Dynamic feedback linearization of two-input control systems via successive one-fold prolongations

Florentina Nicolau, Witold Respondek, Shunjie Li · 2025

Read Dynamic feedback linearization of two-input control systems via successive one-fold prolongations by Florentina Nicolau, Witold Respondek, Shunjie Li (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-06677.txt.

Introduction

Florentina Nicolau, Witold Respondek, and Shunjie Li linearize two-input control systems by stretching one control at a time. Their paper from twenty twenty-five gives a constructive algorithm for dynamic feedback linearization. Static feedback demands involutive distribution flags. The dynamic route relaxes that: the first faulty distribution need only hold an involutive subdistribution one rank down.

At each step, the algorithm swaps that faulty distribution for its near-involutive part. The prolonged system then gains at least one fresh involutive level. A control must be chosen with care at each round to keep the ladder climbing. Sufficient conditions for flatness come with the method. The authors frame the scheme as the dual of a known dynamic linearization algorithm from the early two thousands.

Catalog record

CREATORFlorentina Nicolau, Witold Respondek, Shunjie Li
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE141 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-06677

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Dynamic feedback linearization of two-input control systems via successive one-fold prolongations Florentina Nicolau, Witold Respondek, Shunjie Li Abstract In this paper, we propose a constructive algorithm to dynamically linearize two-input control systems via successive one-fold prolongations of a control that has to be suitably chosen at each step of the algorithm. Linearization via successive one-fold prolongations requires special properties of the linearizability distributions 𝒟 0 ⊂ 𝒟 1 ⊂ 𝒟 2 ⊂ ⋯ \mathcal{D}^{0}\subset\mathcal{D}^{1}\subset\mathcal{D}^{2}\subset\cdots . Contrary to the case of static feedback linearizability , they need not be involutive but the first noninvolutive one has to contain an involutive subdistribution of corank one. The main idea of the proposed algorithm is to replace, at each step, the first noninvolutive distribution by its involutive subdistribution of corank one , thus for the prolonged system we gain at least one new involutive distribution. Our algorithm is constructive, gives sufficient conditions for flatness, and can be seen as the dual of the dynamic feedback linearization algorithm of Battilotti and Califano [ 2 , 7 ] . 1 Introduction In this paper, we study flatness of nonlinear control systems of the form \Xi\,:~\ \dot{x}=~F(x,u), where x is the state defined on a open subset X of \mathbb{R}^{n} and u is the control taking values in an open subset U of \mathbb{R}^{m} (more generally, an n -dimensional manifold X and an m -dimensional manifold U, resp.). The dynamics F are such that \mathrm{rk}\,\frac{\partial F}{\partial u}=m , and are supposed smooth (the word smooth will always mean \mathcal{C}^{\infty} -smooth). The notion of flatness was introduced in control theory in the 1990’s, by Fliess, Lévine, Martin and Rouchon [ 10 ] , see also [ 17 , 18 , 21 , 25 , 31 , 34 ] , and the references therein, and has attracted a lot of attention because of its multiple applications in the problem of constructive controllability and motion planning (for some recent applications, see [ 5 , 20 , 22 , 23 , 26 , 36 ] ). Flat systems form a class of control systems whose set of trajectories can be parametrized by m functions and their time-derivatives, m being the number of controls. More precisely, the system \Xi\,:\dot{x}=~F(x,u) is flat if we can find m functions, \varphi_{i}(x,u,\dots,u^{(l)}) such that x=\gamma(\varphi,\dots,\varphi^{(s-1)})\mbox{ and }u=\delta(\varphi,\dots,\varphi^{(s)}), (1) for certain integers l and s , where \varphi=(\varphi_{1},\dots,\varphi_{m}) is called a flat output . Therefore the time-evolution of all state and control variables can be determined from that of flat outputs without integration and all trajectories of the system can be completely parameterized. Flat systems can be seen as a generalization of static feedback linearizable systems. Namely, they are linearizable via dynamic, invertible and endogenous feedback, see [ 9 , 10 , 25 , 31 ] . The simplest flat systems that are not static feedback linearizable are control-affine systems that become static feedback linearizable after an invertible one-fold prolongation of a suitably chosen control (which is the simplest dynamic feedback). A complete geometric characterization of that class of systems has been proposed by the authors in [ 28 ] for the two-input case, and [ 29 ] for the multi-input case (see also [ 13 , 15 , 27 ] for related results on linearization via a two-fold prolongation). Inspired by those results, the goal of this paper is to propose a constructive algorithm to dynamically linearize two-input control systems via successive one-fold prolongations of a control that has to be suitably chosen at each step of the algorithm. Preliminary results, on which this paper is based, were presented in [ 30 ] . Linearization via successive one-fold prolongations requires special properties of the linearizability distributions \mathcal{D}^{0}\subset\mathcal{D}^{1}\subset\mathcal{D}^{2}\subset\cdots . Contrary to the case of static feedback linearization, they need not be involutive but the first noninvolutive one has to contain a sufficiently large (actually of corank one) involutive subdistribution. The main idea of the proposed algorithm is, at each new step, to prolong the system in such a way that the first noninvolutive distribution \mathcal{D}^{k} is replaced by its largest involutive subdistribution \mathcal{H}^{k} , thus for the prolonged system we gain at least one new involutive distribution. Working with the first noninvolutive distribution guarantees that all objects that we use are invariant with respect to feedback transformations. If the algorithm terminates with a system that is static feedback linearizable, then the starting system of the algorithm will be called “linearizable via successive one-fold prolongations with involutivity gain” (shortly, LSOPI). In the present paper, using necessary and sufficient conditions for \mathcal{H}^{k} to exist, we provide conditions for that step-by-step prolongation to dynamically linearize the system. The conditions are easy to check, their verification involves differentiation and algebraic operations only, without solving PDE’s or bringing the system into a normal form. If such an involutive subdistribution exists, we uniquely identify it in almost all cases and provide an explicit construction (except for one particular subcase, where the algorithm may not be conclusive). Such an involutive subdistribution has to be calculated at each step of the algorithm and plays a crucial role for linearization via successive one-fold prolongations with involutivity gain. Indeed, it will take the place of the first noninvolutive distribution and, moreover, it enables us to define a to-be-prolonged control. Our solution is related to important results of Battilotti and Califano [ 2 , 7 ] (see also [ 3 , 4 ] for the multi-input case), where a constructive condition for dynamic feedback linearization of two-input nonlinear systems, also based on prolongations, is presented. The algorithm that we propose can be seen as the dual of the results of [ 2 , 7 ] whose authors identify the inputs that should not be extended through prolongations with the help of the last noninvolutive linearizability distribution while here, we work with the first noninvolutive distribution and we identify the inputs that have to be prolonged . A t each step of our algorithm, general static feedback transformations are allowed (involving the original states and the controls prolonged at the previous steps). I n [ 2 ] , the class of allowed dynamic feedback laws is restricted to prolongations of the original inputs plus a final static feedback on the extended system, but in [ 7 ] , the framework is extended to general feedback transformations and two static state feedback actions (called the direction feedback and the reduction feedback) may also be applied at each step of the algorithm. In this paper, we work under constant rank assumptions, which simplifies certain aspects of the analysis. In [ 3 ] , the authors also investigate the more general situation where the linearizability distributions may lose constant rank. Other results related to dynamic feedback linearizability via prolongations can be found, for instance, in [ 11 , 12 , 24 ] (see also the references therein); in the aforementioned papers only original controls are prolonged, so the problem reduces to the classical static feedback linearization, namely, to checking involutivity of some distributions. Some systems, although dynamically linearizable via successive one-fold prolongations (referred to as LSOP-systems), may however, not satisfy the LSOPI conditions. In other words, we may gain no involutive distribution or the involutivity of some distributions may even be destroyed

Read the complete text