AI-Driven Digital Twins: Optimizing 5G/6G Network Slicing with NTNs

Afan Ali and Hüseyin Arslan · 2025

Read AI-Driven Digital Twins: Optimizing 5G/6G Network Slicing with NTNs by Afan Ali and Hüseyin Arslan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-08328.txt.

Introduction

Afan Ali and Huseyin Arslan propose a smart twin to tune network slices for space linked 5G and 6G, in a paper from 2025. Slices carve one network into grades of service, but craft in orbit move fast and traffic swings hard, so fixed shares waste stock. The twin keeps a live copy of the network state that a learning agent can test moves on.

The agent shifts band width for the fast data slice by trial and reward, with the twin used to look ahead. Runs show wait time cut by a quarter next to fixed shares, with stock used more fully. The authors pitch the build for hard cases such as quake relief and city dead zones where ground links fail.

Catalog record

CREATORAfan Ali and Hüseyin Arslan
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-08328

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

AI-Driven Digital Twins: Optimizing 5G/6G Network Slicing with NTNs The authors are with the Department of Electrical and Electronics Engineering, Istanbul Medipol University, Istanbul, 34810, Turkey (e-mail: [email protected]; [email protected]). Afan Ali and Hüseyin Arslan Abstract Network slicing in 5G/6G Non-Terrestrial Network (NTN) is confronted with mobility and traffic variability. An artificial intelligence (AI)-based digital twin (DT) architecture with deep reinforcement learning (DRL) using Deep deterministic policy gradient (DDPG) is proposed for dynamic optimization of resource allocation. DT virtualizes network states to enable predictive analysis, while DRL changes bandwidth for eMBB slice. Simulations show a 25% latency reduction compared to static methods, with enhanced resource utilization. This scalable solution supports 5G/6G NTN applications like disaster recovery and urban blockage. I Introduction The evolution of the 5G and launch of 6G networks have ushered in a new era for wireless communication, motivated by the need to support multiple applications with stringent requirements, including enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC) and massive machine-type communications (mMTC) [ 1 ] . Network slicing, one of the foundations of such networks, enables virtualized and isolated network instances to be customized to the various service demands, with optimally guaranteed resource allocation and quality of service (QoS) [ 2 ] . The dynamic nature of future networks, particularly with the integration of Non-Terrestrial Networks (NTNs) such as unmanned aerial vehicles (UAVs) and satellites, presents tremendous challenges in the form of mobility-induced channel fluctuation, dynamic traffic demands, and energy constraints [ 3 ] . Digital twins (DTs) have been a revolutionary technology in addressing these issues by providing a current virtual replica of physical network components, such as, base stations, user equipment (UEs), and communication channels [ 4 ] . Through high-fidelity modeling and real-time data synchronization, DTs enable proactive monitoring, predictive analytics, and adaptive resource management, making them appropriate for network slicing in dynamic environments. For instance, in the case of NTN scenarios, DTs may simulate the mobility behavior of UAV-mounted flying base stations (FBSs) in order to predict peak traffic in regions of disasters wherein ground base station (gBS) communications are disrupted [ 5 ] . This capability plays a significant role in ensuring that there is constant connectivity and latency-limited capability, especially with eMBB services like high definition (HD) video or augmented reality (AR). The combination of Artificial Intelligence (AI) with DTs, increases their capabilities further by adding intelligent decision-making to network optimization and resource allocation. Deep reinforcement learning (DRL) methods can make DTs learn and create optimal policies for resource block (RB) scheduling and bandwidth allocation in dynamic networks and outperform traditional static or heuristic-based methods [ 6 ] . Moreover, 6G networks is set to introduce additional sophistication with requirements like Integrated Sensing and Communication (ISAC), which demands sensing quality and communication efficiency to be optimized simultaneously, alongwith energy-efficient design to support green communication [ 7 ] . AI, together with DTs, provide a scalable solution to deal with such advanced requirements, as envisioned for future wireless systems in the 3GPP [ 1 ] . This letter introduces a novel AI-driven DT approach for dynamic network slicing in 5G and 6G networks. The proposed framework particularly focus on latency optimization of eMBB slices in NTN-integrated environments. Our approach employs DRL based deep deterministic policy gradient (DDPG) algorithm, for dynamically adjusting RBs and bandwidth allocation based on varying traffic demands in real time, CSI, and FBS mobility models. The main contributions of this work can be summarized as follows: • Our proposed framework introduces a real-time DT synchronization mechanism that maintains an accurate virtual representation of the physical network. Unlike existing DT approaches that often rely on static models or delayed updates, we are the first one to devise a mechanism to update states of DT every \Delta t time steps, incorporating real-time network measurements. • Our proposed method comprises of a DRL-based adaptation strategy using the DDPG algorithm to dynamically adjust bandwidth allocation in continuous action spaces, a significant advancement over discrete-action DRL methods, addressing the limitations of heuristic-based approaches. • The framework explicitly models NTN dynamics, such as FBS mobility and blockages, to ensure robust performance. The DRL agent optimizes bandwidth allocation under these conditions, achieving good resource utilization. The proposed framework is particularly suited for disaster recovery scenarios and urban environments with frequent signal obstructions. II System Model We consider a 5G/6G network comprising a gBS and a UAV-based FBS serving a set of M UEs within an eMBB slice. The network employs orthogonal frequency-division multiplexing (OFDM) with a total bandwidth B divided into N RBs. Fig. 1 illustrates the system model with the network architecture. The DT maintains a virtual representation of the physical network, capturing UE positions, CSI, FBS mobility, and traffic demands. Fig. 1 : System Model: Network architecture with gBS, FBS, UEs and DT interactions. The distance, d_{i}(t) , between the UE i and the FBS accounts for its mobility, and can be written as: d_{i}(t)=\sqrt{(x_{i}-x_{\text{FBS}}(t))^{2}+(y_{i}-y_{\text{FBS}}(t))^{2}+h_{\text{FBS}}^{2}}, (1) where (x_{i},y_{i}) and (x_{\text{FBS}}(t),y_{\text{FBS}}(t)) are the coordinates of i -th UE and the FBS, respectively, and h_{\text{FBS}} is the FBS altitude. II-A Channel Model The channel gain h_{i}(t) for UE i is modeled as: h_{i}(t)=\sqrt{\frac{\kappa}{d_{i}(t)^{\beta}}}g_{i}(t), (2) where \kappa is the path-loss constant, \beta is the path-loss exponent, and g_{i}(t)\sim\mathcal{CN}(0,1) is the small-scale fading coefficient following a Rayleigh distribution. Interference I_{i} experienced by UE i includes contributions from other UEs and NTN nodes: I_{i}=\sum_{j\neq i}^{M}P_{j}|h_{j,i}|^{2}+I_{\text{NTN}}, (3) where h_{j,i} is the channel gain from UE j to the base station serving UE i , and I_{\text{NTN}}\sim\mathcal{N}(0,\sigma_{\text{NTN}}^{2}) models interference from other NTN nodes, such as, satellites. II-B FBS Mobility The FBS position, \text{pos}_{i} , varies over time to follow the spatial location of UEs and their corresponding traffic loads, which influence the distance D_{i}(t) between the FBS and the i -th UE as modeled in ( 1 ). The distance influences the channel gain h_{i}(t) in ( 2 ), which is a key factor in determining the signal-to-interference and noise ratio (SINR) and subsequently the achievable rate. The DT tracks FBS mobility dynamically, fine-tuning the state s_{t} according to the real-time network conditions so that the DRL Agent can make data-informed decisions on resource allocation optimally. We take into account that the trajectory of the FBS is defined with velocity \mathbf{v}_{\text{FBS}}(t)=(v_{x}(t),v_{y}(t)) , which is updated as: \displaystyle x_{\text{FBS}}(t+\Delta t)=x_{\text{FBS}}(t)+v_{x}(t)\Delta t, (4) \displaystyle y_{\text{FBS}}(t+\Delta t)=y_{\text{FBS}}(t)+v_{y}(t)\Delta t, where v_{x}(t) and v_{y}(t) is constrained by \sqrt{v_{x}(t)^{2}+v_{y}(t)^{2}}\leq v_{\text{max}} . To optimize coverage, we minimize the average distance to UEs as follows: J_{\text{FBS}}(t)=\frac{1}{M}\sum_{i=1}^{M}d_{i}(t), (5) s.t. x_{\text{FBS}}^{\text{min}}\leq x_{\text{FBS}}(t)\leq x_{\text{FBS}}^{\text{max}},\quad y_{\text{FBS}}^{\text{min}}\leq y_{\text{FBS}}(t)\leq y_{\text{FBS}}^{\text{max}}. (6) Consequently, velocity updates use gradients as shown below: \displaystyle v_{x}(t) \displaystyle=-\eta\frac{\partial J_{\text{FBS}}}{\partial x_{\text{FBS}}}=-\eta\frac{1}{M}\sum_{i=1}^{M}\frac{x_{\text{FBS}}(t)-x_{i}}{d_{i}(t)}, (7) \displaystyle v_{y}(t) \displaystyle=-\eta\frac{\partial J_{\text{FBS}}}{\partial y_{\text{FBS}}}=-\eta\frac{1}{M}\sum_{i=1}^{M}\frac{y_{\text{FBS}}(t)-y_{i}}{d_{i}(t)}, (8) where \eta is a step size. II-C Achievable Rate and Latency The achievable rate and latency defines key performance metrics for network slicing in 5G/6G. The achievable rate R_{i}(t) for the i -th UE at time t is derived from the Shannon capacity formula [ 8 ] , which defines the maximum data rate over a bandwidth B given a SINR: \displaystyle C \displaystyle=B\log_{2}(1+\text{SINR}), (9) where C is the capacity. For the i -th UE, we replace C with R_{i}(t) and B with the allocated bandwidth B_{i} . The SINR is influenced by the channel

Read the complete text