Automated Knot Detection and Pairing for Wood Analysis in the Timber Industry
Guohao Lin 1 , Shidong Pan 2 , Rasul Khanbayov 1 , Changxi Yang 1 , Ani Khaloian-Sarnaghi 1 , Andriy Kovryga 3 · 2025
Read Automated Knot Detection and Pairing for Wood Analysis in the Timber Industry by Guohao Lin 1 , Shidong Pan 2 , Rasul Khanbayov 1 , Changxi Yang 1 , Ani Khaloian-Sarnaghi 1 , Andriy Kovryga 3 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-05845.txt.
Introduction
Guohao Lin and co-authors build a hands-free pipe to find and pair knots in timber boards. Knots rule both looks and strength of wood, so mills must map each one. Hand marks eat hours. Their 2025 pipe starts with sharp board shots from shop cameras, hand-tagged to teach a spot net. The tuned net finds knots with high marks on a standard score.
Found knots are then paired face to face, since one knot can show on two board sides. Traits of each knot feed a twin net that maps them to a space where kin knots clump. Pair calls land right in most cases. End-point gaps to the board base and length spots drive the calls. The pipe can speed grading in mills.
Catalog record
| CREATOR | Guohao Lin 1 , Shidong Pan 2 , Rasul Khanbayov 1 , Changxi Yang 1 , Ani Khaloian-Sarnaghi 1 , Andriy Kovryga 3 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-05845
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Automated Knot Detection and Pairing for Wood Analysis in the Timber Industry Guohao Lin 1 , Shidong Pan 2 , Rasul Khanbayov 1 , Changxi Yang 1 , Ani Khaloian-Sarnaghi 1 , Andriy Kovryga 3 Abstract Knots in wood are critical to both aesthetics and structural integrity, making their detection and pairing essential in timber processing. However, traditional manual annotation was labor-intensive and inefficient, necessitating automation. This paper proposes a lightweight and fully automated pipeline for knot detection and pairing based on machine learning techniques. In the detection stage, high-resolution surface images of wooden boards were collected using industrial-grade cameras, and a large-scale dataset was manually annotated and preprocessed. After the transfer learning, the YOLOv8l achieves an [email protected] of 0.887. In the pairing stage, detected knots were analyzed and paired based on multidimensional feature extraction. A triplet neural network was used to map the features into a latent space, enabling clustering algorithms to identify and pair corresponding knots. The triplet network with learnable weights achieved a pairing accuracy of 0.85. Further analysis revealed that he distances from the knot’s start and end points to the bottom of the wooden board, and the longitudinal coordinates play crucial roles in achieving high pairing accuracy. Our experiments validate the effectiveness of the proposed solution, demonstrating the potential of AI in advancing wood science and industry. I Introduction Knots, as natural defects in wood, play a crucial role in determining timber’s structural integrity, mechanical performance, and overall quality. Their presence reduces wood’s usability, strength, and durability, while also introducing challenges such as aesthetic inconsistency and susceptibility to damage [ 1 , 2 , 3 , 4 , 5 , 6 ] . Knots differ significantly from the surrounding wood tissue in terms of density and water content, which can result in structural weaknesses, such as holes forming during the drying process [ 7 ] . It has been reported that knots can account for up to 70% of downgrading among all wood defects [ 8 ] . Accurately identifying and analyzing knots is therefore essential for optimizing cutting plans, improving aesthetics, and ensuring timber strength. In addition, the knot pairing task is significant in the wood industry as it helps assess the structural integrity and aesthetic quality of lumber. By identifying and analyzing pairs of knots, manufacturers can predict weak points in the wood, optimize cutting strategies, and improve material selection for different applications. Traditionally, knot detection and pairing have been performed through manual inspection or advanced imaging technologies, such as X-ray scanning [ 9 , 10 , 11 , 12 , 13 ] . While effective, these methods are often time-consuming, labor-intensive, and reliant on costly equipment, making them impractical for large-scale industrial applications. To address these limitations, this study proposes a lightweight and fully automated pipeline for knot detection and pairing that leverages machine learning techniques based on neural networks. The proposed approach consists of two primary stages: knot detection and knot pairing. In the detection stage, we collected high-resolution surface images of wooden boards using industrial-grade cameras. A large-scale dataset was manually annotated and fine-grained preprocessing was applied to ensure data quality. The dataset was then used to train three YOLOv8 variants via transfer learning [ 14 , 15 , 16 ] . Among these models, YOLOv8l achieved an [email protected] of 0.887, while the lightweight YOLOv8n achieved 0.846 [email protected], with only 1/20 of the model size and 1/8 of the training time. Following detection, the pairing stage analyzes the detected knots and pairs them based on extracted multidimensional knot features. These features, which are easily derived from continuous images, are preprocessed through normalization and cleaning to ensure consistency [ 17 ] . A triplet neural network [ 18 ] is then employed to map the features into a latent space, where clustering algorithms [ 19 , 20 ] identify and pair corresponding knots. This step also enables an exploration of how different knot characteristics influence the pairing process, providing insights for wood science. The triplet network with learnable weights achieved a pairing accuracy of 0.85. Further analysis reveals that the features k1 (the distances from the knot’s start point to the bottom of the wooden board), k2 (the distances from the knot’s end point to the bottom of the wooden board), and longitudinal coordinates play crucial roles in achieving high pairing accuracy. By combining computer vision-based detection with feature-driven pairing methodologies, this work introduces a scalable and efficient solution for automating knot analysis in timber processing. The results demonstrate the feasibility of replacing manual inspections with a robust pipeline, which can significantly enhance the speed and accuracy of knot detection and pairing. This study also demonstrates the feasibility of applying AI techniques to wood science and industry, exhibiting its interdisciplinary impact. II Background and Related Work II-A Knots of Wood In timber and wood science, a knot is the visible remnant of a tree’s branching process, appearing as a circular or oval imperfection embedded in the trunk or limbs [ 21 ] . Figure 1 illustrates two examples of a knot (marked in red). Knots occur naturally when subsequent trunk growth layers enclose a branch. They vary in size, color, and density, often appearing darker than the surrounding wood [ 3 ] . Depending on the different types and sizes, knots can reduce the cross sectional area and influence the fiber orientation around the knot differently, resulting in strength reduction to different extents. Knots can also cause stress concentration and may initiate failure at their adjacent locations much earlier than in sound wood. The strength prediction of timber engineering products generally involves knot assessment, which can be accomplished through surface scanning systems or X-ray systems [ 22 ] . Fig. 1 : Two examples of knots on the different surfaces of the same wooden board. They are paired to each other. II-B Object Detection in Wood Science Object detection and segmentation are crucial in wood science for identifying defects such as knots, cracks, and grain irregularities [ 23 , 24 ] . Unlike general object detection tasks, detecting knots poses unique challenges due to the low contrast, uniform color, and minimal texture variation of wood images, which are typically two-dimensional and captured under controlled conditions. These characteristics result in low information density, making it harder for models to distinguish knots from the background. YOLO (You Only Look Once) is the fast and precise state-of-the-art object detection model, but its performance suffers on wood images where knots are small, irregular, and lack distinct features [ 25 , 26 ] . Other models, such as DeepLabV3 [ 27 ] also struggle with the subtle contrasts and patterns of wood surfaces. Moreover, both models face limitations in industrial applications requiring real-time processing. YOLO’s efficiency drops with fine-grained detection, and DeepLabV3’s high computational demands make it impractical for fast workflows. II-C Knots Pairing Knot pairing refers to the process of identifying and matching knots across different surfaces of a wooden board to establish their spatial and geometric relationships. As shown in Figure 2 , a knot inside the wooden board can appear on multiple surfaces due to its three-dimensional structure. For instance, Knot A and Knot B are visible on adjacent surfaces. These knots represent