Controlled Displacement of Stored Light at Room Temperature

Arash Ahmadi, Yağız Murat, Pei-Chen Kuan, Mustafa Gündoğan, Markus Krutzik · 2025

Read Controlled Displacement of Stored Light at Room Temperature by Arash Ahmadi, Yağız Murat, Pei-Chen Kuan, Mustafa Gündoğan, Markus Krutzik (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-02774.txt.

Introduction

Quantum memories store light and release it later, a key tool for quantum networks. Ahmadi and four co-authors show a stored pulse of light can also be shifted sideways in a controlled way. Their setup works at room temperature, with no need for deep cooling. The stored pulse moved by more than one wavelength of the light itself.

Using an interference setup, the team also measured how fast the stored light traveled during the shift. That turns a stopped-light experiment into a sensing tool. The authors say the trick widens what quantum memories can do beyond carrying information. It points toward new ways of measuring tiny speeds with high sensitivity, using light that has been parked and moved on demand inside a memory device.

Catalog record

CREATORArash Ahmadi, Yağız Murat, Pei-Chen Kuan, Mustafa Gündoğan, Markus Krutzik
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-02774

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Controlled Displacement of Stored Light at Room Temperature Arash Ahmadi, Yağız Murat, Pei-Chen Kuan, Mustafa Gündoğan, Markus Krutzik Abstract We report the demonstration of spatially translating a stored optical pulse at room temperature over distances exceeding one optical wavelength. By implementing an interferometric scheme, we further measure the average speed of this linear translation, thus harnessing a stopped-light experiment for a sensing application. This work extends the use of quantum memories beyond quantum communication and information contexts, opening a pathway to novel methods of velocity measurements with high sensitivity. Quantum memories (QMs) are key elements of quantum information and communication systems, where precise control over both the storage and manipulation of information is essential for building scalable quantum networks Kimble 2008 ; Sangouard et al. 2011 ; Heshami et al. 2016 . Atomic ensembles are suitable for implementing such memories, as they exhibit high optical depth, tunable frequency range and long-lived spin states, leading to high storage efficiency, extended storage durations, and robust phase coherence. Electromagnetically induced transparency (EIT) in a \Lambda- type three-level atomic system has become one of the most established methods to realize such memories Lei et al. 2023 , and has been implemented in cryogenic solid-state systems Turukhin et al. 2001 ; Heinze et al. 2013 , ultracold and cold atomic ensembles Riedl et al. 2012 ; Zhao et al. 2009 ; Park et al. 2016 ; Cho et al. 2016 ; Vernaz-Gris et al. 2018 ; Hsiao et al. 2018 and warm alkali vapors Mair et al. 2002 ; Katz and Firstenberg 2018 ; Ma et al. 2022 . Notably, the phase of the retrieved signal can be directly measured and compared to that of the stored pulse Chen et al. 2005 ; Jeong et al. 2017 , thereby enabling the exploitation of this phase information to monitor additional parameters, such as the spatial displacement of the stored light, during the storage process. Such an ability is beneficial, as physical reconfiguration of atomic arrays can enhance quantum processing Bluvstein et al. 2024 , and transport of quantum memories to improve quantum communication Gündoǧan et al. 2024 and astronomical interferometry Bland-Hawthorn et al. 2021 has been proposed. The idea of storing light in a moving atomic medium and retrieving it at a different location has long been proposed Juzeliūnas et al. 2003 . Here, the continuous wave (CW) control fields are launched perpendicular to the direction of the moving medium, and the passage of atoms through the optical fields define the adiabatic switching of the control field on and off. Such a configuration is helpful in cases that the arrival of the probe pulse cannot be fully determined, e.g. it is originated in spontaneous processes. However, the other features of the storage process, the pulse profiles, storage time, etc., cannot be controlled. On the other had, it has been experimentally shown that spin coherence in warm alkali vapor can diffuse over extended spatial regions without dephasing Zibrov et al. 2002 ; Xiao et al. 2008 . However, in these studies, the spatial displacement of the stored information is not actively controlled and relies on the random motion of the atoms. Ginsberg et al. Ginsberg et al. 2007 were the first to demonstrate the transfer of stopped light, storing an optical pulse in a Bose–Einstein condensate (BEC) and subsequently transferring it to another BEC located 160 µ m away. Furthermore, the preservation of spin coherence during macroscopic displacement in an optical conveyor belt Kuhr et al. 2003 ; Xin et al. 2019 paved the way for transporting stored light in cold atoms confined by an optical lattice Li et al. 2020 , where a stored optical pulse was displaced in a controlled manner through a hollow-core fiber over a distance \mathrm{\Delta x=1.2} mm. Figure 1: Basics of the measurement procedure. a) The basic principle behind measuring the displacement of the stored light. An optical pulse is stored in the medium and upon its retrieval, the phase of the retrieved pulse is fixed with respect to the memory frame. Displacement is measured by comparing phase of the retrieved pulse at two separate instances in the lab frame. b) The \Lambda -scheme used for realizing EIT and light storage. c) A schematic of the memory section. The cesium vapor cell is magnetically shielded and placed on the translation stage. All the optical fields are derived from one single laser and the control is launched from the translation stage to insure a fixed write/read phase as the stage moves. Polarization suppression clears control from probe, and before detection, the reference field is combined with the probe pulse sequence to generate a intra-pulse beating signal for detecting the phase shift. In this Letter, we report on the controlled transport of an optical pulse stored within an alkali vapor cell. We furthermore infer information on the displacement of the stored pulse by monitoring its phase before and after the storage process. Figure 1 illustrates both the experimental setup and the fundamental measurement principle. The phase of the retrieved pulse is unchanged in the reference frame of the QM, but not in the lab frame. When the vapor cell is moved in space, comparing the phase of the retrieved pulse to that of a reference field leads to measuring the traveled distance. Light storage is accomplished via implementation of resonant EIT in the D1 line of cesium. The \Lambda -type atomic scheme consists of the ground states \ket{\mathrm{F=3}} and \ket{\mathrm{F=4}} , and the excited state \ket{\mathrm{F^{\prime}=3}} . A strong control field, offset-locked to the \ket{\mathrm{F}=4}\text{--}\ket{\mathrm{F^{\prime}=3}} transition, establishes the transparency condition. A small fraction of this control beam is frequency-shifted by 9.2 GHz using an electro-optic modulator (EOM) to resonate with the \ket{\mathrm{F=3}}\text{--}\ket{\mathrm{F^{\prime}=3}} transition, thus forming the probe beam. This method ensures an intrinsically high phase coherence between the probe and control fields. Pulse shaping is achieved through acousto-optic modulators (AOMs), driven by an arbitrary waveform generator (AWG). The probe and control beams have diameters of 1 mm and 2 mm, with peak powers \mathrm{P_{P}=50\,\textup{\textmu W}} ( \mathrm{\Omega_{P}=2\pi\times 7\,\/MHz} ) and \mathrm{P_{C}=10} mW ( \mathrm{\Omega_{C}=2\pi\times 70\,\/MHz} ), respectively. The vapor cell, containing 10 Torr of nitrogen ( \mathrm{N_{2}} ) buffer gas, is housed within two layers of µ -metal magnetic shielding and heated to 45 °C to reach an optimal optical density. The entire cell assembly is mounted on a translation stage with a minimum incremental motion of 1 nm. To precisely measure the phase shift of the probe pulse, we generate a reference field by passing the probe through an AOM, shifting its frequency by 80 MHz. Prior to pulsing the probe beam and guiding it to the vapor cell, a portion of the probe beam is beated with this reference field and creates a CW 80 MHz beat signal. This beat signal is then detected by an avalanche photodetector (APD1) and provides a stable reference for measuring the phase shift. This reference beat signal practically acts as a ruler to infer the displacement of the vapor cell during light storage. In order to monitor the phase shift in the storage process, a portion of the reference field is beated with the probe field after the vapor cell and prior to its detection

Read the complete text