Exponential Dependence of Interlayer Exchange Coupling in Fe/MgO(001) Superlattices on Temperature

Nanny Strandqvist, Tobias Warnatz, Kristbjörg Anna Thórarinsdóttir, Alexei Vorobiev, Vassilios Kapaklis, Björgvin Hjörvarsson · 2025

Read Exponential Dependence of Interlayer Exchange Coupling in Fe/MgO(001) Superlattices on Temperature by Nanny Strandqvist, Tobias Warnatz, Kristbjörg Anna Thórarinsdóttir, Alexei Vorobiev, Vassilios Kapaklis, Björgvin Hjörvarsson (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-05141.txt.

Introduction

Nanny Strandqvist and five co-authors find that the magnetic conversation between iron layers grows exponentially as a layered sample cools. Their 2025 study uses superlattices of iron separated by magnesium oxide, a stack whose layers align in patterns set by quantum effects inside the spacer.

At warm temperatures, an applied field flips layers one sharp step at a time. Near 150 kelvin, the response changes character: the layers begin to rotate together instead. At the same point the resting pattern shifts, from layers pointing opposite each other to layers sitting at right angles. The team argues the switch comes from quantum well states set by the sample's total thickness. The findings matter for magnetic memory design.

Catalog record

CREATORNanny Strandqvist, Tobias Warnatz, Kristbjörg Anna Thórarinsdóttir, Alexei Vorobiev, Vassilios Kapaklis, Björgvin Hjörvarsson
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-05141

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Exponential Dependence of Interlayer Exchange Coupling in Fe/MgO(001) Superlattices on Temperature Nanny Strandqvist, Tobias Warnatz, Kristbjörg Anna Thórarinsdóttir, Alexei Vorobiev, Vassilios Kapaklis, Björgvin Hjörvarsson Abstract The interlayer exchange coupling in Fe/MgO(001) superlattices is found to increase exponentially with decreasing temperature. Around 150 K, the field induced response changes from discrete switching—governed by field-driven domain propagation—to a collective rotation of the magnetic layers. This transition is accompanied by a change in the magnetic ground state from 180 ∘ (antiferromagnetic) to 90 ∘ alignment between adjacent Fe layers. These effects are argued to arise from quantum well states, defined by the total thickness of the samples. Artificial superlattices are fascinating materials that provide a versatile platform for exploring emergent physical phenomena. Furthermore, their properties can be tailored by e.g. the choice of constituents, the thickness, and the thickness ratio of the layers Chang et al. 1973 ; Segmüller et al. 1977 ; Gossard 1979 ; Schuller 1980 . In semiconductor superlattices, the proximity of layers with different band gaps leads to the formation of quantum well states, with their own electronic structure and properties Esaki and Tsu 1970 . Similar quantum effects are observed in metallic superlattices where magnetic layers couple across non-magnetic layers through oscillatory interlayer exchange coupling (IEC) Bruno 1995 . In layers, such as MgO, the coupling strength is known to decrease exponentially with increasing thickness of the layer, which is typically attributed to spin-polarized tunneling Faure-Vincent et al. 2002 ; Chiang et al. 2009 ; Kozioł-Rachwał et al. 2014 ; Moubah et al. 2016 . Almost all prior studies on IEC in Fe/MgO heterostructures are based on trilayers, with a primary focus on device-related functionalities Parkin et al. 2004 ; Yuasa and Djayaprawira 2007 ; Bhatti et al. 2017 ; Lou et al. 2008 ; Parkin et al. 2008 . It is only recently the investigation of interlayer exchange coupling has been extended to include Fe/MgO(001) superlattices Moubah et al. 2016 ; Magnus et al. 2018 ; Warnatz et al. 2021 ; Ravensburg et al. 2024 . These exhibit discontinuous steps in the field response (digital hysteresis), arising from switching of individual Fe layers—a behavior attributed to the interplay between antiferromagnetic IEC and the intrinsic magnetic anisotropy of the Fe layers Moubah et al. 2016 . Moreover, the magnetic response has been found to depend on the number of Fe/MgO repetitions, which was argued to arise from long-range magnetic IEC Magnus et al. 2018 ; Warnatz et al. 2021 . The thickness of the Fe layers also has a profound effect on the strength of the IEC Ravensburg et al. 2024 . These findings highlight the need to account for all length-scales in the structure—including the MgO spacer, Fe layer, and the total thickness of the stack—when describing the coupling. In this Letter, we present the temperature dependence of the coupling and consider the underlying principles behind the obtained IEC in Fe/MgO(001) superlattices. Figure 1: In-plane hysteresis measured at room temperature by MOKE, along the Fe[100] easy axis for [Fe(2.0 nm)/MgO(1.7 nm)] N (001) superlattices with 2\leq N\leq 10 . The labels H_{\mathrm{1}} , H_{\mathrm{2}} , and H_{\mathrm{s}} denote the switching fields associated with each magnetization step, where H_{\mathrm{s}} corresponds to the field required to align all Fe layers. The growth and the structural characterization of the superlattices is briefly described in the supplemental material and cited references. The magnetic response was investigated using the magneto-optical Kerr effect (MOKE) and Vibrating Sample-Magnetometer (VSM). Normalized hysteresis loops for [Fe(2nm)/MgO(1.7nm)] N (001) superlattices with N= 2, 4, 8 and 10 bilayer repetitions are shown in Fig. 1 . These measurements were conducted at room temperature with an external magnetic field applied along a Fe [001] easy axis, and the hysteresis loops were corrected by removing the coercivity of the Fe layers, as described in Warnatz et al. 2021 , to better emphasize the reversibility—or lack thereof—in the switching behavior of the Fe layers. All samples exhibit discrete magnetic switching characterized by step-like features in the magnetization curves. These steps arise from the nucleation and propagation of 90^{\circ} domain walls across the full lateral extent of the 2 nm-thick Fe layers across the sample area of 1 cm 2 Chung et al. 2013 ; Magnus et al. 2018 ; Xu et al. 2018 . The switching is driven by the applied magnetic field, while IEC and magnetocrystalline anisotropy act as restoring forces. Consequently, the field value at each step is proportional to the strength of the IEC acting on the switching layer, when the field is aligned with the easy axis. For N=2 (see Fig. 1 a), a magnetic field of approximately 2.4 mT is required to align the magnetic moments of both Fe layers ( H_{\mathrm{s}} ). Upon reducing the field from saturation to zero, a single switching event is observed, resulting in a remanent magnetization of M/M_{0}\approx 0.5 . This value is consistent with the reversal of a single Fe layer, leading to a 90 ∘ alignment of the layers. The configuration is likely to be metastable, arising from the competition between a weak antiferromagnetic interlayer exchange coupling and the significantly stronger four-fold magnetocrystalline anisotropy Bellouard et al. 2008 ; Moubah et al. 2016 ; Magnus et al. 2018 ; Warnatz et al. 2020 . Figure 2: Normalized hysteresis loops measured along the Fe [100] easy direction for [Fe(2nm)/MgO(1.7nm)] 10 superlattice at 295, 165, and 20K (MOKE). The moment of the Fe layers is only modestly affected while the saturation field and the coercivity exhibits much stronger temperature dependence. Increasing the number of bilayers to four ( N=4 ) has a pronounced effect on the hysteresis curve, as shown in Fig. 1 b. In particular, the remanence at zero field becomes negligible, consistent with an antiferromagnetic alignment of the Fe layers. Three discrete steps are observed between remanence and saturation. The first step, occurring at H_{\mathrm{1}} , is approximately twice as large as the subsequent steps, corresponding to a magnetization change of M/M_{\mathrm{0}}\approx 0.5 . This step is attributed to the simultaneous switching of the top and bottom Fe layers, which each have only one nearest neighbor and therefore require a lower switching field—an effect that arises purely from the differing number of magnetic neighbors Warnatz et al. 2021 ; Magnus et al. 2018 . As the external field increases further, the remaining Fe layers are sequentially switched. The field required to align all four Fe layers parallel to the external field is H_{\mathrm{s}}\approx 16 mT. Similar behavior is observed for N=8 and 10 , as shown in Fig. 1 c–d. A clear change in the relative strength of the coupling is therefore observed. For example, in the sample with N=10 , the saturation field is approximately three times larger than H_{\mathrm{1}} . In the case of nearest neighbor interactions, H_{\mathrm{s}} would be expected to be twice as large as H_{\mathrm{1}} . Consequently, rationalization of the switching, within and between samples, requires interactions beyond nearest neighbor. Having established the switching properties of the samples at room temperature, we now examine the temperature dependence of the coupling strength in a sample with 10 repeats. For these measurements, the sample was initially cooled to 20 K, and in-plane hysteresis loops were

Read the complete text