Unraveling Exciton Trap Dynamics and Nonradiative Loss Pathways in Quantum Dots via Atomistic Simulations

Bokang Hou, Salvatore Gatto, Samuel L. Rudge, Johan E. Runeson, Michael Thoss, Eran Rabani · 2025

Read Unraveling Exciton Trap Dynamics and Nonradiative Loss Pathways in Quantum Dots via Atomistic Simulations by Bokang Hou, Salvatore Gatto, Samuel L. Rudge, Johan E. Runeson, Michael Thoss, Eran Rabani (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-07230.txt.

Introduction

Bokang Hou and co-authors simulate how surface flaws drain light energy from quantum dots, in a 2025 paper. Quantum dots are tiny crystals that glow, but defects on their skin trap excited states and waste energy as heat. The team built an atom-level model of a two-layer dot with a single hole trap, left by one unshielded sulfur atom.

By tuning the trap's depth and the energy cost of rearranging around it, they mapped the relaxation routes. One lone defect spawned a rich ladder of states. Depending on settings, trapping was slow and off-resonance or fast and cascading through gap states. Lattice shifts and vibration coupling set the balance between glow and loss. Surface repair is the practical moral.

Catalog record

CREATORBokang Hou, Salvatore Gatto, Samuel L. Rudge, Johan E. Runeson, Michael Thoss, Eran Rabani
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-07230

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Unraveling Exciton Trap Dynamics and Nonradiative Loss Pathways in Quantum Dots via Atomistic Simulations Bokang Hou, Salvatore Gatto, Samuel L. Rudge, Johan E. Runeson, Michael Thoss, Eran Rabani Abstract Surface defects in colloidal quantum dots are a major source of nonradiative losses, yet the microscopic mechanisms underlying exciton trapping and recombination remain elusive. Here, we develop a model Hamiltonian based on atomistic electronic calculations to investigate exciton dynamics in CdSe/CdS core/shell QDs containing a single hole trap introduced by an unpassivated sulfur atom. By systematically varying the defect depth and reorganization energy, we uncover how defect-induced excitonic states mediate energy relaxation pathways. Our simulations reveal that a single localized defect can induce a rich spectrum of excitonic states, leading to multiple dynamical regimes, from slow, energetically off-resonant trapping to fast, cascaded relaxation through in-gap defect states. Crucially, we quantify how defect-induced polaron shifts and exciton-phonon couplings govern the balance between efficient radiative emission and rapid nonradiative decay. These insights clarify the microscopic origin of defect-assisted loss channels and suggest pathways for tailoring QD optoelectronic properties via surface and defect engineering. Colloidal semiconductor nanocrystal (NC) quantum dots (QDs) have gained significant interest in both fundamental research and technological applications owing to their size-dependent optical and electronic properties. Kagan et al. 2016 ; Liu et al. 2021 ; Kim et al. 2024 Quantum confinement in these NCs results in discrete energy levels for electrons and holes, creating quantized excitonic states with tunable absorption and photoluminescence (PL) characteristics. Brus 1984 ; Murray et al. 1993 Although these properties have facilitated the development of QD-based devices like LEDs, lasers, and solar cells, Park et al. 2021 ; Lee et al. 2022 ; Carey et al. 2015 a persistent challenge remains in enhancing photon emission efficiency or the photoluminescence quantum yield (PLQY) in such devices Hanifi et al. 2019 , which is often limited by the presence of surface defect/trap states. Orfield et al. 2015 ; Giansante and Infante 2017 ; Baek et al. 2024 ; Steenbock et al. 2024 Different types of defect states can be formed during the synthesis of colloidal NCs, where the lack of ligand coordination, surface oxidation, atomic vacancies, and stoichiometry are known to introduce localized states at the NC surface. Houtepen et al. 2017 ; Brawand et al. 2017 ; Goldzak et al. 2021 These surface states trap either an electron or a hole, depending on the chemical environment of the surface atom and depending on the ligand passivation. Giansante and Infante 2017 ; Houtepen et al. 2017 ; Yan et al. 2020 Those traps states can be highly dynamical Utterback et al. 2016 ; Cline et al. 2018 and strongly affect carrier dynamics in NCs and NC-based devices. Allan and Delerue 2009 ; Delerue and Lannoo 2013 ; Bozyigit et al. 2013 The surface states are usually viewed as detrimental to the quantum yield as a result of two central processes. First, intrinsic electrons/holes can be trapped by relaxing to the localized surface defect state(s). Klimov 2000 ; Underwood et al. 2001 ; Sewall et al. 2008 ; Berthe et al. 2008 ; McGuire et al. 2010 The trapped electron or hole then recombines radiatively on longer timescales. Hässelbarth et al. 1993 ; Norris et al. 1994 The broad red-shifted peak observed in the PL spectrum of poorly passivated QDs is typically assigned to the emission of the traps. Chestnoy et al. 1986 ; Mooney et al. 2013a ; Mooney et al. 2013b Second, the nonradiative recombination channel, where the recombined electron-hole pair dissipates its energy through lattice vibrations, is often much faster compared to the intrinsic excitonic states of the NC. This process is commonly termed Shockley-Read-Hall (SRH) recombination in bulk semiconductors, negatively affecting the performance of solar cells. Read and Shockley 1950 ; Hall 1952 ; Pevere et al. 2018 Figure 1: (a) Wavefunction isosurface of the localized hole‑trap state arising from an unpassivated surface sulfur atom. Yellow and blue indicate the positive and negative phases of the wavefunction, respectively. Cadmium (Cd), sulfur (S), and selenium (Se) atoms are rendered in magenta, yellow, and green. (b) Single‑particle energy levels of quasi‑electron (orange) and quasi‑hole (green) states from semiempirical pseudopotential calculations. The hole‑trap level is marked by a dashed line, and the trap depth is defined as \Delta\varepsilon_{\rm ht} . (c) Interacting electron (top) and hole (bottom) densities for a localized defect state (red box) and the lowest bright excitonic state (blue box) from the Bethe–Salpeter equation (BSE) calculation. Note that the electron density shifted slightly towards the hole trap density in the defect state. (d) Energy levels of the interacting intrinsic excitonic (blue) and defect states (red) from shallow ( - 0.2 eV) to deep (0.4 eV) single-particle hole trap depth \Delta\varepsilon_{\rm ht} . Defect levels shift downward with increasing \Delta\varepsilon_{\rm ht} . In the interacting electron-hole pair or excitonic framework, both intrinsic excitonic states (states without trapped electron or hole states) and defect excitonic states can be treated on the same footing. The intrinsic excitons relax via defect excitons by emitting one or more phonons before ultimately recombining back to the ground state (either radiatively or nonradiatively). Both experimental and theoretical studies have shown that the passivation ligands significantly alter the electronic properties and reorganization energy of defect states. Jones et al. 2009 ; Mooney et al. 2013b ; Liu et al. 2015 ; Houtepen et al. 2017 ; Alexander et al. 2024 However, it remains challenging to describe how changes in these defect properties translate to the relaxation dynamics of excitons. This is because such a correlation necessitates modeling the process at an atomistic level, where the intricate interactions between the ligands, the surface, and the defect states must be accurately captured to understand their impact on excitonic behavior. In this paper, we explore the exciton dynamics in the presence of surface defects in CdSe/CdS core/shell colloidal QDs. An atomistic model was developed to include the interacting electrons and trapped holes (or defect exciton), as well as the coupling to the lattice vibrations of the QD. We focus on two dynamical processes, exciton trapping and defect-assisted nonradiative recombination. We demonstrate how the depth of hole traps and the reorganization energy of defect excitons influence the relaxation dynamics of excitons and the resulting quantum yield, in an unexpected way. By systematically analyzing the exciton relaxation pathways, we identify distinct regimes of defect-induced phenomena. Our findings provide valuable insights into the underlying mechanisms that govern defect-related behavior in NC QDs, offering guidance for the design of defect-tolerant materials and devices. To investigate the exciton relaxation and trapping processes, it is essential to explicitly incorporate the energies and nuclear couplings of both the excitonic and defect states into the model. Prezhdo 2009 ; Jasrasaria et al. 2022 Our previous research has focused on developing pseudopotentials Bergstresser and Cohen 1967 ; Wang and Zunger 1995 ; Fu and Zunger 1997a (PPs) for intrinsic excitons that accurately capture electron and hole energies and their coupling to the lattice. This approach allowed us to theoretically describe a wide range of carrier dynamics, including hot exciton cooling, photoluminescence spectra, and electron relaxation and transfer. Jasrasaria et al. 2022 ; Jasrasaria and Rabani 2021 ; Jasrasaria and Rabani 2023 ; Lin et

Read the complete text