Representation of tensor functions using low-order structural tensor set: two-dimensional point groups

Mohammad Madadi, Lin Cheng, Pu Zhang · 2025

Read Representation of tensor functions using low-order structural tensor set: two-dimensional point groups by Mohammad Madadi, Lin Cheng, Pu Zhang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-06156.txt.

Introduction

Mohammad Madadi, Lin Cheng, and Pu Zhang complete a theory for describing material response in a 2025 paper. Engineers model how anisotropic materials bend and conduct with tensor functions shaped by symmetry. Classic theory needs high-order symmetry tensors for many patterns, which blocks practical use. A newer reformulation promises low-order tensors only, but it lacked full proof for flat patterns.

The authors settle the theory for all two-dimensional point groups. Each group gets a small set of low-order structural tensors, and the general response functions follow. Readers who model composites, nanomaterials, and soft tissues get formulas they can actually apply.

Catalog record

CREATORMohammad Madadi, Lin Cheng, Pu Zhang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE76 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-06156

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Representation of tensor functions using low-order structural tensor set: two-dimensional point groups Mohammad Madadi, Lin Cheng, Pu Zhang Abstract The representation theory of tensor functions is essential to constitutive modeling of materials including both mechanical and physical behaviors. Generally, material symmetry is incorporated in the tensor functions through a structural or anisotropic tensor that characterizes the corresponding point group. The general mathematical framework was well-established in the 1990s. Nevertheless, the traditional theory suffers from a grand challenge that many point groups involve fourth or sixth order structural tensors that hinder its practical applications in engineering. Recently, researchers have reformulated the representation theory and opened up opportunities to model anisotropic materials using low-order (i.e., 2nd- order and lower) structural tensors only, although the theory was not fully established. This work aims to fully establish the reformulated representation theory of tensor functions for all two-dimensional point groups. It was found that each point group needs a structural tensor set to characterize the symmetry. For each two-dimensional point group, the structural tensor set is proposed and the general tensor functions are derived. Only low-order structural tensors are introduced so researchers can readily apply these tensor functions for their modeling applications. The theory presented here is useful for constitutive modeling of materials in general, especially for composites, nanomaterials, soft tissues, etc. 1 Introduction Constitutive modeling of materials [ 1 ] plays a crucial role in continuum mechanics and materials science. Contemporary constitutive modeling encompasses not only mechanical behaviors (e.g., stress-strain relations, yield surface, and failure criterion) but also physical properties (e.g., conductivity, dielectric, etc.) and mechano-physical behaviors (i.e., strain-dependent physical properties). These mechanical behaviors or physical properties are usually described by scalar- or tensor-valued functions with multiple arguments including field and state variables. Generally, most materials are anisotropic and they fall into one of the 12 two-dimensional (2D) and 39 three-dimensional (3D) point groups [ 2 ] , if both crystallographic and continuous groups are counted. The representation theory of tensor functions offers general forms of constitutive models that satisfy both frame-indifference and material symmetry principles. It is among the most significant theories in continuum mechanics and lays the foundation for constitutive modeling. The establishment of this theory dated back to the mid-20th century. Researchers like Rivlin (1948) [ 3 ] , Rivlin and Ericksen (1955) [ 4 ] , Rivlin (1955) [ 5 ] , Pipkin and Rivlin (1959) [ 6 ] , and Noll (1970) [ 7 ] introduced complete and irreducible polynomial representations of isotropic tensor functions. Moreover, Wang [ 8 , 9 , 10 , 11 ] , Smith [ 12 , 13 ] , and Boehler [ 14 ] derived the first general relations for isotropic scalar-, vector-, 2nd-order symmetric, and antisymmetric tensor-valued functions of any finite number of 2nd-order symmetric and skew-symmetric tensors, and vectors in 3D space. Afterwards, the late 20th century witnessed further development on the representation theory of anisotropic tensor functions. Specifically, Boehler, Spencer, Liu and Betten [ 15 , 16 , 17 , 18 , 19 , 20 ] developed a method of isotropic extension by introducing structural tensors (a.k.a., anisotropic tensors). The structural tensors characterize material symmetry and are invariant under any symmetry operation in the corresponding point group. This approach converts an anisotropic tensor function into an extended isotropic tensor function by including additional structural tensor arguments. The structural tensors of all 2D and 3D point groups can be found in works of Zheng and Xiao [ 21 , 22 , 2 , 23 ] . Researchers can refer to a comprehensive review paper by Zheng [ 2 ] for more details. Although this representation theory of anisotropic tensor functions is elegant, its practical application is somehow limited and the development is stalled. On the one hand, it does not provide specific functions for constitutive models, but rather the general mathematical formulation. One has to figure out the specific functions either empirically or from a trial-and-error process. On the other hand, a grand challenge is that most point groups exhibit higher-order structural tensors (i.e., 3^{rd} order and higher) that impede practical modeling usage [ 2 ] . For example, a 6^{th} order structural tensor was defined for the group \mathcal{C}_{6v} and it is very hard to devise specific tensor functions including this term. Generally, constitutive modeling with structural tensors of order higher than two is complicated and impractical. Among all the material symmetries, besides orthotropic and transversely isotropic, only point groups in triclinic, monoclinic, and rhombic crystal systems can be characterized with lower-order structural tensors (i.e., 2^{nd} order and lower). For other point groups, very little constitutive modeling work has been done yet. In order to circumvent higher-order structural tensors, Man and Goddard [ 24 ] reformulated the representation theory of tensor functions in 2018, which sheds some light to develop constitutive models for practical usage. In the original formulation developed by Boehler and Liu [ 16 , 19 ] , the structural tensors must be invariant under any symmetry operation in the point group. In contrast, the reformulation by Man and Goddard [ 24 ] relaxed this strict requirement for structural tensors but added additional symmetry constraints on the tensor functions afterwards. Man and Goddard’s work opened a new era in the representation of anisotropic tensor functions, allowing constitutive modeling for all point groups with lower-order structural tensors only. In their paper, Man and Goddard provided a couple of examples to introduce how to use the reformulation. There is still a large knowledge gap on the reformulated representation theory and its applications in all 2D and 3D point groups. This work aims to address this need, establish the reformulated representation theory for all 2D point groups, and partially fill this knowledge gap. In the following sections, we first revisit the representation theory of tensor functions in Section 2 to prepare readers for the background theory. In Section 3 , we introduce a concept ”structural tensor set” that is the key to this reformulated representation and present the structural tensor sets for all 2D point groups. Note that six 2D point groups ( \mathcal{C}_{1} , \mathcal{C}_{1v} , \mathcal{C}_{2} , \mathcal{C}_{2v} , \mathcal{C}_{\infty} , \mathcal{C}_{\infty v} ) have lower-order structural tensors so their representation theory can adopt the original formulation of Boehler and Liu, as listed in Section 2 . In contrast, for the six 2D point groups ( \mathcal{C}_{4} , \mathcal{C}_{4v} , \mathcal{C}_{3} , \mathcal{C}_{3v} , \mathcal{C}_{6} , \mathcal{C}_{6v} ) with higher-order structural tensors, the reformulation of Man and Goddard has to be employed to establish the representation theory. Hence, we present the reformulated representation theory for these six 2D point groups in Sections 4 - 6 . It is worth mentioning that this paper uses the Schoenflies notation. For more details on the various notation systems, readers are encouraged to check the SI and consult [ 25 ] . Finally, we add more discussions and remarks in Section 7 regarding the reformulated representation theory and its applications. Additionally, it is worth noting that we have listed the symmetry operations and multiplication tables for all 2D point groups in the Supplementary Information. To our knowledge, these multiplication tables have not been published elsewhere yet. The Supplementary Information is not only useful for

Read the complete text