An Ultra-Sub-Wavelength Microwave Polarization Switch Implemented with Directed Surface Acoustic Waves in a Magnonic Crystal

Raisa Fabiha, Erdem Topsakal, Supriyo Bandyopadhyay · 2025

Read An Ultra-Sub-Wavelength Microwave Polarization Switch Implemented with Directed Surface Acoustic Waves in a Magnonic Crystal by Raisa Fabiha, Erdem Topsakal, Supriyo Bandyopadhyay (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-07996.txt.

Introduction

Flipping the polarization of a radio beam lets one channel carry two signals, but microwave switches are usually far larger than the wavelength they handle. Raisa Fabiha, Erdem Topsakal, and Supriyo Bandyopadhyay report a switch far smaller than the wavelength, built from an array of tiny magnetic islands on a piezoelectric base. A sound wave sent across the base stirs spin waves in the islands, which then radiate the radio beam.

In certain directions, reversing the sound wave's travel between two crosswise paths rotates the beam's polarization by about ninety degrees. A sender and receiver placed along one of those directions, known only to them, could swap bits encoded in the polarization without encryption. The authors present the device as a route to covert point-to-point links, and as a first of its kind at microwave sizes.

Catalog record

CREATORRaisa Fabiha, Erdem Topsakal, Supriyo Bandyopadhyay
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE15 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-07996

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

An Ultra-Sub-Wavelength Microwave Polarization Switch Implemented with Directed Surface Acoustic Waves in a Magnonic Crystal Raisa Fabiha, Erdem Topsakal, Supriyo Bandyopadhyay Abstract The ability to switch the polarization of a transmitted electromagnetic wave from vertical to horizontal, or vice versa, is of great technological interest because of its many applications in long distance communication. Binary bits can be encoded in two orthogonal polarizations and transmitted securely from point to point. Polarization switches, however, are usually much larger than the wavelength of the electromagnetic wave. Consequently, most research in this area has focused on the optical regime where the wavelength is relatively short ( ∼ \sim 1 μ \mu m), so that the switch being much larger than the wavelength is not too inconvenient. However, this changes in the microwave regime where the wavelength is much larger (typically > > 1 cm). That makes a microwave ultra-sub-wavelength polarization switch very attractive. Here, we report such a switch made of an array of magnetostrictive nanomagnets ( ∼ \sim 100 nm lateral dimension) deposited on a piezoelectric substrate to make an “artificial magnonic crystal”. A surface acoustic wave (SAW) launched in the substrate with suitable electrodes excites spin waves in the nanomagnets via phonon-magnon coupling, resulting in radiation of electromagnetic waves via magnon-photon coupling. The polarization of the beam radiated in a given direction at a given frequency can be rotated through ∼ \sim 90 ∘ by changing the direction of SAW propagation in the substrate to implement the polarization switch. \papertype Original Article \paperfield Journal Section \corraddress Supriyo Bandyopadhyay, Department of Electrical and Computer Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA \corremail [email protected] \fundinginfo Virginia Commonwealth University Commercialization Fund, Commonwealth Cyber Initiative Faculty Fellows Program keywords polarization switch, ultra-sub-wavelength magneto-elastic antenna, magnonic crystal, surface acoustic wave 1 Introduction In quantum communication, information is encoded in the polarization of a photon for quantum key distribution and other tasks that call for an unconditionally secure link. In classical communication, encoding information in the polarization of an electromagnetic wave offers some advantages as well, such as polarization encoded secret sharing [ 1 , 2 ] and multiple data streams sent on the same frequency channel using different polarization states to save bandwidth. The latter is known as polarization division multiplexing which is used in satellite communication but could be also used in on-chip communication to reduce both bandwidth and component count. For digital data transmission via two orthogonal polarizations encoding bits 0 and 1, one would require a polarization switch that will switch the polarization of an electromagnetic wave from approximately horizontal (encoding the bit 0) to approximately vertical (encoding the bit 1), or vice versa. Polarization purity is not a concern for such applications. As long as the two polarizations are distinguishable (i.e., approximately orthogonal), it will suffice. Most polarization switches work at optical frequencies and are implemented with various techniques such as rotating waveplates [ 3 ] , Babinet-Soleil compensators [ 4 ] , Berek rotary compensators [ 5 ] , fiber coil polarization controllers [ 6 ] , Faraday rotators [ 7 ] , degree of polarization generators [ 8 ] , lithium niobate electro-optics [ 9 ] , liquid crystals [ 10 ] , digital micromirrors [ 11 ] , graphene metasurfaces [ 12 ] and on-chip photonic circuits [ 13 , 14 , 15 ] . All of the above constructions are typically much larger than the wavelength. While this is less of a problem in the domain of optics where the wavelength is usually 1 -10 \mu m, it is a serious problem in the microwave frequency region where the wavelength can be several cm. Therefore, sub-wavelength polarization switches are very attractive for the microwave regime. Here, we demonstrate a microwave polarization switch (working at 1-30 GHz) that is orders of magnitude smaller than the wavelength. This can have applications in ultra-compact polarization division multiplexers and digital data transmitters in the microwave range. Figure 1: Schematic of the polarization switch. A two-dimensional periodic array of magnetostrictive nanomagnets is delineated on a piezoelectric substrate. The different pairs of electrodes, such as (3,4) or (5,6) can be connected to a microwave voltage source to launch surface acoustic waves (SAWs) in different directions. The polarization of the radiated electromagnetic beam in any given direction at any given microwave frequency depends on the direction of SAW propagation. Thus, by switching the electrode pairs, one can switch the polarization. Reproduced from [ 16 ] with the permission of IEEE. Figure 2: Radiation patterns (gain in db) in the plane of the nanomagnets at different SAW excitation frequencies when the microwave source to launch the SAW is connected between two different electrode pairs in order to make the SAW propagate along two different directions. (a) “orientation 1” is defined as the case when the microwave source is connected between electrodes 3 and 4 to launch a SAW propagating parallel to the major axes of the elliptical nanomagnets, while “orientation 2” refers to the case when the microwave source is connected between electrodes 5 and 6 to launch a SAW propagating parallel to the minor axes of the elliptical nanomagnets (b) Definition of the “directions” for the radiation pattern; 0 ∘ is along the minor axes and 90 ∘ is along the major axes of the nanomagnets. (c) Radiation patterns for horizontal polarization for both “orientations”. (d) Radiation patterns for vertical polarization for both “orientations”. Note that the radiation pattern is “orientation”-dependent, meaning that it depends on the direction of SAW propagation. Reproduced from [ 16 ] with permission of the IEEE. Figure 3: Radiation patterns for horizontal and vertical polarizations (gain in absolute units, as opposed to dbi) in the plane of the nanomagnets at different SAW excitation frequencies when the microwave source to launch the SAW is connected between two different electrode pairs in order to make the SAW propagate along two different directions designated as “orientation 1” and “orientation 2”. Figure 4: Radial plot (in radians) of the polarization angle \theta in the plane of the nanomagnets at different frequencies for two mutually perpendicular directions of SAW propagation labeled as “orientation 1” and “orientation 2”. The far right panel shows that if we place the detector at 75 ∘ angle in the plane of the nanomagnets, then at 5.9 GHz frequency, we will receive and detect two mutually orthogonal polarizations if we switch the direction of SAW propagation from “orientation 1” to “orientation 2” by switching the electrode pairs used to launch the SAW. 2 Results and Discussion The structure of the polarization switch is shown in Fig. 1 . It consists of a periodic two-dimensional array of magnetostrictive nanomagnets (made of cobalt) deposited on a piezoelectric substrate (LiNbO 3 ). This is a periodic system for a spin wave (magnons) in the nanomagnets and hence it is called an “artificial magnonic crystal”. It is the same system that was used in ref. [ 17 ] for beam steering. Here, it is used for a different purpose, namely polarization switching. All antenna properties such as the scattering parameter S_{11} spectrum, radiation efficiencies at different frequencies, etc. can be found in refs. [ 16 , 17 ] . The LiNbO 3 substrate is

Read the complete text