Buckling of residually stressed cylindrical tubes under compression
Tao Zhang, Luis Dorfmann, Yang Liu · 2025
Read Buckling of residually stressed cylindrical tubes under compression by Tao Zhang, Luis Dorfmann, Yang Liu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-07109.txt.
Introduction
Tao Zhang and co-authors wrote a 2025 mechanics paper on buckling of tubes that carry residual stress. Residual stress is locked-in strain left by making or treating a tube. When a tube is squeezed along its length, it can buckle in different modes. Stress left inside shifts which mode appears.
Using nonlinear elasticity and an incremental method, they derive an exact buckling condition. Both round and lopsided buckling modes are covered. For long thin tubes, classic Euler buckling rules and stress effects fade. For short thick tubes, a barreling mode rules, and residual stress can erase it. Mode switches are charted as tube slenderness varies.
Catalog record
| CREATOR | Tao Zhang, Luis Dorfmann, Yang Liu |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 52 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-07109
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Buckling of residually stressed cylindrical tubes under compression Tao Zhang, Luis Dorfmann, Yang Liu Abstract We evaluate the loss of stability of axially compressed slender and thick-walled tubes subject to a residual stress distribution. The nonlinear theory of elasticity, when used to analyze the underlying deformation, shows that the residual stress induces preferred directions in the reference configuration. The incremental theory, given in Stroh form, is used to derive an exact bifurcation condition. The critical stretch and the associated critical buckling mode are identified for axisymmetric and asymmetric increments in the deformation. Mode transitions are illustrated as the tube slenderness varies. For slender tubes, Euler buckling is energetically favorable, and the effect of residual stress is negligible. However, for short and thick-walled tubes where barreling mode is dominant, the residual stress significantly affects the buckling behavior and may eliminate barreling instability. We show that, depending on its magnitude and direction, residual stress can either accelerate or delay instability. Phase diagrams for various modes are obtained and provide insight into pattern selection across different tube geometries. 1 Introduction Tubular structures are frequently encountered in both biology and engineering applications—for example, blood vessels ( Fung, 1993 ; Sokolis, 2015 ) , microtubules in cells ( Brangwynne et al., 2006 ; Li, 2008 ) , packers used in petroleum engineering ( Liu, 2018 ; Lan et al., 2019 ) , and cellular foams ( Chawla et al., 2022 ) , among others. In practice, these structures may undergo finite deformations, making them susceptible to buckling under combined axial and transverse loads. In a seminal study, Koiter (1945) developed a post-buckling theory and demonstrated that imperfection sensitivity can cause an axially compressed cylindrical shell to collapse earlier than theoretical prediction. Since then, the stability and bifurcation behavior of cylindrical tubes or shells under various load conditions have been a topic of fundamental interest in both the mechanics and engineering communities. For thick and incompressible neo-Hookean tubes subjected to end loads, Wilkes (1955) employed finite deformation theory to investigate buckling instability. An important finding was that the associated eigenvalue problem arising from a linear bifurcation analysis in cylindrical polar coordinates can be solved exactly in terms of Bessel functions. Decades later, this classical problem was revisited by Pan and Beatty (1997a) ; Pan and Beatty (1997b) ; Pan and Beatty (1999) and results for different material models were provided. Considering material compressibility, Dorfmann and Haughton (2006) explored the full bifurcation landscape for tubes under axial compression and unveiled two distinct forms of the barreling mode. Goriely et al. (2008) re-derived the exact bifurcation condition for incompressible tubes of arbitrary wall thickness and length under compression using the Stroh formalism. They also obtained useful asymptotic solutions and constructed a phase diagram characterizing different bifurcation modes. Springhetti et al. (2023) re-established the classical conditions for thin-walled cylinders and proposed a generalized framework applicable to a broad class of nonlinear hyperelastic materials. These studies focused on using the nonlinear theory to determine the critical buckling loads and corresponding mode shapes. However, they do not provide insight into the post-buckling evolution or the nature of the bifurcation. To address this gap, Dai et al. (2015) adopted a coupled series–asymptotic expansion to derive a reduced model applicable for thin-walled tubes. Focusing on asymmetric bifurcation modes, they obtained analytical post-buckling solutions and revealed the counterintuitive result that a thick-walled tube may be softer than a thin one. Recently, Zhou et al. (2023) performed a post-buckling analysis of axially compressed thick-walled tubes in a fully three-dimensional setting to highlight the influence of geometric parameters on both buckling and post-buckling behaviors. In many practical applications, tubular structures are subjected to complex loading conditions. To advance the understanding of tube stability under such conditions, Haughton and Ogden (1979a) ; Haughton and Ogden (1979b) developed an analysis for both thin- and thick-walled tubes subjected to axial force and internal pressure. They examined prismatic, axisymmetric, and asymmetric buckling modes, and showed how geometric parameters, such as wall thickness, length-to-radius ratio, and axial stretch influence the onset of instability. Zhu et al. (2008) provided a comprehensive bifurcation analysis of thick-walled tubes under combined axial load and external pressure, capturing a rich spectrum of asymmetric and axisymmetric modes across a wide range of wall thicknesses. Chen et al. (2017) used the incremental theory to investigate instabilities of functionally graded tubes under combined axial stretch and internal or external pressures. Their parametric study highlights how graded material properties and loading conditions affect bifurcation behavior, enabling the design of soft cylindrical structures with tailored mechanical responses. Liu (2018) explored buckling of hyperelastic tubes under constrained compression and identified transition between axial and circumferential instabilities. In addition to stress generated by external loads, a residual stress may develop in biological tissue due to growth and remodeling and in synthetic materials due to discontinuities between different components and the fabrication process. These additional stresses are in equilibrium with zero surface traction and persist even after external loads are removed. A well-known example is arterial tissue, which exhibits axial, circumferential, and radial residual stress components ( Vaishnav and Vossoughi, 1987 ; Holzapfel and Ogden, 2010 ) . It turns out that residual stress in arteries serves to homogenize stress distributions induced by blood pressure ( Liu and Fung, 1989 ; Fung, 1991 ; Fung, 1993 ) . Studies including the effect of residual stress in cardiac tissue have been carried in Omens and Fung (1990) ; Costa et al. (1997) ; Rausch and Kuhl (2013) It is well known that the mechanical properties of residually stressed biological tissue are deformation dependent. To capture this behavior, Hoger (1985) ; Hoger (1993) ; Hoger (1996) ; Hoger (1997) developed a nonlinear elasticity theory to account for finite deformation and residual stress. Using Hoger’s work as starting point, Merodio et al. (2013) analyzed the influence of residual stress on the finite deformation of hyperelastic materials, focusing on problems such as simple shear, tube inflation, and tension–torsion of cylinders. Ahamed et al. (2016) investigated how residual stress affects wall stress distribution in abdominal aortic aneurysms (AAAs), using patient-specific data and modeling the material as fiber-reinforced. Dorfmann and Ogden (2021) studied the impact of residual stress on the stability of pressurized tubes under axial extension, focusing on axisymmetric modes. Melnikov et al. (2021) conducted a detailed bifurcation analysis of residually stressed tubes subjected to combined extension and inflation, considering both axisymmetric and asymmetric responses. More recently, Liu and Dorfmann (2024) demonstrated that residual stress can trigger localized instabilities in a stretched cylinder and derived an analytical bifurcation condition for localization. Furthermore, both localized bulging and necking may occur, depending on the loading strategy ( Liu and Dorfmann, 2024 ; Liu et al., 2024 ) . The focus of this work is provide a comprehensive investigation of the bifurcation behavior of tubes under axial compression, with particular attention to both axial and circumferential instability modes. We specialize the incremental equations and boundary conditions in Stroh form to derive an exact bifurcation condition and to investigate how residual stress influences the onset of buckling. The rest of this paper is organized as follows. Section 2 summarizes the fundamental theory for residually stressed solids. Section 3 outlines the incremental theory used