Ultracompact 4H-silicon carbide optomechanical resonator with f m ⋅ Q m f_{m}\cdot Q_{m} exceeding 10 13 10^{13} Hz Journal: osajournal Publication type: article

yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,*, yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,* · 2025

Read Ultracompact 4H-silicon carbide optomechanical resonator with f m ⋅ Q m f_{m}\cdot Q_{m} exceeding 10 13 10^{13} Hz Journal: osajournal Publication type: article by yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,*, yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-07206.txt.

Introduction

Yuncong Liu and co-authors built a tiny device that links light and motion on a chip made from silicon carbide. The stuff has strong optical and physical traits, but it is hard to shape at small scale. Past devices made from it lost too much light or lacked a built-in way to read the motion.

Their device is a small disk, hung free so it can ring, on an insulated chip base. It loses very little light and rings at a high rate with strong quality. At low light power it kept a steady hum on its own, and at higher power it made clean higher tones. Such chips could serve in small sensors.

Catalog record

CREATORyuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,*, yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,*
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE30 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-07206

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ultracompact 4H-silicon carbide optomechanical resonator with f m ⋅ Q m f_{m}\cdot Q_{m} exceeding 10 13 10^{13} Hz Journal: osajournal Publication type: article yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,*, yuncong Liu \authormark 1, Wenhan Sun \authormark 2, Hamed Abiri \authormark 3, Philip X.-L. Feng \authormark 1,*, and Qing Li \authormark 2,* Abstract Silicon carbide (SiC) has great potential for optomechanical applications due to its outstanding optical and mechanical properties. However, challenges associated with SiC nanofabrication have constrained its adoption in optomechanical devices, as embodied by the considerable optical loss or lack of integrated optical access in existing mechanical resonators. In this work, we overcome such challenges and demonstrate a low-loss, ultracompact optomechanical resonator in an integrated 4H-SiC-on-insulator (4H-SiCOI) photonic platform for the first time. Based on a suspended 4.3 4.3 - μ \mu m-radius microdisk, the SiC optomechanical resonator features low optical loss ( < 1 <1 dB/cm), a high mechanical frequency f m f_{m} of 0.95 × 10 9 0.95\times 10^{9} Hz, a mechanical quality factor Q m Q_{m} of 1.92 × 10 4 1.92\times 10^{4} , and a footprint of < 1 × 10 − 5 <1\times 10^{-5} mm 2 . The corresponding f m ⋅ Q m f_{m}\cdot Q_{m} product is estimated to be 1.82 × 10 13 1.82\times 10^{13} Hz, which is among the highest reported values of optomechanical cavities tested in an ambient environment at room temperature. In addition, the strong optomechanical coupling in the SiC microdisk enables coherent regenerative optomechanical oscillations at a threshold optical dropped power of 14 μ \mu W, which also supports efficient harmonic generation at increased power levels. With such competitive performance, we envision a range of chip-scale optomechanical applications to be enabled by the low-loss 4H-SiCOI platform. 1 Introduction Advances in nanofabrication and photonic engineering have propelled cavity optomechanical systems to a pivotal role for probing fundamental optical force-mediated mechanical phenomena and enabling precision control over light-matter interactions [ 1 ] . These optomechanical systems have evolved rapidly with improved coupling efficiencies and tunable responses, promising innovations in vast fields including metrology [ 2 , 3 , 4 ] , quantum information [ 5 , 6 , 7 ] , and advanced sensing [ 8 , 9 ] . Despite the significant progress achieved with conventional materials such as silicon (Si) [ 10 , 11 , 12 , 13 ] , silicon dioxide (SiO 2 ) [ 14 , 15 , 16 ] , silicon nitride ( \text{Si}_{3}\text{N}_{4} ) [ 17 , 18 ] , the quest for better performance has driven attention toward other candidates such as aluminum nitride (AlN) [ 19 , 20 ] , diamond [ 21 , 22 ] , gallium phosphide (GaP) [ 23 , 24 ] , and lithium niobate (LN) [ 25 , 26 , 27 ] for their broadband optical transparency, strong optical confinement, and exceptional mechanical properties that enable high-frequency mechanical modes with minimal dissipation. Among them, silicon carbide (SiC) stands out due to its exceptional thermal stability, mechanical robustness, and compatibility with CMOS processing [ 28 , 29 , 30 , 31 ] . For example, the mechanical frequency and quality factor product ( f_{m}\cdot Q_{m} ) of SiC is predicted to be 6.4\times 10^{14} Hz in the Akhiezer regime, which is one order of magnitude higher than that of Si ( 3.9\times 10^{13} Hz) and diamond ( 3.7\times 10^{13} Hz) [ 32 , 33 , 34 ] . However, the very characteristics that make SiC attractive — its high mechanical rigidity and chemical inertness — also present fabrication challenges that constrain the realization of high-performance SiC optomechanical resonators. To date, only a few experiments have successfully demonstrated optomechanical resonators in the polytype of 3C-SiC [ 35 ] . In 4H-SiC, the reported SiC mechanical resonators are all bulky and only support mechanical modes with relatively low frequencies ( <10 MHz) [ 30 , 31 ] . In addition, the lack of integrated optical access necessitates additional excitation mechanisms, further complicating device design and scaling potential. Figure 1: (a) Schematic of the silicon carbide (SiC) cavity optomechanical system and its operating principle. (b) Scanning electron micrograph of a 4.5 - \mu m-radius microdisk with on-chip waveguide access. The 4H-SiC microdisk has a device thickness of 600 nm, sitting on a 2- \mu m-thick silicon dioxide pedestal with an approximate undercut width of 3.4\ \mu m. (c) Simulated mechanical frequency of the fundamental radial breathing mode (RBM) as a function of the radius. The inset displays the corresponding mechanical displacement profile based on finite element simulation:Young’s modulus E_{\text{Y}} = 535 GPa, Poisson’s ratio \nu=0.183 , and mass density \rho= 3210 \text{kg/m}^{3} ). In this work, we report the first demonstration of a high-performance, integrated 4H-SiC optomechanical resonator that simultaneously functions as a high-finesse optical cavity. As illustrated in Fig. 1 , our design employs an ultracompact (radius around 4 \mu m) microdisk resonator suspended on a low-loss 4H-SiC-on-insulator (4H-SiCOI) platform, which supports whispering gallery modes in telecom wavelengths with intrinsic optical quality factors up to \sim 1\times 10^{6} . The strong optomechanical coupling resulting from highly co-localized optical and mechanical modes enables sensitive readout of the Brownian motion through optical photodetection, achieving a displacement sensitivity of 0.144 \text{fm}/\sqrt{\text{Hz}} . With this method, we characterize the fundamental mechanical mode to exhibit a mechanical frequency ( f_{m} ) of 950 MHz and a mechanical quality factor ( Q_{m} ) near 19,200 . The corresponding mechanical frequency and quality factor product ( f_{m}\cdot Q_{m} ) is estimated to be 1.82\times 10^{13} Hz, which is among the highest reported metrics of optomechanical cavities tested in an ambient environment at room temperature. Finally, we also achieve radiation pressure-driven regenerative (or self-sustained) optomechanical oscillations and harmonic generation with an on-chip optical power well below 1 mW. 2 Device design and fabrication An optomechanical resonator requires strong coupling between the optical and mechanical modes. As illustrated in Fig. 1 , the optical whispering-gallery mode supported by the SiC microdisk generates radiation pressure along the radial direction, efficiently driving the fundamental mechanical radial-breathing mode with dominant radial displacement (see Fig. 1 a). For such mechanical modes, numerical simulations based on the finite element method (FEM) point to a mechanical frequency above the very-high-frequency (VHF) band (i.e., >300 MHz) for SiC microdisks with radii below 13\ \mu m (see Fig. 1 c). In addition, the optomechanical coupling coefficient resulting from the moving-boundary effect scales as g_{\text{om}}\approx\omega_{\text{o}}/R , where \omega_{\text{o}} is the angular optical resonance frequency and R is the radius. While a small R benefits a high mechanical frequency and strong optomechanical coupling, the optical quality factor of the SiC microdisk could drop significantly if the radius is close to the optical wavelength ( 1.55\ \mu m in this experiment). As such, we choose to work with disks with radii near 4\ \mu m to balance the mechanical and optical properties. A detailed simulation shows that a 4- \mu m-radius SiC disk exhibits a mechanical frequency f_{m}\approx 1 GHz, an effective mass of m_{\text{eff}}\approx 71 pg, and g_{\text{om}}/2\pi\approx 44 GHz/nm for the fundamental transverse-electric (TE 00 ) mode. These numbers translate to a

Read the complete text