Thermal transport mapping in twisted double bilayer graphene

Jean Spièce, Roop Kumar Mech, Alessandra Canetta, Rebeca Ribeiro-Palau, Oleg Kolosov, Pascal Gehring · 2025

Read Thermal transport mapping in twisted double bilayer graphene by Jean Spièce, Roop Kumar Mech, Alessandra Canetta, Rebeca Ribeiro-Palau, Oleg Kolosov, Pascal Gehring (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-12957.txt.

Introduction

An international team maps how heat flows through twisted stacks of graphene sheets, in a 2025 paper. Twisting two double layers against each other creates moiré patterns that reshape the material's electronic and thermal behavior, but heat transport in such stacks had rarely been measured directly.

Using a scanning thermal microscope, the researchers found that the twisted stack resists heat flow more than untwisted bilayers, by a measured margin they report with its uncertainty. The change stems both from altered conduction inside the material and from the contact with the probe. Modeling supports the reading. The results suggest twist angle as a knob for thermal design in future devices.

Catalog record

CREATORJean Spièce, Roop Kumar Mech, Alessandra Canetta, Rebeca Ribeiro-Palau, Oleg Kolosov, Pascal Gehring
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-12957

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Thermal transport mapping in twisted double bilayer graphene Jean Spièce, Roop Kumar Mech, Alessandra Canetta, Rebeca Ribeiro-Palau, Oleg Kolosov, Pascal Gehring Abstract Two-dimensional (2D) materials have attracted significant interest due to their tunable physical properties when stacked into heterostructures. Twisting adjacent layers introduces moiré patterns that strongly influence the material’s electronic and thermal behavior. In twisted graphene systems, the twist angle critically alters phonon transport, leading to reduced thermal conductivity compared to Bernal-stacked configurations. However, experimental investigations into thermal transport in twisted structures remain limited. Here, we study the local thermal properties of twisted double bilayer graphene (TDBG) using Scanning Thermal Microscopy (SThM). We find a reduction in thermal resistance of 0.3 ± 0.1 × 10 6 0.3\pm 0.1\times 10^{6} K W -1 compared to untwisted bilayers, attributed to changes in both intrinsic thermal conductivity and the tip–sample interface. These results, supported by analytical modeling, provide new insight into thermal transport mechanisms in twisted 2D systems and offer a pathway toward thermal engineering in twistronic devices. In recent years, two-dimensional (2D) materials have gained increasing attention. The atomic layers in these materials are held together by weak van der Waals forces, which makes them easy to cleave and stack into new heterostructures Geim and Grigorieva 2013 . Stacking different 2D layers can result in artificial systems with novel physical properties Sutter and Sutter 2021 ; Li, Zhou, and Zhang 2017 ; Wu et al. 2022 . Moreover, by twisting the layers with respect to each other, the periodicity of the resulting lattice changes, forming a so-called moiré pattern He et al. 2021 . This twist angle becomes a crucial parameter for tuning the band structure Ren et al. 2020 and the lattice symmetry of the new material Carr et al. 2017 ; Z. and S. 2021 . At small twist angles Kerelsky et al. 2019 , the mismatch between layers leads to atomic reconstruction, favoring energetically stable stacking configurations. This results in discrete stacking domains and domain walls Yoo et al. 2019 , which are predicted to significantly affect the local thermal properties of twisted 2D systems. The thermal conductivity of graphene is known to depend on the twist angle between its layers. Bernal-stacked (AB) graphene exhibits the highest thermal conductivity. Introducing a twist reduces this property: Li et al. Li et al. 2014 measured a 25% decrease at 34^{\circ} , while Han et al. Han et al. 2021 observed a 15% decrease at 2^{\circ} , both using optothermal Raman spectroscopy. These reductions are attributed to changes in low-frequency phonon transport and are supported by molecular dynamics simulations. Other studies Nie et al. 2019 ; Wang, Xie, and Chen 2017 ; Li et al. 2018a confirm that both in-plane and cross-plane thermal conductivities decrease as the twist angle increases. Despite its importance for device performance and stability, thermal transport in twisted graphene structures remains poorly explored experimentally. A quantitative understanding of how twist affects heat dissipation in graphene could lead to angle-engineered thermal interfaces and optimized thermal management in twistronic devices. However, experimental confirmation of these predictions is still lacking. Here, we investigate the local thermal properties of twisted double bilayer graphene (TDBG) using Scanning Thermal Microscopy (SThM). We observe a reduction in thermal resistance of TDBG by 0.3\pm 0.1\times 10^{6} KW -1 compared to untwisted double bilayer graphene. This reduction is attributed to changes in both thermal conductivity and tip–sample thermal interface. Our findings are supported by analytical modeling. Twisted double bilayer graphene consists of two AB-stacked bilayers placed on a 40 nm hexagonal boron nitride (hBN) substrate. The full structure is shown in Figure 1 a. When stacked, a small twist angle \theta ( <1^{\circ} ) is introduced between the bilayers, forming a moiré pattern of ABAB and ABCA domains, while suppressing the less stable ABBC regions Yoo et al. 2019 ; Li et al. 2021 . These domains are separated by saddle point (SP) boundaries. The TDBG was fabricated using a dry transfer method with a polycarbonate (PC) film (10% concentration) supported by a polydimethylsiloxane bubble stamp. Two halves of a bilayer graphene, pre-cut using an atomic force microscope Li et al. 2018b , were picked up sequentially with a relative twist angle of less than 1^{\circ} . The final stack was transferred onto a hBN flake at room temperature without melting the PC Gadelha et al. 2021 , minimizing contamination during the process. The moiré wavelength \lambda_{m} depends on the twist angle and is given by \lambda_{m}=(a/2)/\sin(\theta/2) , where a is the graphene lattice constant Kim et al. 2017 . Using piezoresponse force microscopy (PFM), we identified two regions with large moiré wavelengths (Figure 1 b). PFM is a useful tool to characterize twisted 2D systems due to their piezoelectric or flexoelectric responses McGilly et al. 2020 . In our PFM setup, an AC bias at the contact resonance frequency is applied between an electrically conductive AFM tip and the sample, generating a vertical electric field Canetta et al. 2023 ; Hong 2021 . This field induces piezoelectric strain, which is detected through the AFM lever’s torsion or deflection. Figures 1 c and 1 d show PFM maps of the two regions. From these maps, we estimate effective twist angles between 0.07^{\circ} and 0.15^{\circ} . Both regions display stretched triangular domains, which may indicate the presence of local strain or pinning at specific stacking sites Kerelsky et al. 2021 . Figure 1: (a) Total sample stack consisting of a hBN flake acting as substrate on which two graphene bilayers where stacked at a small angle. The whole 2D stack is resting on a 300 nm SiO 2 on Si wafer. (b) Topography map of the sample with the two regions showing large moiré patterns (highlighted by the dashed squares). Scale bar is 1 \mu m. (c) PFM small scale image of the first region in (b). Scale bar is 250 nm (d) PFM image of the other moiré region. Scale is 100 nm. To investigate thermal transport in our 2D system, we use Scanning Thermal Microscopy, as described in previous studies Evangeli et al. 2019 ; Spiece et al. 2022 . SThM is a powerful technique that enables nanoscale mapping of heat dissipation in low-dimensional materials. Its operation is based on a sharp, microfabricated cantilever that functions both as a heater and a temperature sensor. The probe is raster-scanned across the sample surface using standard atomic force microscopy (AFM) feedback to control the tip–sample interaction. Measurements were conducted under high vacuum conditions ( 10^{-6} Torr) using a sharp probe (tip radius \sim 30 nm), ensuring accurate thermal mapping without interference from air or water menisci Evangeli et al. 2019 ; Spiece et al. 2022 . We used commercially available doped silicon probes (Anasys Instruments, AN-300), which have a geometry similar to standard AFM probes, but with a cantilever composed of two highly doped, electrically conductive legs. These probes form part of a Wheatstone bridge circuit used to detect small changes in electrical resistance. A DC or AC voltage applied to the bridge heats the probe to a few tens of kelvin above room temperature. The output signal is amplified and calibrated to extract the probe temperature. Calibration details of both the thermal signal and probe resistance

Read the complete text