Estimating critical disorder strength of an AAH system via thermal response
Sanchita Nandi, Santanu K. Maiti · 2025
Read Estimating critical disorder strength of an AAH system via thermal response by Sanchita Nandi, Santanu K. Maiti (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-07059.txt.
Introduction
Sanchita Nandi and Santanu Maiti proposed heat as a probe of a localization shift in a 2025 paper. The Aubry-Andre-Harper model is a clean test bed where a wavy pattern traps electrons as its depth grows. Past a sharp depth, equal to twice the hop strength, electrons stop roaming and the material turns insulator-like.
Past probes read that shift through charge or wave traits. Nandi and Maiti show that the electronic specific heat carries its own clear mark of the crossing. The mark tracks how the state density warps as disorder grows. A heat read is a bench-friendly test that many labs can run.
Catalog record
| CREATOR | Sanchita Nandi, Santanu K. Maiti |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 15 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-07059
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Estimating critical disorder strength of an AAH system via thermal response Sanchita Nandi, Santanu K. Maiti Abstract The Aubry-André-Harper (AAH) model provides a paradigmatic platform to study localization phenomena, where a transition from a conducting to an insulating phase occurs at a critical disorder strength equal to twice the nearest-neighbor hopping amplitude, 2 t 2t . While this transition has been explored extensively through various probes, here we propose a fundamentally new approach based on thermal response. Specifically, we demonstrate that the electronic specific heat exhibits a distinctive signature across the transition, directly reflecting the anomalous evolution of the density of states with disorder strength. Our findings, supported by numerical analysis, establish specific heat measurement as a powerful and sensitive probe for detecting the critical point. This thermal characterization opens a new avenue for exploring disorder-induced phase transitions and paves the way for experimental realization in engineered quantum systems. Disorder-induced quantum phase transitions in low-dimensional systems have remained a central topic in condensed matter physics since the seminal work of Anderson on localization lc1 . In low-dimensional lattices with random disorder, any finite amount of disorder is sufficient to localize all electronic states lc1 ; lc2 ; lc3 ; lc4 ; lc5 ; lc6 , thereby driving a phase transition from a conducting to an insulating state. This implies that the critical disorder strength is effectively zero in such systems lc1 ; lc2 ; lc3 ; lc4 ; lc5 ; lc6 , highlighting the extreme sensitivity of low-dimensional transport to randomness. A particularly intriguing departure from this behavior occurs where disorder is introduced in a quasiperiodic qc1 ; qc2 ; qc3 rather than a random manner. The Aubry-André-Harper (AAH) model serves as a canonical example in this class abr1 ; abr2 ; abr3 ; abr4 . In this model, the on-site potentials are modulated quasiperiodically, typically as \epsilon_{n}=W\cos(2\pi\beta n+\phi) , where W is the modulation strength, \beta is an irrational number, and \phi is the phase factor. Remarkably, unlike random disorder, this system exhibits a sharp localization-delocalization transition at a finite critical modulation strength W_{c}=2t , where t is the nearest-neighbor hopping amplitude abr2 ; abr3 ; abr4 . For W<2t , all eigenstates are extended, while for W>2t , all states are localized, making it an ideal platform for studying deterministic disorder-induced transitions in one dimension. This transition has been extensively investigated using a wide range of theoretical diagnostics. These include the inverse participation ratio (IPR) abr5 ; ipr1 ; ipr2 ; ipr3 , which quantifies the spatial localization of eigenstates, as well as statistical measures such as level spacing distributions. Transport-based quantities like conductance and Lyapunov exponents lp1 ; lp2 , and dynamical measures dyn1 such as wavepacket spreading and entanglement entropy enp1 ; enp2 ; enp3 have also been used to detect and characterize the transition. Despite their effectiveness in revealing the localization physics, these probes are fundamentally tied to eigenvalues and eigenstates, and are often inaccessible in direct experimental measurements. Experimentally, the detection of the AAH transition has primarily been confined to synthetic systems, such as ultracold atoms in optical lattices oplt1 ; oplt2 and photonic crystals phl1 ; phl2 ; phl3 , where the requisite quasiperiodic potential landscapes can be engineered with high precision. These platforms have enabled remarkable demonstrations of localization transitions analogous to those predicted by the AAH model. More recently, there have been exploratory studies involving mechanical metamaterials and nano-electromechanical resonator arrays meta ; meca , expanding the experimental reach of AAH-type physics. However, despite these advances, the realization and detection of the AAH transition in purely electronic 1D systems remains severely limited. The quantum Hall system qh1 ; qh2 ; qh3 , involving 2D electron gases under strong magnetic fields, stands as one of the rare examples where AAH-like behavior emerges in electronic settings. Yet this system is fundamentally two-dimensional and magnetic-field-dependent, differing in essential ways from the 1D AAH scenario. In light of this gap, the present Letter proposes a new and experimentally feasible route to detect Figure 1: (Color online). Schematic of a 1D AAH chain with N lattice sites. Different colored balls are used to represent the variation in site energies across the lattice. the AAH transition in one-dimensional electronic systems. Specifically, we report, for the first time, that the transition can be probed through the measurement of the electronic specific heat (ESH), a well-established quantity sh1 ; sh2 ; sh3 ; sh4 that is routinely measured in laboratory settings spexp1 ; spexp2 ; spexp3 . Using extensive numerical calculations, we demonstrate that the ESH exhibits a distinct and robust signature across the AAH transition point. This response is directly linked to the anomalous restructuring of the electronic density of states (DOS) as the modulation strength W crosses the critical value. The strength of our approach lies in its direct experimental relevance, in contrast to existing theoretical probes that rely on spectral or state-level diagnostics. Moreover, the method is general and versatile, holding across a broad range of physically relevant parameters, and does not require any exotic experimental apparatus. Our findings thus open a promising direction for the experimental realization of quasiperiodic localization phenomena in low-dimensional electronic systems, potentially enabling new classes of material diagnostics based on thermal measurements. We consider a one-dimensional tight-binding chain with site energies modulated according to the AAH model. A schematic representation of the system is shown in Fig. 1 . The Hamiltonian of the system is given by abr4 ; abr5 ; phl1 H=\sum_{n}\left[\epsilon_{n}c_{n}^{\dagger}c_{n}+t\left(c_{n}^{\dagger}c_{n+1}+c_{n+1}^{\dagger}c_{n}\right)\right], (1) where c_{n}^{\dagger} and c_{n} are the fermionic creation and annihilation operators at site n , respectively, and t is the nearest-neighbor hopping amplitude. The on-site energies \epsilon_{n} are modulated as abr4 ; abr5 ; phl1 \epsilon_{n}=W\cos(2\pi bn), (2) with W being the modulation strength. We choose b=(1+\sqrt{5})/2 , the golden mean, as a representative irrational number commonly used in the literature abr4 ; abr5 ; phl1 , although the physical behavior remains qualitatively similar for other incommensurate choices. To probe the thermal response of the system, we focus on the electronic specific heat C_{v} , which is directly connected to the density of states. The density of states, \rho(E) , is calculated using the retarded Green’s function formalism gf1 \rho(E)=-\frac{1}{N\pi}\text{Im}\left[\text{Tr}\left(G(E)\right)\right], (3) where G(E) is the Green’s function defined as gf1 ; gf2 G(E)=\left(E-H+i\eta\right)^{-1}, (4) with \eta\rightarrow 0^{+} . The eigenenergies E_{i} are obtained via direct diagonalization of the Hamiltonian. The electronic specific heat C_{v} is derived from the temperature derivative of the system’s average energy \bar{U} sh1 ; sh2 ; sh3 ; sh4 C_{v}=\frac{d\bar{U}}{dT}, (5) where \bar{U}=\sum_{i=1}^{N}(E_{i}-\mu)f(E_{i}). (6) Here, E_{i} are the eigenenergies obtained via direct diagonalization of the Hamiltonian, \mu denotes the electrochemical potential, and f(E_{i}) is the Fermi-Dirac distribution function, given by f(E_{i})=\frac{1}{1+\exp\left[(E_{i}-\mu)/(k_{B}T)\right]}, (7) where k_{B} is the Boltzmann constant and T is the absolute temperature. This thermodynamic formulation allows us to capture the collective response of all accessible electronic states, thereby enabling a direct assessment of ESH encoded in the DOS. We now present and analyze our results. The central objective of this Letter is to determine the critical disorder strength W_{c} characterizing the AAH transition, from the measurement of electronic specific heat. Before delving into the results, we outline the parameter values