Output behavior equivalence and simultaneous subspace identification of systems and faults

Gabriel de Albuquerquer Gleizer · 2025

Read Output behavior equivalence and simultaneous subspace identification of systems and faults by Gabriel de Albuquerquer Gleizer (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-13294.txt.

Introduction

Gabriel de Albuquerque Gleizer tackles the problem of identifying a dynamical system that is being hit by unknown faults, using only input and output data. Standard identification assumes clean data or a known fault-free record. Here there is neither, and no assumption is made about whether faults hit sensors, actuators, or elsewhere.

Gleizer shows that under mild conditions on the fault signal, a standard subspace method can still recover the matrices of the input-output part of the system. He then defines output behavior equivalence, meaning two systems share the same set of possible outputs, and gives a way to test it from matrices. Finally he shows how to estimate, from data, all fault matrices that could explain the record with a fault signal of smallest possible size.

Catalog record

CREATORGabriel de Albuquerquer Gleizer
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-13294

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Output behavior equivalence and simultaneous subspace identification of systems and faults Gabriel de Albuquerquer Gleizer Abstract We address the problem of identifying a system subject to additive faults, while simultaneously reconstructing the fault signal via subspace methods. We do not require nominal data for the identification, neither do we impose any assumption on the class of faults, e.g., sensor or actuator faults. We show that, under mild assumptions on the fault signal, standard PI-MOESP can recover the system matrices associated to the input–output subsystem. Then we introduce the concept of output behavior equivalence, which characterizes systems with the same output behavior set, and present a method to establish this equivalence from system matrices. Finally, we show how to estimate from data the complete set of fault matrices for which there exist a fault signal with minimal dimension that explains the data. I INTRODUCTION In many applications, it is difficult to identify a system in a controlled environment. For example, when faulty behavior appears, it may be impractical or economically undesirable to remove the system from the field to perform a new identification experiment. For example, digital twins must enable tasks such as re-identification of system parameters, uncovering new dynamics, and detecting and reconstructing obtrusive signals that are affecting the system performance, all executed without removing the system from operation. Thus, an important problem is to simultaneously estimate the matrices that describe the system model and its external disturbances; for the latter, it is desirable to both learn how they affect the system and what is the disturbance signal that explains the data. Technically, we consider simultaneous identification and input reconstruction of LTI systems of the form \displaystyle\bm{x}(k+1) \displaystyle=\bm{A}\bm{x}(k)+\bm{B}\bm{u}(k)+\bm{F}\bm{v}(k), \displaystyle\bm{y}(k) \displaystyle=\bm{C}\bm{x}(k)+\bm{D}\bm{u}(k)+\bm{G}\bm{v}(k), where \bm{x}(k),\bm{u}(k),\bm{y}(k), and \bm{v}(k) represent the unknown state, known input, known output, and unknown fault at time k , respectively. That is, the goal is to estimate the matrices \bm{A},\bm{B},\bm{C},\bm{D},\bm{F},\bm{G} from a series of values of \bm{u} and \bm{y} , as well as the corresponding trajectories of the state \bm{x} and fault \bm{v} , which is also called unknown input or disturbance in the literature. We fix the word fault for \bm{v} in this note, but whether it is to be considered a fault depends on the application. In system identification, the fault has usually a probabilistic nature; e.g., it is generally assumed to be wide-sense stationary (WSS), which enables very efficient and well-established methods (see, e.g., [ 1 ] ). Unfortunately, many disturbances cannot be assumed to be WSS unless very long time horizons are taken: this is the case of environmental conditions such as temperature and wind, and the influence of other subsystems that may be connected to the system of interest. In the present work, we impose no probabilistic assumption on \bm{v}. Most of the literature of data-driven fault estimation restricts the class of faults to either sensor ( \bm{F}=\bm{0},\bm{G}=\bm{D} ), actuator faults ( \bm{F}=\bm{B},\bm{G}=\bm{0} ) [ 2 , 3 ] or load disturbances ( \bm{F}=\textbf{I},\bm{G}=\bm{0} ) [ 4 ] . Moreover, the identification is generally a two-step process, where in the first step a fault-free dataset is obtained, which allows identification of the system either through geometric methods [ 5 ] , system matrices and/or Markov parameters [ 6 ] , [ 7 ] , basis functions [ 3 ] , or behavioral subspaces [ 8 ] ; see [ 9 ] for an overview. Once a model is (implicitly) identified, the fault matrices can be established from the system matrices, and input reconstruction becomes fundamentally a problem of system inversion or, under stricter assumptions on the fault signal, input tracking [ 10 , 11 ] . Fewer works are dedicated to simultaneous identification of systems and external disturbances. Most require some extra assumption on the fault signal, e.g., it is constant, slow-varying or periodic [ 12 , 4 , 13 ] . One of the few papers that consider simultaneous identification and reconstruction of unknown inputs without any requirement on their predictability is [ 14 ] , and as such it is the closest this work. Another related area is blind identification [ 15 ] . In this setting, the system matrices and the input are unknown, and dropping stationarity assumptions on the input makes the problem extremely challenging. For this reason, extra assumptions have to be imposed, e.g., the input is constant [ 16 ] , or it is the output of an autonomous LTI system [ 17 , Sec. 8.5.1] . Our problem is easier than general blind identification, because we assume to be in possession of the input \bm{u}, with which the system can be excited. This allows us to impose very little assumptions on the input signal itself. As stated earlier, the closest work to the present one is [ 14 ] . Therein, the system is assumed to be strongly input observable [ 18 ] , and the unknown input dimension is known. We drop these assumptions to understand two fundamental problems: (i) What is the smallest unknown input dimension that explains the data? (ii) What can be learned if strong input observability does not hold? In other words, what is the set of systems and corresponding inputs that could explain the obtained output? In addition, [ 14 ] rely on strong input and state observability to estimate the nominal system matrices (\bm{A},\bm{B},\bm{C},\bm{D}) . We show that this is sufficient but not necessary. Our contributions are the following: (i) Under relatively mild assumptions on the fault signal, using zero-mean ergodic inputs allows one to use standard PI-MOESP [ 19 ] to consistently identify the nominal system matrices \bm{A},\bm{B},\bm{C},\bm{D} , without the need for strong input and state observability. (ii) We introduce the notion of output behavioral equivalence to compare different systems that can generate the same output trajectories. (iii) Given identified system matrices, the problem can be reduced to simultaneous (blind) identification of fault matrices \bm{F},\bm{G} , the initial state \bm{x}(0) and the fault signal \bm{v} . We show how to determine the minimal input dimension that explains the output, and provide an algorithm to identify the set of matrices \bm{F},\bm{G} that can be used for reconstruction of compatible values of \bm{x}(0) and \bm{v} . Finally, we provide the Matlab code to execute the proposed methods and reproduce the results of this note in https://github.com/ggleizer/fault_id . II PRELIMINARIES AND PROBLEM FORMULATION II-A Mathematical notation We denote by \mathbb{N}_{0} the set of natural numbers including zero, \mathbb{N}\coloneqq\mathbb{N}_{0}\setminus\{0\} and by \mathbb{R} and \mathbb{C} the sets of real and complex numbers, respectively. We denote by \mathcal{R}(\bm{A}) the column space (range) of the matrix \bm{A}\in\mathbb{R}^{n\times m} , by \bm{A}^{\mkern-1.5mu\mathrm{T}}\! its transpose, and by {\left\|\bm{A}\right\|}_{*} its nuclear norm. When matrix \bm{A} is left (resp. right) invertible we denote by \bm{A}^{-L} (resp. \bm{A}^{-R} ) any left (resp. right) inverse of \bm{A} . For indexed vectors or matrices \bm{A}_{i} , the matrix \bm{A}_{k:l}, l>k , is built by vertically stacking \bm{A}_{i} from k to l . We denote the space of polynomial matrices with real coefficients with n rows and m columns by \mathbb{R}[\cdot]^{n\times m} . The value of \max_{\mathfrak{q}\in\mathbb{C}}\rank(\bm{A}(\mathfrak{q})) is called the normal rank of \bm{A}(\mathfrak{q}) , and it is equal to \rank(\bm{A}(\mathfrak{q})) for almost all \mathfrak{q}\in\mathbb{C} . II-B System model and problem statement We consider

Read the complete text