A continuum thermodynamic model of the influence of non-ionic surfactant on mass transfer from gas bubbles
Dieter Bothe, Akio Tomiyama · 2025
Read A continuum thermodynamic model of the influence of non-ionic surfactant on mass transfer from gas bubbles by Dieter Bothe, Akio Tomiyama (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-00581.txt.
Introduction
Dieter Bothe and Akio Tomiyama model how soap-like substances change the rate at which gas leaves a rising bubble. Such surfactants gather at the bubble's skin and change its surface tension unevenly, which stirs the nearby liquid. Their coverage also blocks gas from crossing, an effect most current models leave out.
The authors test an extended sharp-interface model that counts both adsorbed surfactant and gas species at the surface. In this picture, transfer happens in two exchange steps, into the surface layer and out of it, which naturally creates the blocking effect. The model matched lab measurements of carbon dioxide bubbles dissolving in surfactant solutions closely. Better bubble models matter for chemical plants, wastewater treatment, and carbon capture gear.
Catalog record
| CREATOR | Dieter Bothe, Akio Tomiyama |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-00581
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A continuum thermodynamic model of the influence of non-ionic surfactant on mass transfer from gas bubbles Dieter Bothe, Akio Tomiyama Abstract . Mass transfer of gaseous components from rising bubbles to the ambient liquid depends not only on the chemical potential difference of the transfer component but also on the interfacial free energy and composition. The latter is strongly affected by surface active agents that are present in many applications. Surfactants lead to local changes in the interfacial tension, which influence the mass transfer rates in two different ways. On the one hand, inhomogeneous interfacial tension leads to Marangoni stress, which can strongly change the local hydrodynamics. One the other hand, the coverage by surfactant molecules results in a mass transfer resistance. This hindrance effect is not included in current continuum physical models. The present work provides the experimental validation of a recently introduced extended sharp-interface model for two-phase flows with mass transfer that also accounts for the mass transfer hindrance due to adsorbed surfactant. The crucial feature is to account for area-specific concentrations not only of adsorbed constituents but also of transfer species, and to model mass transfer as a series of two bi-directional sorption-type bulk-interface exchange processes. The resulting model is shown to quantitatively describe experimental measurements on mass transfer reduction for the dissolution of CO 2 bubbles in different surfactant solutions. Keywords: Mass transfer hindrance, soluble surfactant, interface chemical potentials, interfacial entropy production, jump conditions, surface tension effects. 1. Introduction Multicomponent two-phase fluid systems are ubiquitous in nature, science and engineering. Prominent examples are droplets in the atmosphere, forming clouds or fog, the spray of water droplets in breaking waves, gas bubbles rising through water in rivers, natural lakes or oceans, or bubbles being dispersed in other liquids within technical contact apparatuses such as bubble columns or extraction columns. In all these examples, two bulk fluid phases are in contact at a deformable interface which is free to move. The presence of such an interface results from either no or partial miscibility on the molecular scale of two different fluids in contact, e.g. oil and water, or the coexistence of a liquid and its own vapour. In the vast majority of such two-phase fluid systems, at least two different chemical constituents (species) are present; the only exception would be a liquid/vapour system without any impurities. In fact, the prototypical case is that of several chemical species being mixed on the molecular scale. For instance, in case of an air bubble in water, the list of involved constituents includes water, nitrogen, oxygen and carbon dioxide, among others. Consequently, the generic two-phase fluid system is composed of two multicomponent mixtures, which form the two bulk phases, being in contact at their common interface. Two-phase fluid systems which are out of equilibrium exchange mass, momentum and energy. In multicomponent systems away from chemical equilibrium, matter will be exchanged across the interface, i.e. a transfer of chemical constituents takes place. Any such process in which a certain species is exchanged is termed ’mass transfer’ in Chemical Engineering, a notion which we also follow here. Mass transfer occurs in all of the examples given above, such as ocean-atmospheric exchange of gaseous components (including CO 2 as a most relevant topic) [ 37 , 58 , 27 ] , cloud physicochemistry [ 54 ] , gas scrubbing processes [ 14 ] , aeration for oxygen supply in bio-reactors, e.g. for waste water treatment [ 57 , 35 ] , reactive bubble column processes [ 20 , 2 , 48 ] etc. In particular in two-phase chemical reactors, the transfer of chemical species is the necessary prerequisite in order for the desired chemical reactions to occur. In fact, this mass transfer is often the limiting step of the overall process. This is even more true for extraction processes, in which mass transfer is the core process step to be performed. Therefore, detailed and fundamental quantitative knowledge on the local mass transfer across fluid interfaces is of utmost importance for process control and intensification. Besides external operating conditions which can be used to influence, say, the size and shape of bubbles or droplets, the flow conditions, pressure and temperature, small-scale interfacial phenomena can have a significant impact on the mass transfer rates. In particular, it is observed in many applications and experiments that surface active substances (so-called surfactants) are present, as impurities in contaminated systems or as additives, brought intentionally into the fluid system in order to change certain properties (see, e.g., [ 46 , 15 , 49 , 44 ] ) or being an educt or product in a chemical reaction network. Let us note in passing that even certain fluorescence tracers used for local concentration measurements turn out to be surface active, thus influencing the process that is to be monitored [ 62 ] . Surfactants adsorb to the fluid interface, changing its interfacial free energy and interfacial tension. Even at very small surfactant concentrations in the range of a few ppm or less within the bulk, their interfacial concentration will typically be large and lead to significant changes in the macroscopic system behavior; see [ 51 ] for a review. A classical example is the strong impact of surface active substances on the rise velocity of bubbles in aqueous systems, slowing them down considerably. Adsorption of surfactant strongly influences the transfer rates of, e.g., gaseous components into a liquid phase. It is commonly accepted that there are two different ways in how this influence is mediated. First, since surfactant is inhomogeneously distributed along the interface, the interfacial tension displays non-zero surface gradients. This induces so-called Marangoni stresses which act as tangential forces at the interface, thus changing the flow field locally, resulting for instance in the above mentioned deceleration of a rising bubble; cf. [ 45 ] . This in turn alters the ratio between diffusive and convective transport time scales, changing the diffusive mass transfer fluxes at the interface. Experimental results on the influence of Marangoni stress on mass transfer are reported, e.g., in [ 4 , 25 , 36 , 33 , 43 ] . Second, even in the absence of fluid flow, the partial coverage of the interface with surfactant molecules constitutes a barrier against the passage of other molecules across the interface. This leads to an additional hindrance effect, also referred to as mass transfer resistance, sometimes also referred to as a steric effect. Experimental results on this hindrance effect can be found, e.g., in [ 47 , 29 , 5 , 31 , 32 ] . Let us note that, similar to mass transfer, the rate of evaporation is influenced by the presence of surfactants [ 40 , 8 ] . Already in [ 40 ] , Langmuir introduced an energy barrier model to explain this phenomenon, at least qualitatively. Despite this classical work, how to derive and incorporate a local barrier/hindrance effect in a thermodynamically consistent way within a rigorous continuum physical framework has been an open question until recently. In fact, a complete and thermodynamically consistent model has been introduced in [ 10 ] , and the main aim of the present paper is to provide an experimental validation of this novel mass transfer model.