Simulation and measurement of Black Body Radiation background in a Transition Edge Sensor
José Alejandro Rubiera Gimeno, Friederike Januschek, Axel Lindner, Christina Schwemmbauer, Katharina-Sophie Isleif, Manuel Meyer, Elmeri Rivasto, Gulden Othman, Rikhav Shah · 2025
Read Simulation and measurement of Black Body Radiation background in a Transition Edge Sensor by José Alejandro Rubiera Gimeno, Friederike Januschek, Axel Lindner, Christina Schwemmbauer, Katharina-Sophie Isleif, Manuel Meyer, Elmeri Rivasto, Gulden Othman, Rikhav Shah (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-08555.txt.
Introduction
José Rubiera Gimeno and co-authors measure the glow of warm hardware in an ultra-cold photon sensor. Their twenty twenty-five paper serves the ALPS two experiment in Hamburg, which hunts axion-like particles by shining light through a wall. A planned single-photon run needs a sensor of extreme quiet.
The tungsten transition edge sensor must catch single near-infrared photons with high yield and almost no false counts. Room-warm parts emit black body photons that fake signals. The team models that background and checks it against real runs. Knowing the fake rate to fine precision decides whether the delicate sensor route can confirm a hint of new physics.
Catalog record
| CREATOR | José Alejandro Rubiera Gimeno, Friederike Januschek, Axel Lindner, Christina Schwemmbauer, Katharina-Sophie Isleif, Manuel Meyer, Elmeri Rivasto, Gulden Othman, Rikhav Shah |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 46 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-08555
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Simulation and measurement of Black Body Radiation background in a Transition Edge Sensor José Alejandro Rubiera Gimeno, Friederike Januschek, Axel Lindner, Christina Schwemmbauer, Katharina-Sophie Isleif, Manuel Meyer, Elmeri Rivasto, Gulden Othman, Rikhav Shah Abstract The Any Light Particle Search II (ALPS II) experiment at DESY, Hamburg, is a Light-Shining-through-a-Wall (LSW) experiment aiming to probe the existence of axions and axion-like particles (ALPs), which are candidates for dark matter. Data collection in ALPS II is underway utilizing a heterodyne-based detection scheme. A complementary run for confirmation or as an alternative method is planned using single photon detection, requiring a sensor capable of measuring low-energy photons (1064 nm, 1.165 eV) with high efficiency (higher than 50 %) and a low background rate (below 7.7 ⋅ 10 − 6 cps 7.7\cdot 10^{-6}\,\mathrm{cps} ). To meet these requirements, we are investigating a tungsten Transition Edge Sensor (TES) provided by NIST, which operates in its superconducting transition region at millikelvin temperatures. This sensor exploits the drastic change in resistance caused by the absorption of a single photon. We find that the background observed in the setup with a fiber-coupled TES is consistent with Black Body Radiation (BBR) as the primary background contributor. A framework was developed to simulate BBR propagation to the TES under realistic conditions. The framework not only allows the exploration of background reduction strategies, such as improving the TES energy resolution, but also reproduces, within uncertainties, the spectral distribution of the observed background. These simulations have been validated with experimental data, in agreement with the modeled background distribution, and show that the improved energy resolution reduces the background rate in the 1064 nm signal region by one order of magnitude, to approximately 10 − 4 cps 10^{-4}\,\mathrm{cps} . However, this rate must be reduced further to meet the ALPS II requirements. Preprint: APS/123-QED I Introduction Axions and axion-like particles (ALPs) are hypothetical pseudo-scalar bosons proposed in theories beyond the Standard Model [ 1 ] . Light-shining-through-a-wall (LSW) experiments [ 2 , 3 ] constitute a model-independent method to search for these particles by probing their interaction with photons, characterized by the coupling strength g_{a\gamma\gamma} . In LSW experiments, photons are converted into ALPs within a magnetic field (Primakoff effect) and back into photons of the same energy as the primary within another magnetic field (Sikivie effect) [ 2 , 3 ] . The Any Light Particle Search II (ALPS II) experiment at Deutsches Elektronen-Synchrotron (DESY) [ 4 ] is a second-generation LSW experiment. It is designed to improve sensitivity to the coupling g_{a\gamma\gamma} by a factor of 10^{3} compared to earlier experiments [ 5 , 6 ] through the use of high-finesse optical cavities and a longer magnet string, targeting g_{a\gamma\,\gamma}\,=\,2\,\cdot 10^{-11}\,\mathrm{GeV^{-1}} . This target is motivated by astrophysical anomalies, such as stellar evolution [ 7 ] . Within the ALPS II experiment, for a 1064 nm photon rate equivalent to 30 W of laser power and g_{a\gamma\,\gamma}=2\,\cdot\,10^{-11}\,\mathrm{GeV^{-1}} , a signal from reconverted photons of 10^{-24}\,\mathrm{W} , or about 10^{-5}\,\mathrm{cps} —roughly one photon per day, would be expected [ 8 ] . To detect these photons, two methods have been investigated: heterodyne (HET) [ 9 ] and single photon detection [ 4 , 10 ] . ALPS II is currently using HET for data taking, with single photon counting detection as a confirmation or alternative sensing scheme having very different systematics. For a single photon detection scheme, the system must detect photons with 1.165\,\mathrm{eV} energy at 10^{-5}\,\mathrm{cps} . Additionally, to achieve 5\sigma significance in ALP detection within 20 days, the detector needs over 50 % efficiency and a background rate below 7.7\cdot 10^{-6}\,\mathrm{cps} [ 4 , 10 ] . A Transition Edge Sensor (TES) is being studied as a strong candidate to meet these requirements. This paper focuses on the minimization of background rates, particularly from Black Body Radiation (BBR). We present the development of a simulation framework for modeling BBR propagation to the TES and evaluate the contribution of BBR to the overall TES background. With the simulation framework, we are also able to model the impact of the strategies for background reduction. We discuss the results of the ongoing efforts to enhance the TES energy resolution through the optimization of the data analysis, which impacts the background rate measured with the TES. This paper is organized into six sections. Section II provides details of the TES measurement setup. Section III describes the theoretical and experimental aspects of the BBR simulation framework, which models the propagation of Black Body Radiation to the TES. Section IV demonstrates an example application of the framework, adapted to the specific experimental conditions outlined in Section V . In Section V , the analysis of measured background data is explained. Furthermore, a comparison between simulation predictions and experimental results is made. Finally, the key conclusions of this paper and the next steps for future work are presented in Section VI . II TES setup A Transition Edge Sensor (TES) is a cryogenic microcalorimeter that operates in the transition region between superconducting and normal conducting states [ 11 ] . It responds to energy depositions with an abrupt change in resistance, generating a measurable signal. In our setup, the TES consists of a tungsten microchip provided by the National Institute of Standards and Technology (NIST), USA. The TES has dimensions of 25\penalty\ \mathrm{\upmu m}\times 25\penalty\ \mathrm{\upmu m}\times 20\penalty\ \mathrm{nm} , a critical temperature around 140\penalty\ \mathrm{mK} , and is optimized for 1064 nm photon detection. The signal produced in the TES due to energy deposition is measured as a voltage signal using a readout system based on a two-stage Superconducting Quantum Interference Device (SQUID) provided by Physikalisch-Technische Bundesanstalt (PTB), Berlin, Germany, and SQUID electronics from Magnicon. The TES and the SQUID cold components are housed within a Bluefors dilution refrigerator operating at a base temperature of 25\penalty\ \mathrm{mK} . For more details on the setup, see [ 12 ] . Photons are guided to the TES via an optical fiber from outside the cryostat. To characterize the TES response at the ALPS II operating wavelength, light from a 1064 nm laser is introduced into the system, highly attenuated to avoid saturating the sensor. This is adjusted using several attenuators to minimize pile-up effects in the data [ 13 ] . In the extrinsics measurement, the background is assessed by connecting the TES to the optical fiber while leaving the other end of the fiber covered at room temperature [ 13 ] . Under these conditions, using the same acquisition settings as in the 1064 nm laser measurements, a trigger rate on the order of 10^{-2}\penalty\ \mathrm{cps} is observed. This rate is expected to be primarily due to BBR from the laboratory environment coupling into the fiber [ 14 ] . A framework to compute the expected contribution of BBR will be described in the following. III A framework to simulate BBR propagating to the TES We have developed a Python framework to compute the BBR photons propagating through the optical fiber to the TES. The model for the simulation is built by considering the theory of BBR production, optical components in the TES setup acting like a filter, and the TES response. The individual parts