Landau levels in Weyl semimetal under uniaxial strain

Shivam Yadav, Andrzej Ptok · 2025

Read Landau levels in Weyl semimetal under uniaxial strain by Shivam Yadav, Andrzej Ptok (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-01756.txt.

Introduction

Shivam Yadav and Andrzej Ptok study how stretching a Weyl semimetal changes the energy steps its electrons can take in a magnetic field. Their paper appeared in two thousand twenty-five. In these materials, strain acts much like a magnetic field of its own. That fake field can outgrow real ones, opening a lab route to strong-field effects.

They model the stretch with both a smooth theory and a lattice picture. In the smooth view, one-way strain rescales the effective field, which shifts the Landau steps upward in energy. In the lattice view, strain bends the hopping strengths between sites. The spectrum then blooms into the famous butterfly pattern. Both views agree that the field gets renormalized. The work helps design strain-tuned quantum materials.

Catalog record

CREATORShivam Yadav, Andrzej Ptok
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-01756

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Landau levels in Weyl semimetal under uniaxial strain Shivam Yadav, Andrzej Ptok Abstract The external strain can lead to the similar effect to the external applied magnetic field. Such pseudomagnetic field can be larger than typical magnetic fields, what gives the opportunity to experimentally study the Landau levels. In this paper we study the effects of uniaxial strain on the Weyl nodes, using continuum and lattice model. In the continuum model we show that the uniaxial strain leads to magnetic field renormalization, which in practice corresponds to the shift of the Landau levels to higher energy. We also investigate type-I and type-II Weyl nodes using lattice model. In this case, the magnetic field is introduced by the Pierels substitution, while uniaxial strain by the direction dependence of hopping integrals. This allowed us to probe the Landau level and system spectrum which takes form of Hofstadter butterfly. We show that the renormalization of magnetic field, similar to this observed in the continuum model, emerges. I Introduction In the case of the simplest systems with manifested Dirac cones for example graphene with the honeycomb lattice structure, the external strain can lead to the effects similar to the external applied magnetic field [ 1 ] . The strain acts as a “chiral” vector potential that couples to Dirac fermions oppositely in the two valleys K and K’. Such a pseudomagnetic field can be larger than 300 T and has been observed through the spectroscopic measurement of the Landau levels (LLs) [ 2 ] . However, the linear dispersion relation in the low-energy electronic excitations around the Fermi level, similar to that observed in the graphene, can be also be found in the Weyl semimetals (WSMs). One of the characteristics features of the Dirac spectrum is its LLs structure. The dependence of the cyclotron frequency on the magnetic field and the spacing of the LLs distinguishes the WSMs from the other nonrelativistic electron systems. Moreover, the zeroth LL with linear dispersion is observed [ 3 ] . The impact of the strain can be studied by the precise investigation of the LLs. The famous chiral anomaly can be induced in the WSM nanowire under torsion [ 4 ] . Additionally, the time dependent mechanical distortion can not only produce pseudo magnetic field but also a pseudo electric field and can have a full electromagnetic response which can be observed in Hall viscosity [ 5 , 6 ] , anomalous Hall effect [ 7 ] and resistance of WSM nano wire under torsion [ 4 ] . Moreover, it can also cause LL collapse [ 8 , 9 ] . Discovery of the three-dimensional Dirac and WSMs [ 10 , 11 ] , like TaAs [ 12 , 13 , 14 , 15 , 16 ] , Na 3 Bi [ 17 , 18 , 19 ] , or Cd 3 As 2 [ 20 , 21 , 22 ] , provides the opportunity to study of the impact of the strain on the relativistic electronic excitations in the real materials. Additionally, these systems can be excellent platform to the study of the topological properties of WSM under external conditions. More realistic DFT calculations indicate that the strain strongly affects the Weyl nodes [ 23 , 24 , 25 , 26 , 27 ] . For example, the total number of the realized Weyl nodes in the system can depend on strain. Moreover, in some extreme situations strain can lead to total destruction of Weyl nodes, or destroy the topological phase [ 28 ] . Such modification should be also reflected in the transport properties of the WSMs [ 29 ] . The biaxial strain can lead to increasing of the superconducting temperature transition. This was observed experimentally for example in type-II WSM MoTe 2 [ 30 ] . Figure 1: Schematic depicts impact of uniaxial strain on dispersion relation of the Weyl semimetal. Yellow cones represent a Weyl node in the absence of external strain, while blue deformed cone represents a Weyl node in the presence of external uniaxial strain (represented by turquoise arrows) along fixed direction. Under uniaxial strain, circular constant energy contour deforms into an ellipse shown by gray solid lines, and elliptical Weyl cone emerge. Presented schematic representation correspond directly the system described in Sec. II . A WSM whe subjected to an inhomogenous strain [ 31 , 4 ] the strain gives rise to a guage which couples with the Weyl fermions which quantizes the spectrum giving rise to Landau level-like structure which are termed as pseudo Landau levels. This gauge can also be introduced by magnetically doping a topological insulator [ 32 ] . Another way to accomplish the chiral pseudo magnetic field is by introduction of screw or edge lattice dislocation of WSM [ 33 ] . The inhomogenous strain morphs the separation between the Weyl nodes by making it space dependent. Curl of this space dependence of the separation of Weyl nodes can be interpreted as an axial field analogous to magnetic field. Usually this pseudo magnetic field is incorporated in the effective model of WSM as a perturbation to the linear Hamiltonian [ 7 , 32 ] and on other occasions by studying the 2D lattice deformation under the application of inhomogenous strain [ 5 , 6 ] . In the simplest approximation, we can assume is a homogenous uniaxial strain along some direction (perpendicular to the z axis), leads to the linear deformation of the system within elastic limit. Consequently, we can assume that the electron dispersion also exhibits similar deformation (Fig. 1 ). Initially ideal Weyl cone (represented by the yellow surface) is deformed to the elliptical Weyl cone (represented the blue surfaces). In our paper, we study the physical properties of the system with pair of elliptical Weyl cones, realized by application of a homogenous uniaxial strain on the system. More directly, we discuss the Landau levels spectra within the continuum model (Sec. II ) and system spectra using the lattice model (Sec. III ). We show that the uniaxial strain acts on the system as a renormalised magnetic field in both cases. Finally, we conclude our findings in Sec. IV . II Continuum model description We start our investigation with the study of the continuum model. We begin with the two band low energy effective model for 2 Weyl node in the absence of strain [ 34 , 35 ] : \displaystyle\mathcal{H} \displaystyle= \displaystyle t_{x}\,k_{x}\sigma_{x}+t_{y}\,k_{y}\sigma_{y}+w(k^{2}_{z}-\Delta)\sigma_{z}. (1) We are working in natural units hence \hbar=c=1 . The Weyl nodes appear at \pm\sqrt{\Delta} , this makes the separation between the Weyl nodes 2\sqrt{\Delta} . It is easily seen that w carries the dimensions of inverse mass along with t_{x} and t_{y} being dimensionless. In the elastic limit, the uniaxial strain leads to the linear modification of the displacement between orbitals of neighbouring atoms. This feature can be captured by the renormalizing of the hopping integrals [ 6 ] : \displaystyle t_{x}\rightarrow\gamma_{-}t_{x},\quad\text{and}\quad t_{y}\rightarrow\gamma_{+}t_{y}, (2) where we introduce \gamma_{\pm}=1\pm\alpha . Here \alpha denotes the parameter controlling strain within xy plane (what is schematically presented in Fig. 1 ). Additionally, we assume that t_{x}=t_{y}=t , as we will see later in this section, this hardly changes the

Read the complete text