Measurement of Multilayer Coating Thickness on Interwoven Carbon-Fiber-Reinforced Polymers Using the Terahertz PHASR Scanner

Arash Karimi, Zachery B. Harris, Erica Heller, Paul Vahey, M. Hassan Arbab, Member, IEEE · 2025

Read Measurement of Multilayer Coating Thickness on Interwoven Carbon-Fiber-Reinforced Polymers Using the Terahertz PHASR Scanner by Arash Karimi, Zachery B. Harris, Erica Heller, Paul Vahey, M. Hassan Arbab, Member, IEEE (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-08172.txt.

Introduction

Arash Karimi and four co-authors measure paint thickness on carbon-fiber aircraft material with a handheld terahertz scanner, seeing through opaque coatings. Their 2025 paper attacks two headaches: normally you must know each layer's refractive index in advance, and the woven carbon substrate reflects the signal in messy, direction-dependent ways.

Their polarimetric scanner plus a physics-based linear model, trained on a small subset of the sample itself, sidesteps the index problem. Sparse deconvolution times the returning pulses. Across the scanner's useful band the method hit about ten micrometers of error and better than 92 percent accuracy. The weave pattern and fiber direction measurably bent the results, so the polarimetric approach is not optional for such parts. The authors pitch the kit for real inspection lines.

Catalog record

CREATORArash Karimi, Zachery B. Harris, Erica Heller, Paul Vahey, M. Hassan Arbab, Member, IEEE
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-08172

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Measurement of Multilayer Coating Thickness on Interwoven Carbon-Fiber-Reinforced Polymers Using the Terahertz PHASR Scanner Arash Karimi, Zachery B. Harris, Erica Heller, Paul Vahey, M. Hassan Arbab, Member, IEEE Abstract Coating thickness measurement and inspection of defects beneath optically opaque surfaces are among the most promising commercial applications of the terahertz (THz) imaging technology. However, there are two main sources of complexity in THz spectral measurements that have resulted in reduced accuracy and high uncertainty in the determination of coating thicknesses. These factors include: 1. The need for a priori knowledge of the complex index of refraction of each coating layer, and 2. The complex and polarization-sensitive reflectivity of samples with carbon-fiber-reinforced polymer (CFRP) substrates. In this paper, we propose a combined hardware and software solution to address these two limitations. We employ the polarimetric version of our Portable HAndheld Spectral Reflection (PHASR) Scanner and use a novel training model on time-of-flight measurements obtained by sparse deconvolution of the THz time-domain pulses. Our method does not depend on separate measurement of the index of refraction of the coating layers; rather, it relies on a physics-based linear model, trained using a small subset of the sample data. We show that thickness measurements with mean square error of about 10 μ \mu m and accuracy of more than 92% can be achieved when the useful bandwidth of the scanner is limited to about 1.5 THz using photoconductive antenna emitters and detectors. We show that the anisotropic response of the carbon fiber bundles and the weave pattern structure of the substrate can significantly influence the accuracy of the coating measurement, and therefore a polarimetric imaging approach should be used for inspection of similar samples. PubID: pubid: 0000–0000/00$00.00 © 2021 IEEE I Introduction TERAHERTZ spectroscopy is an emerging imaging technology that has promised great applications during the past few decades. Due to its non-ionizing, non-destructive, and non-contact nature [ 1 , 2 , 3 , 4 ] , THz imaging has drawn attention in biomedical imaging [ 5 , 6 , 7 , 8 , 9 ] , security [ 10 , 11 , 12 , 13 ] , and non-destructive testing (NDT) for in-line quality control inspection [ 14 , 15 , 16 ] , among others. Since many industrial dielectric materials are transparent in the THz regime, these wavelengths have been suitable as an NDT technology for defect identification [ 17 , 18 , 19 ] and contamination detection [ 20 , 21 , 22 ] , material characterization [ 23 , 24 , 25 , 26 , 27 , 28 ] , and coating thickness measurement [ 29 , 30 , 31 ] . THz techniques have found applications in electronics [ 32 , 33 , 34 ] , pharmaceutical [ 35 , 36 , 37 ] , automotive [ 38 , 39 , 40 ] , aerospace [ 41 , 42 , 43 , 44 ] , and many other industries. The measurement of the thickness of multilayer coatings is an unmet need for cost and quality optimization in many advanced manufacturing industries. Traditional technologies used in aerospace and automotive sectors are eddy current, microcomputed X-ray tomography (XCT), and ultrasonic imaging [ 29 , 45 ] . Eddy current-based methods are limited to metal substrates and can only measure the total coating thickness [ 45 , 46 ] . Ultrasonic imaging can be used to evaluate metallic and dielectric substrates, but requires direct contact with the sample and has limited resolution [ 29 ] . In addition to safety considerations for X-rays, materials with low atomic numbers (e.g., carbon) show a poor contrast in this frequency regime [ 47 ] , making XCT unsuitable for many NDT applications. In other words, carbon composite materials have an attenuation coefficient in X-ray frequencies close to that of epoxy resin, making the use of XCT challenging for related applications [ 48 ] . Therefore, there is a deficiency in the performance of currently available technologies for direct coating thickness measurement on carbon fiber substrates, which can be addressed using THz time-domain spectroscopy (THz-TDS) imaging. Further, polarization information of the THz light provides a deeper understanding of the structure of anisotropic samples, such as interwoven CFRP. Carbon fibers can act as imperfect wire-grid polarizers in the THz frequencies, and depending on the relative polarization of the incident THz beam, they can reflect the light almost fully or partially. Moreover, the uneven surface of the interwoven carbon fibers requires careful consideration of spatial information for either inspection of delamination or measurement of coating thicknesses. Studies have shown promising results on the use of THz-TDS in CFRP structures for defect detection [ 41 , 49 ] and measurement of coating thickness [ 50 ] in such samples. However, because of the anisotropic structure of interwoven CFRPs, there is a need for polarimetric THz imaging. Therefore, this need has led us to develop and calibrate the polarimetric version of our Portable HAndheld Spectral Reflection (PHASR) Scanner, using two orthogonally oriented photoconductive antenna (PCA) detectors separated by a polarizing beam splitter [ 51 , 52 ] . The fast THz full-spectral imaging capability of the PHASR Scanner has already been demonstrated during in vivo burn severity diagnosis [ 53 , 54 , 55 ] , corneal imaging studies [ 56 ] , etc. Using the polarization sensitive version of the PHASR Scanner, we recently showed that polarimetric imaging of interwoven CFRP adds deeper insight into such anisotropic structures [ 57 ] . In this work, we will demonstrate the ability of the PHASR Scanner for rapid in-line imaging of complex aerospace samples fabricated with interwoven carbon fibers in the substrates using the new polarimetric capability. Aside from a hardware solution for the THz imaging modality in NDT applications, we propose a novel algorithm to measure the thickness of multilayer coatings using a linear regression training model. Various signal processing approaches have been introduced to extract thickness of multilayer coatings. These approaches include time-of-flight analysis of THz echoes, which requires accurate knowledge of the optical properties of the layers [ 58 ] , and numerical fitting algorithms, which are able to extract both the thickness and the optical properties of coating layers by modeling the beam propagation in the multilayered structure [ 38 ] . However, these methods are computationally expensive or require measurements from a calibration set to determine the complex refractive index of each coating layer. Furthermore, uneven and patterned substrates made of interwoven CFRP add additional complexity to these models. Finally, according to Fresnel’s reflection law, separate echoes from each coating layer can be observed because of a difference in the refractive indices of these layers. However, having layers with similar refractive indices in THz frequencies, or thicknesses smaller than the time-of-flight associated with the full-width-at-half-maximum of the THz pulses, can increase the uncertainty of parameter extraction. If the reflected echoes are not well separated in the time domain, it would be challenging to extract both the refractive index and, consequently, the thickness of layers from the overlapped echoes. To overcome this limitation, optimization algorithms have been introduced [ 38 , 50 , 59 ] . In this paper, first, we will present THz polarimetric imaging of

Read the complete text