Microwave-field quantum metrology with error correction enabled by Rydberg atoms
Stanisław Kurzyna, Bartosz Niewelt, Mateusz Mazelanik, Wojciech Wasilewski, Rafał Demkowicz-Dobrzański, Michał Parniak · 2025
Read Microwave-field quantum metrology with error correction enabled by Rydberg atoms by Stanisław Kurzyna, Bartosz Niewelt, Mateusz Mazelanik, Wojciech Wasilewski, Rafał Demkowicz-Dobrzański, Michał Parniak (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-01506.txt.
Introduction
Stanisław Kurzyna and co-authors use Rydberg atoms to measure microwave fields with quantum precision while shrugging off detection losses. Quantum sensors promise unmatched sensitivity, yet photons lost at readout often erase the advantage. Rydberg atoms, with their huge dipole moments, both sense fields strongly and can process quantum information.
The team senses with an ensemble of such atoms, reaching fine microwave sensitivity. Then interactions between the atoms run an error-prevention protocol that protects the result against lost detections. Mixing sensing and computing in one atomic system is the trick. Robust quantum metrology like this matters for radar, communications, and fundamental field measurements outside the lab.
Catalog record
| CREATOR | Stanisław Kurzyna, Bartosz Niewelt, Mateusz Mazelanik, Wojciech Wasilewski, Rafał Demkowicz-Dobrzański, Michał Parniak |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-01506
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Microwave-field quantum metrology with error correction enabled by Rydberg atoms Stanisław Kurzyna, Bartosz Niewelt, Mateusz Mazelanik, Wojciech Wasilewski, Rafał Demkowicz-Dobrzański, Michał Parniak Abstract Quantum sensing and metrology present one of the most promising near-term applications in the field of quantum technologies, with quantum sensors enabling unprecedented precision in measurements of electric, magnetic or gravitational fields and displacements. Experimental loss at the detection stage remains one of the key obstacles to achieve a truly quantum advantage in many practical scenarios. Here we combine capabilities of Rydberg atoms to both sense external fields and to be used for quantum information processing to largely overcome the issue of detection losses. While using the large dipole moments of Rydberg atoms in an ensemble to achieve a 39 nV cm − 1 Hz − 1 / 2 39\text{\,}\mathrm{nV}\text{\,}{\mathrm{cm}}^{-1}\text{\,}{\mathrm{Hz}}^{-1/2} sensitivity we employ the inter-atomic dipolar interactions to execute an error-correction protocol, that protects sensing information against conventional losses at the detection stage. Counterintuitively, the idea of the protocol is based on introduction of additional non-linear lossy quantum channel, which results in enhancement of Fisher information by a factor of 3.3. The presented results open up a path towards broader usage of quantum-information-inspired error correction in practical quantum metrology and communication, without the need for a general-purpose quantum computer. I Introduction Rydberg atoms currently find exciting applications both in quantum computing or simulation as well as in quantum metrology. Those atomic system provide a controllable platform to engineer atomic interactions Li and Kuzmich 2016 ; Günter et al. 2012 ; Zhao et al. 2023 enabling reliable quantum computation Bluvstein et al. 2024 ; Cohen and Thompson 2021 ; Saffman 2016 ; Spong et al. 2021 , quantum simulations Weimer et al. 2010 ; Scholl et al. 2021 ; Browaeys and Lahaye 2020 , and high-fidelity entanglement generation Madjarov et al. 2020 ; Li et al. 2013 ; Saffman and Walker 2002 ; Bariani et al. 2012 . Recent developments of Rydberg-assisted atomic sensors have demonstrated their key role in imaging Wade et al. 2017 , and electromagnetic wave transduction Borówka et al. 2024 ; Wade et al. 2017 . For metrological applications, it is an essential advantage to use as many sensing particles as possible rather than single atoms. Collective atomic states enhance the sensitivity of atomic-based sensors Saleem et al. 2024 ; Shaw et al. 2024 ; Robinson et al. 2024 and in synergy with a large dipole moment of Rydberg-excited ensembles, they could revolutionize the field of electromagnetic sensing. These highly excited collective states are a topic of extensive interest Maxwell et al. 2013 . Atomic qubits made with collective states Spong et al. 2021 show promising applications also in quantum computing and quantum networking, enabling Rydberg-mediated photon-photon interactions Tiarks et al. 2019 or atom-ensemble entanglement Li et al. 2019 . The lifetime of those qubits has also been extended significantly with recent advances Kurzyna et al. 2024 ; Jiao et al. 2025 . The combination of metrological and quantum-computational applications of Rydberg atoms brings about a challenge to combine the two ideas and utilize the versatility of quantum information processing to enhance the metrological performance. One step in this direction has been the development of spin-squeezed systems using Rydberg atoms, in particular for atomic-optical clocks Carrasco et al. 2022 ; Huang et al. 2023 . Another essential idea is to attempt to use error-correction enabled by quantum operations to improve metrology protocols Zhou et al. 2018 . Figure 1: (a) Scheme of the precision enhancement protocol. After encoding the parameter \theta the system undergoes correction noted with \Lambda . Later, both modes p and d are measured with efficiency \eta . (b) Action of a lossy channel on the states. The proposed interaction removes the red component, which introduces an overlapping decay paths and leaves black components with reversible decay paths. (c) Increase of Fisher information with the proposed interaction for a range of detection efficiencies \eta . (d) The upper plot shows expectation values of excitation number operators on the state. The dashed lines represent expectation values without the operation. The lower plot shows the Fisher information and its enhancement for some values of the encoded parameter. The dashed line represents Fisher information without the operation. For example, imperfections in experimental setups and non-ideal measurements introduce losses, which cause photon-loss error and are often difficult to mitigate. Optimal estimation in real conditions is captured by the Cramér-Rao bound Kay 1993 , which ties the amount of Fisher information (FI) with the maximum possible precision of the measurement. In case of estimation of a parameter encoded in a quantum state \rho_{\theta} , the ultimate precision limit is set by the quantum Fisher information (QFI) \mathcal{F}_{Q}\left(\rho_{\theta}\right) Helstrom 1976 ; Braunstein and Caves 1994 : \Delta\theta\geq 1/\sqrt{\mathcal{F}_{Q}\left(\rho_{\theta}\right)}, (1) where optimization over all measurement schemes is taken into account. In typical situations where detection losses act independently on each sensing particle, and no error-correction procedure is implemented, the obtainable information is reduced to \eta\,\mathcal{F}_{Q} , where \eta is the detection efficiency. In this paper we build on the idea that one may apply an additional quantum operation on the state, before it is subject to lossy measurement Len et al. 2022 , making it less supceptible to losses and in this way protecting the encoded information. This operation may be viewed as a form of an error-correction protocol, as the applied operation modifies the way the sensing information is encoded in the state, so that even after experiencing losses it may still be recovered. Remarkably, the operation we propose introduces in fact additional non-linear losses to the setup, that nevertheless, make the sensing particles more robust to subsequent detection losses, and effectively increases the FI. Furthermore, using novel tools, designed to identify the optimal quantum metrological protocols in presence of noise, we show that the proposed approach is optimal in the simplest non-trivial case of two sensing particles, proving no other quantum protocol, no matter how general, could offer better performance given the level of detection losses present. We demonstrate an experimental implementation of this protocol using collectively excited Rydberg states, where the key element are interatomic interactions and the sensitivity to weak microwave fields is enabled by the huge dipole moments. The collective states allow excellent coupling to light and the large size of the atomic ensemble enables usage of many sensors particles in each experimental shot. The error-correcting operation is based on dipolar Rydberg interactions, hence taking advantage of various aspects of intricate Rydberg physics simultaneously. We also take inspiration from the progress on lifetime prolongation methods and use a novel protocol that stops the thermal decoherence caused by atomic motion making long-lasting interactions possible. With this, we achieve both excellent and quantum-enhanced sensitivity to an external microwave field, showing a direct application of error correction or mitigation in quantum metrology Takagi et al. 2022 . II Results II.1 Model We will start by introducing a toy model that demonstrates an advantage in a practical protocol via a simple error-correcting operation, for a case of two sensor particles. Let us consider a simple model, where we assume that we are working in Hilbert space limited to two or fewer bosonic excitations distributed among two modes