A high-order combined interpolation/finite element technique for evolutionary coupled groundwater-surface water problem

Eric Ngondiep, Areej A. Binsultan, Ibtisam M. Aldawish, · 2025

Read A high-order combined interpolation/finite element technique for evolutionary coupled groundwater-surface water problem by Eric Ngondiep, Areej A. Binsultan, Ibtisam M. Aldawish, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-00707.txt.

Introduction

Eric Ngondiep and co-authors build a high-grade count craft for linked ground and top water flow in cracked rock lands. Such flows rule how springs and streams trade water, a core ask in lime-rock yards. Their 2025 craft reads the time slope by smooth block fills of the past steps and the space slopes by patch nets of two grades. Proofs set the craft firm in the top span mark, with time truth of the next grade and space truth one past the low grade.

No bound binds the step size for the firm mark to hold. Test sums back the proofs. The craft runs fast next to a wide flock of past ways on the same start-edge task. True swift counts can serve water boards that must call floods and droughts.

Catalog record

CREATOREric Ngondiep, Areej A. Binsultan, Ibtisam M. Aldawish,
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE68 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-00707

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A high-order combined interpolation/finite element technique for evolutionary coupled groundwater-surface water problem Eric Ngondiep, Areej A. Binsultan, Ibtisam M. Aldawish, Abstract Abstract. A high-order combined interpolation/finite element technique is developed for solving the coupled groundwater-surface water system that governs flows in karst aquifers. In the proposed high-order scheme we approximate the time derivative with piecewise polynomial interpolation of second-order and use the finite element discretization of piecewise polynomials of degree d and d+1 , where d\geq 2 is an integer, to approximate the space derivatives. The stability together with the error estimates of the constructed technique are established in L^{\infty}(0,T;\text{\,}L^{2}) -norm. The analysis suggests that the developed computational technique is unconditionally stable, temporal second-order accurate and convergence in space of order d+1 . Furthermore, the new approach is faster and more efficient than a broad range of numerical methods discussed in the literature for the given initial-boundary value problem. Some examples are carried out to confirm the theoretical results. Keywords: evolutionary coupled groundwater-surface water problem, interpolation technique, finite element method, a hybrid higher-order unconditionally stable interpolation/finite element approach, stability analysis and error estimates. AMS Subject Classification (MSC). 65M10, 65M05 . 1 Introduction and preliminaries The coupled surface flow and porous media flow with interface conditions arises in many applications in applied sciences and engineering including: fluid flow in porous media [ 13 ] , subsurface flow systems [ 3 , 8 ] , filtration problems in engineering [ 31 ] , etc… The macroscopic properties of filtration processes are described using the coupled groundwater-surface water model. These processes find several applications in porous media problems such as: oil filtering through rocks/sand and water flowing across semi-permeable soil. The mixed Stokes-Darcy consists of Stokes equations and Darcy’s law to govern the flow in the conduits and porous media, respectively, together with the interface conditions to couple both flows [ 3 , 23 , 6 , 24 ] . A large class of numerical methods for solving complex ordinary/partial differential equations (ODEs/PDEs) [ 25 , 28 ] such as the mixed Stokes-Darcy model have been developed at a moment when it was prohibited to use the Navier-Stokes equations [ 26 ] for modeling many problems because of CPU required and large computer memory. In this paper, we focus on the coupled unsteady groundwater-surface water problem. As literature on numerical methods and applications, interested readers can consult [ 20 , 15 , 10 , 21 , 11 , 2 , 19 ] and references therein. Figure 1: Configuration of a coupled groundwater-surface water flow separated with an interface I We consider a fluid flow in domain \Omega_{f}\subset\mathbb{R}^{m} coupled with a porous media flow in region \Omega_{p}\subset\mathbb{R}^{m} , where m=2 or 3 , and lie across an interface I from each other, where \Omega_{s} , s\in\{f,p\} , are bounded domains satisfying: \Omega_{f}\cap\Omega_{p}=\emptyset and \overline{\Omega}_{f}\cap\overline{\Omega}_{p}=I (see Figure 1 ). Set \overline{\Omega}=\overline{\Omega}_{f}\cup\overline{\Omega}_{p} and let n_{f} and n_{p} be the unit outward normal vectors on \Gamma_{f}=\partial\Omega_{f} (boundary of \Omega_{f} ) and \Gamma_{p}=\partial\Omega_{p} (boundary of \Omega_{p} ), respectively. Denote \tau_{l}, l=1,2,...,m-1, be the unit tangential vectors on the interface coupling I . We remind that n_{f}=-n_{p} . The fluid velocity v , fluid pressure p , and hydraulic head \phi satisfy the following equations [ 4 ] v_{t}-\nu\Delta v+\nabla p=f(x,t),\text{\,\,\,\,\,in\,\,\,}\Omega_{f}\times[0,\text{\,}T], (1) \nabla\cdot v=0,\text{\,\,\,\,\,in\,\,\,}\Omega_{f}\times[0,\text{\,}T], (2) S_{0}\phi_{t}-\nabla\cdot(\mathcal{K}\nabla\phi)=g_{0}(x,t),\text{\,\,\,\,\,in\,\,\,}\Omega_{p}\times[0,\text{\,}T], (3) v_{p}=-\frac{1}{\eta}\mathcal{K}\nabla\phi,\text{\,\,\,\,\,in\,\,\,}\Omega_{p}\times[0,\text{\,}T], (4) subject to initial conditions v(x,0)=v_{0}(x),\text{\,\,\,for\,\,}x\in\Omega_{f}\text{\,\,\,\,\,and\,\,\,\,\,}\phi(x,0)=\phi_{0}(x),\text{\,\,\,for\,\,}x\in\Omega_{p}, (5) and boundary conditions v(x,t)=0,\text{\,\,\,on\,\,}(\Gamma_{f}\setminus I)\times[0,\text{\,}T]\text{\,\,\,\,\,and\,\,\,\,\,}\phi(x,t)=0,\text{\,\,\,on\,\,}(\Gamma_{p}\setminus I)\times[0,\text{\,}T], (6) +\text{\,\,coupling\,\,\,conditions\,\,\,across\,\,}I, where T>0 is a constant. The interface conditions are the conservation of mass, balance of normal forces and Beavers-Joseph-Saffman condition on the tangential vectors given in [ 5 , 16 ] by v^{T}n_{f}=\frac{1}{\eta}\mathcal{K}(\nabla\phi)^{T}n_{p},\text{\,\,\,\,\,\,\,\,on\,\,}I, (7) p-\nu n_{f}^{T}(\nabla v)n_{f}=\rho g\phi,\text{\,\,\,\,\,\,\,\,on\,\,}I, (8) \nu(\tau_{l})^{T}\frac{\partial v}{\partial n_{f}}=-\frac{\alpha}{\sqrt{\tau_{l}^{T}\mathcal{K}\tau_{l}}}v^{T}\tau_{l},\text{\,\,\,\,\,\,\,\,on\,\,}I, (9) for l=1,...,m-1 , where u^{T} designates the transpose of the vector u . Here: \nu , v , p and f denote the kinematic viscosity, Stokes velocity of the fluid flow in \Omega_{f} , kinetic pressure and external force, respectively, while \eta , S_{0} , \phi , \mathcal{K} , g_{0} and v_{p} represent the volumetric porosity, specific mass storativity, piezometric head, hydraulic conductivity tensor, source term and fluid velocity in \Omega_{p} , respectively. Furthermore, v_{t} designates \frac{\partial v}{\partial t} , \Delta and \nabla mean the laplacian and gradient operators, respectively. \rho denotes the fluid density whereas g represents the gravitational acceleration. We assume that \mathcal{K}\in\mathcal{M}_{m}(\mathcal{C}(\overline{\Omega}_{p})) (space of m\times m matrices with elements in \mathcal{C}(\overline{\Omega}_{p}) which is the space of continuous functions over the compact domain \overline{\Omega}_{p} ), is a non diagonal symmetric positive definite matrix. This indicates that the porous media is nonhomogeneous. In this paper, we construct a hybrid higher-order unconditionally stable approach for solving the evolutionary coupled groundwater-surface water problem (\ref{1}) - (\ref{6}) . As discussed in [ 25 , 22 ] , there are many reasons that have motivated several researchers to develop efficient approaches for decoupling multiphysic coupled problems and thus derive single model solvers that could be applied with little extra computational and software overhead. However, some authors [ 7 , 22 , 11 ] have constructed decoupled schemes for the stationary Stokes-Darcy model whereas the evolutionary groundwater-surface water problem has been deeply analyzed by the use of iterative and non-iterative solvers [ 12 , 26 , 9 , 17 , 28 ] . The numerical method we propose in a computed solution of the initial-boundary value problem (\ref{1}) - (\ref{6}) is a three-level scheme motivated by the form of coupling. The time derivative is approximated by a second order interpolation technique while we approximate the space derivatives using the finite element method. The obtained computational scheme, so called a hybrid higher-order interpolation/finite element approach is unconditionally stable without the addition of stabilization terms (see for example the discussion in [ 17 ] regarding the addition of stabilization terms), temporal second-order accurate and spatial convergent with order O(h^{d+1}) , where h denotes the mesh space and d is a positive integer. Additionally, because of its unconditional stability and higher-order accuracy it’s a satisfactory computational technique for solving high Reynolds number flow where the elliptic interaction region can be compared to subsonic region thickness. This should lead to small time steps and thus higher computational costs if explicit numerical schemes, hybrid methods without stabilization terms or first-order implicit procedures are used such as: MacCormack approach [ 1 ] , Leap-frog/Crank-Nicolson formulation [ 18 ] , decoupled/decoupling techniques [ 21 , 32 ] and MacCormack rapid solver [ 27 ] . Furthermore, the developed higher-order numerical approach is easy to implement, faster and more efficient than a large class of numerical schemes developed in the literature [ 33 , 21 , 26 , 29 , 33 ] for solving the initial-boundary value problem (\ref{1}) - (\ref{6}) . In addition, the new algorithm overcomes the drawbacks (severe stability restriction, lower accuracy, no stabilization term, etc…) raised by the methods mentioned above. The highlights of this work are the following. (i) Construction of a hybrid higher-order unconditionally stable interpolation/finite element technique in an approximate solution of the evolutionary groundwater-surface water problem (\ref{1}) - (\ref{6}) . (ii) Analysis of unconditional stability and error estimates of the proposed approach. (iii) Numerical experiments to confirm the theoretical studies and to demonstrate the efficiency and validity of the new algorithm. In the remainder of the paper

Read the complete text