Reconstructing the Plasma Boundary with a Reduced Set of Diagnostics

M. S. Stokolesov \aff 1 \corresp, M. R. Nurgaliev \aff 1, I. P. Kharitonov \aff 1, E. V. Adishchev \aff 1, D. I. Sorokin \aff 1, R. Clark \aff 2, D. M. Orlov \aff 2 · 2025

Read Reconstructing the Plasma Boundary with a Reduced Set of Diagnostics by M. S. Stokolesov \aff 1 \corresp, M. R. Nurgaliev \aff 1, I. P. Kharitonov \aff 1, E. V. Adishchev \aff 1, D. I. Sorokin \aff 1, R. Clark \aff 2, D. M. Orlov \aff 2 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-10709.txt.

Introduction

Stokolesov and co-authors ask how few sensors a fusion device can get by with when tracing the edge of its plasma. The last closed flux surface marks that edge, and future power plants will have little room for diagnostics behind their shielding. Working with the DIII-D tokamak, their 2025 study trains neural networks on slimmed-down input sets to redraw that surface.

One model used only the currents in the machine's coils and missed the true edge by about four centimeters on average in held-out tests. Adding the plasma current and loop voltage cut the miss to about three centimeters. The trade is plain: a little more input buys a little more accuracy, but even the leanest set works respectably. The authors offer the result as hope for plants where sensors must stay scarce by design.

Catalog record

CREATORM. S. Stokolesov \aff 1 \corresp, M. R. Nurgaliev \aff 1, I. P. Kharitonov \aff 1, E. V. Adishchev \aff 1, D. I. Sorokin \aff 1, R. Clark \aff 2, D. M. Orlov \aff 2
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-10709

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reconstructing the Plasma Boundary with a Reduced Set of Diagnostics M. S. Stokolesov \aff 1 \corresp, M. R. Nurgaliev \aff 1, I. P. Kharitonov \aff 1, E. V. Adishchev \aff 1, D. I. Sorokin \aff 1, R. Clark \aff 2, D. M. Orlov \aff 2 Abstract This study investigates the feasibility of reconstructing the last closed flux surface (LCFS) in the DIII-D tokamak using neural network models trained on reduced input feature sets, addressing an ill-posed task. Two models are compared: one trained solely on coil currents and another incorporating coil currents, plasma current, and loop voltage. The model trained exclusively on coil currents achieved a mean point displacement of 0.04 0.04 m on a held-out test set, while the inclusion of plasma current and loop voltage reduced the error to 0.03 0.03 m. This comparison highlights the trade-offs between input feature complexity and reconstruction accuracy, demonstrating the potential of machine learning algorithms to perform effectively in data-limited environments, such as those expected in Fusion Power Plants (FPP) due to diagnostic constraints imposed by the presence of blankets and shielding. 1 Introduction In this study, we focus on reconstructing the plasma boundary, which is defined by the last closed flux surface (LCFS) of the confined plasma. The LCFS represents the transition between the closed magnetic field lines in the high-temperature, high-density confinement region of the plasma and the open field lines in the scrape-off layer of the plasma. The position of the plasma boundary, as defined by the LCFS, is not directly measured during experiments. Instead, it is inferred through plasma equilibrium reconstruction using data collected from sensors installed in the tokamak. These calculations are performed by specialized equilibrium reconstruction codes, such as EFIT ( Lao et al. 1985 ) , which is widely used for reconstructing equilibria in DIII-D discharges. In this work, we utilize EFIT data for training and evaluating machine learning (ML) models. A significant limitation of traditional equilibrium reconstruction methods is their computational cost, particularly when multiple repeated calculations are required. Surrogate modeling provides a promising solution to address this issue by significantly reducing computation time while maintaining comparable accuracy. There has been considerable progress in applying ML techniques to replace EFIT, most notably in the EFIT-AI project ( Lao et al. 2022 ; Madireddy et al. 2024 ) , which incorporates advanced methods and practices for reconstructing various plasma parameters, including the flux, toroidal current, and the full magnetic field distribution. However, the majority of existing works rely on comprehensive magnetics datasets, including signals from probes and flux loops, as input features for plasma boundary or full magnetic field distribution reconstruction ( Joung et al. 2019 ; Wai et al. 2022 ; Sun et al. 2024 ) . This reliance on a full set of magnetics data is common because it provides extensive constraints for plasma boundary reconstruction. Reducing the set of input parameters introduces additional challenges, as fewer constraints may lead to greater uncertainty in the reconstruction. Nevertheless, investigating models trained on limited diagnostic data is particularly relevant for data-limited environments, such as those anticipated in Fusion Power Plants (FPP), where diagnostic capabilities are constrained by the presence of blankets and shielding. In this work, we explore the feasibility of reconstructing the LCFS in the DIII-D tokamak using neural network (NN) models trained on reduced feature sets. What differentiates our approach is the minimal input data used to train the models. Specifically, we compare two models: one trained exclusively on coil currents and another incorporating coil currents, plasma current, and loop voltage. This comparison illustrates the trade-offs between input feature complexity and reconstruction accuracy, highlighting the potential of machine learning algorithms to operate effectively in data-limited environments. 2 Dataset The DIII-D discharge database encompasses a broad range of experimental data, including sensor measurements, EFIT equilibrium reconstructions, magnetic control system commands, and plasma state information. These data capture diverse experimental conditions, configurations, and control strategies. The data is recorded as high-resolution time series through an array of diagnostic systems installed in the tokamak, collecting key parameters such as magnetic fields, plasma temperature, and density. While coil currents \{I_{k}\}_{k=1}^{N_{\text{coils}}} , plasma current I_{\text{p}} , and loop voltage V_{\text{loop}} are measured during the discharge, the plasma geometry is automatically calculated post-shot using the EFIT equilibrium reconstruction code. In this study, we consider the state of the plasma, which is defined by plasma shape, current, and kinetic profiles, and the state of the tokamak, which we define by coil currents. For brevity, we will occasionally use the term "discharge state" to refer to a state that describes both the plasma and the tokamak. We employ neural network models based on Multi-Layer Perceptron (MLP) architectures, trained on historical EFIT data. The dataset consists of approximately 25,000 DIII-D discharges spanning 2004–2024, covering both positive (PT) and negative (NT) triangularities. The dataset was filtered to exclude discharges with missing EFIT signals, durations shorter than 1500 ms, or time steps exceeding 100 ms, resulting a final dataset of about 5 million discharge states used for training, validation, and testing. Top and bottom triangularity ( \delta_{\text{upper}} and \delta_{\text{lower}} ) characterize the deviation of the plasma boundary from an elliptical shape, where elongation ( \kappa ) defines the vertical stretching of the plasma and triangularity quantifies its indentation near the top and bottom. These parameters describe how much the plasma boundary deviates from an idealized elongated configuration and can be defined as: \delta_{\text{upper}}=\frac{R_{\text{geo}}-R_{\text{upper}}}{a}\text{,}\quad\delta_{\text{lower}}=\frac{R_{\text{geo}}-R_{\text{lower}}}{a}\text{,} where R_{\text{geo}}=\frac{R_{\text{max}}+R_{\text{min}}}{2} is the major radius of the plasma geometric center, R_{\text{upper}} and R_{\text{lower}} are the major radii of the highest and lowest points of the LCFS, a=\frac{R_{\text{max}}-R_{\text{min}}}{2} is the plasma minor radius, R_{\text{max}} and R_{\text{min}} are the maximum and minimum values of the major radius along the LCFS. The sign of \delta_{\text{upper}} and \delta_{\text{lower}} distinguishes between positive and negative triangularity regimes. A positive triangularity configuration ( \delta_{\text{upper}}>0,\delta_{\text{lower}}>0 ) corresponds to a plasma shape where the boundary is indented inward at the top and bottom, resulting in a D-shaped cross-section, which is commonly utilized in tokamaks to enhance plasma stability and confinement properties. Conversely, a negative triangularity configuration ( \delta_{\text{upper}}<0,\delta_{\text{lower}}<0 ) features outward-extending top and bottom regions, yielding a D -shaped cross-section. Recent studies suggest that negative triangularity plasmas may exhibit reduced turbulence and improved confinement under certain operational conditions. The DIII-D database contains many duplicated shots originating from repeated experiments. To ensure unbiased evaluation, it is critical to prevent duplicates from simultaneously appearing in the training, validation, or test sets. However, to our knowledge, no metadata exist that can reliably identify which shots belong to the same experiment or category, making duplicate identification challenging. To address this, we developed a data-driven method for detecting and removing duplicates. This approach involves two steps: first, each discharge is represented as a fixed-length sequence of discharge states; second, the discharges are clustered based on the similarity of these sequences. Using this method, we identified and removed approximately 30% of the shots in the initial dataset as duplicates. The signals in the DIII-D database are recorded as time series, typically with different timestamp resolutions. While these signals span the same time intervals, they are often sampled at varying discretization rates. To align the signals along a common timestamp dimension, we interpolated all signals (i.e.,

Read the complete text