision, Writing-Review & Editing, Project administration † † credit: Supervision, Resources, Funding acquisition, Project administration † † corresponding: Corresponding author † † credit: Conceptualization, Supervision, Methodology, Writing-Original Draft, Visualization, Funding acquisition, Project administration † † Junhao Cai and Yuhan Li contributed equally to this work. 1 Introduction Cavitation, the rapid formation and violent collapse of vapor or gas cavities in a liquid, plays a central role in fields ranging from marine propulsion to sonochemical reactors and biomedical ultrasound Brennen 2014 ; Stride and Coussios 2019 ; Koukouvinis and Gavaises 2021 ; Nagalingam et al. 2023 . In practice, most of these applications involve electrolyte solutions (e.g., seawater, industrial effluents, physiological fluids), yet the extensive cavitation research has focused on pure water. This gap leaves critical uncertainties in predicting cavitation inception, erosion rates, and bubble dynamics under realistic ionic conditions. Addressing the influence of dissolved salt ions is therefore both scientifically necessary and urgently required to develop reliable models and control strategies for cavitation in real systems. The onset and evolution of cavitation are governed by both the liquid’s physicochemical properties and the local pressure field within the cavitation zone Supponen et al. 2016 ; Zeng et al. 2018 . In an ideal, impurity‐free liquid, cavitation occurs via homogeneous nucleation—a process whose fundamental principles were laid out by Gibbs and subsequently developed into modern nucleation theory Zeldovich 1943 . Classical Nucleation Theory (CNT) predicts that pure water can sustain tensile stresses exceeding –140 MPa at ambient temperature before spontaneous vapor‐void formation occurs Caupin 2005 ; Kalikmanov 2012 . Microscopically, thermal fluctuations generate transient low‐density ”voids” that usually heal, but occasionally reach the critical radius required for stable bubble growth when assisted by mechanical or acoustic perturbations Zheng et al. 1991 ; Azouzi et al. 2013 . In practice, however, experimental measurements consistently find cavitation thresholds far below CNT predictions, even in rigorously purified water, because heterogeneous nucleation on particles, microbubbles, or container surfaces drastically lowers the tensile strength Caupin and Herbert 2006 ; Berthelot 1850 ; Roedder 1967 ; Briggs 2004 ; Trevena 1989 ; Galloway 2005 ; Gao et al. 2021 ; Arora et al. 2004 ; Arora et al. 2007 ; Rosselló and Ohl 2021 . While extensive work has probed the role of microscopic or nanoscopic impurities in heterogeneous nucleation Bremond et al. 2006 ; Zhang et al. 2014 ; Saini et al. 2024 , the molecular‐scale influence of uniformly dissolved ions has received far less attention. Unlike solid or gas inclusions, dissolved ions distribute homogeneously yet subtly modify bulk properties—such as surface tension, gas solubility, and the electrostatic double layer—potentially shifting cavitation thresholds without offering discrete nucleation sites. A handful of studies on ionic liquids have hinted at altered cavitation and nanobubble stability in the presence of ions Johnson and Cooke 1981 ; Brotchie et al. 2011 , but a systematic understanding remains lacking. To address this gap, we investigate the role of electrolyte ions in cavitation‐bubble nucleation through two complementary approaches: energy‐deposition–based laser‐induced breakdown experiments and tension‐based all-atom molecular dynamics (MD) simulations. Laser-induced cavitation, being a non-contact method, permits precise control over energy deposition and the isolation of specific factors (e.g., nanobubble populations Li et al. 2024 ) without interference from extrinsic impurities. The ensuing explosive expansion generates shock waves and bubble oscillations that reveal the kinetics of plasma‐mediated cavitation. In parallel, MD simulations under imposed tensile stress elucidate how ionic strength perturbs the hydrogen‐bond network and lowers the mechanical barrier for bubble nucleation, providing atomistic insight into ion‐mediated cavitation dynamics. Figure 1: (a) Experimental setup of laser-induced cavitation system. (b) MD configuration of an aqueous solution system subjected to shock waves, where water molecules in the right half of the simulation box are folded to give a close-up of the soluble ions, exemplified by Na + and Cl - . The right side shows four atomic configurations of ions embedded in the simulation box. Figure 2: Laser-induced breakdown and cavitation bubble in (a) ultrapure water, (b) NaCl and (c) \rm{MgSO_{4}} solutions. The snapshots in NaCl and \rm{MgSO_{4}} solutions were chosen at the moment when the cavitation bubbles near the focal point had almost reached their maximum size. The laser pulse energy density for all cases is 6.25 \rm{J/cm^{2}} . All snapshots share the same scale bar with a length of 2 \rm{mm} . 2 Methods Experimental. All aqueous solutions, including control samples, were prepared using ultrapure water (resistivity: 18.2 M \Omega ·cm, pH6.5) sourced from a Milli-Q purification system (Merck, Germany). Electrolyte solutions with molar concentrations ranging from 0.001 to 5 mol/L (M) for NaCl and 0.001 to 1 M for \rm{MgSO_{4}} were prepared using analytical-grade salts (NaCl: \geq 99.999 \% , Thermo Scientific; \rm{MgSO_{4}} : \geq 99.5 \% , Sigma-Aldrich). Complete dissolution was achieved by magnetic stirring at 500 rpm (HS8Pro, JoanLab, China) for 10 min under temperature-controlled conditions (25 ∘ C). The experimental configuration for laser-induced cavitation and visualization is depicted in Figure 1 (a). A nano-pulsed laser (Q-switched Nd: YAG, Dawa-100, 1064 nm wavelength, 9 ns pulse width, BeamTech, China) delivered high-energy pulses to induce optical breakdown within a quartz chamber (dimensions: 50 \times 50 \times 50 mm 3 ) filled with either ultrapure water or electrolyte solutions. The chamber was securely mounted and sealed to minimize vibrations and prevent external contamination. Laser pulse energies, ranging from 1.5 to \rm{6.5\ J/cm^{2}} , were measured using an energy meter (FieldMaxII, Coherent, USA) integrated into the beam path. The expanded laser beam was precisely focused at the geometric center of the chamber to mitigate boundary effects from the chamber walls and free liquid surface on cavitation dynamics. The focused laser pulse initiated localized optical breakdown, generating plasma that expanded to form a spherical vapor bubble. The progression from optical breakdown to cavitation inception was captured using a high-speed camera (S1310M, Revealer, China; 150,000 fps) . The recorded field of view ( \rm{42\times 3.2\ mm^{2}} ) was imaged

Read the complete text