Laser injection locking and nanophotonic spectral translation of electro-optic frequency combs

Roy Zektzer, Ashish Chanana, Xiyuan Lu, David A. Long, Kartik Srinivasan · 2025

Read Laser injection locking and nanophotonic spectral translation of electro-optic frequency combs by Roy Zektzer, Ashish Chanana, Xiyuan Lu, David A. Long, Kartik Srinivasan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-21746.txt.

Introduction

Roy Zektzer and four co-authors boosted electro-optic frequency combs in two thousand twenty-five by injection locking cheap laser diodes to the comb. Such combs, with up to millions of teeth, serve precision spectroscopy and quantum sensors, but weak signal and missing parts at many wavelengths hold them back. Their trick locks a commercial Fabry-Perot diode to the comb teeth.

Locking held across more than a million teeth at injected powers as low as a nanowatt, yielding a clean comb copy. Against a standard optical amplifier, locking gave about a hundredfold better signal at low input. Paired with a nanophotonic wavelength shifter, it widened the usable range of the comb greatly.

Catalog record

CREATORRoy Zektzer, Ashish Chanana, Xiyuan Lu, David A. Long, Kartik Srinivasan
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-21746

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Laser injection locking and nanophotonic spectral translation of electro-optic frequency combs Roy Zektzer, Ashish Chanana, Xiyuan Lu, David A. Long, Kartik Srinivasan Abstract High-resolution electro-optic frequency combs (EO combs) consisting of thousands to millions of comb teeth across a bandwidth between 1 GHz to 500 GHz are powerful tools for atomic, molecular, and cavity-based spectroscopy, including in the context of deployable quantum sensors. However, achieving sufficiently high signal-to-noise ratio (SNR) EO combs for use across the broad range of wavelengths required in the aforementioned applications is hindered by the corresponding unavailability of relevant components such as narrow-linewidth lasers, electro-optic phase modulators with adequate optical power handling, and low-noise optical amplifiers. Here, we address the latter two points by showing that optical injection locking of commercial Fabry-Perot (FP) laser diodes can help enable high SNR EO combs. We injection lock the FP laser diode to more than 10 6 comb teeth at injected comb powers as low as 1 nW and produce a high SNR replica of the EO comb. In comparison to a commercial semiconductor optical amplifier, injection locking achieves ≈ \approx 100 × \times greater SNR for the same input power (when < < 1 μ \mu W) and equal SNR for > 35 × >35\times lower input power. Such low-power injection locking is of particular relevance in conjunction with nanophotonic spectral translation, which extends the range of wavelengths available for EO combs. We show that the usable wavelength range of an EO comb produced by photo-induced second harmonic generation of an EO comb in a silicon nitride resonator is significantly increased when combined with optical injection locking. Our results demonstrate that optical injection locking provides a versatile and high-performance approach to addressing many different scenarios in which EO comb SNR would be otherwise limited. I Introduction Optical frequency combs have had a tremendous impact by offering a coherent link between optical and microwave frequencies Comb_revDiddams2020 ; Comb_revFortier2019 and enabling applications such as optical atomic clocks Atomic_clock_Diddams2001 , laser ranging Lidar_Lukashchuk2022 , and spectroscopy Sensing_dual_Giorgetta2024 . In recent years, significant efforts have been made to transition combs from the optical table into real-world applications, and even onto chip-scale platforms Integrated_combs_Chang2022 . Efforts in this direction include the development of frequency combs based on chip-integrated Kerr nonlinear optics microCombrev_Kippenberg2011 and electro-optics Int_Eo_Hu2022 ; Int_EO_Han2024 ; Int_Eo_Zhang2019 ; Int_Eo_Zhang2023 . For sensing and spectroscopy applications (Fig. 1 (a)), electro-optic (EO) combs produced by modulation of continuous-wave lasers EO_comb_rev_Parriaux2020 ; EoCombs_rev_Zhuang2023 are especially interesting as they allow for frequency agile, digitally controlled repetition rates and spans. This enables spectral and temporal resolution that can be tailored to meet the requirements of different materials and applications. For example, EO combs have been used in molecular spectroscopy from the ultraviolet to the mid-infrared spectral regions EO_comb_rev_Parriaux2020 ; EoCombs_rev_Zhuang2023 , allowing for time resolution as fast as 20 ns ns_res_Long2023 . The mutual coherence of the comb teeth further enables measurement of ultra-narrow (e.g., <1 kHz) spectroscopic features such as those encountered in atomic physics long_electro-optic_2019 , allowing application to quantum sensors, as shown in recent demonstrations with Rydberg electrometry rydberg_combPrajapati2024 ; Dixon2023 ; rydberg_combArtusio2024 . Figure 1: Applications and challenges to high signal-to-noise ratio electro-optic (EO) combs, and our proposed solution using optical injection locking. (a) Current applications of EO combs extend across a wide range of wavelengths from mid-infrared to ultraviolet. These applications include mid-infrared gas spectroscopy ns_res_Long2023 , laser detection and ranging (LIDAR) he_massively_2023 (automobiles: 1550/905 nm, atmosphere: 1064 nm, and underwater: 532 nm), quantum sensing based on cold atoms and atomic vapors rydberg_combPrajapati2024 ; Dixon2023 , and spectroscopy of biological systems. There are several major technical challenges to high signal-to-noise ratio operation, from the generation of the comb using a narrow-linewidth laser and electro-optic modulator, to frequency conversion of the comb from the laser wavelengths to a target operating wavelength (for example, using periodically poled lithium niobate (PPLN)), as well as laser damage of both devices (e.g., modulator photorefractive damage) and samples. (b) We propose to address these challenges by using optical injection locking (OIL) of Fabry-Perot laser diode(s) to low-power EO combs (left dashed box). This results in a high signal-to-noise ratio EO comb while reducing the optical power at the comb generation step, which limits the requirements on the seed laser and modulator. Moreover, when used after nonlinear spectral translation (right dashed box), it can effectively enhance its conversion efficiency. Considering the variety of applications they impact, there is a strong need for EO combs across a wide range of wavelengths (e.g., ultraviolet to near-infrared) with sufficient power for high signal-to-noise ratio (SNR) measurements. As described below, this presents a significant challenge, particularly at wavelengths outside of the telecommunications (telecom) bands, which contain the most compelling spectroscopic targets but where EO technology is far less mature. Here, we demonstrate that optical injection locking (OIL) Liu2020 of a Fabry-Pérot (FP) laser diode by an EO comb is a versatile tool for addressing SNR challenges in EO comb spectroscopy systems. In contrast to previous approaches where FP laser diode injection locking was seeded by individual comb teeth fukushima_optoelectronic_2003 ; zhang_high-coherence_2024 , here we injection lock a single FP laser diode with the entirety of the EO comb that is comprised of up to two million comb teeth across a span of 2 GHz. High signal-to-noise ratio output combs are created with total injected comb power as low as 1 nW, corresponding to 0.4 pW per comb tooth on average. In comparison to using a semiconductor optical amplifier (SOA) to boost the EO comb power, we achieve >100\times higher SNR for the same input power of < 1 \mu W. Finally, to showcase how our approach naturally dovetails with techniques to extend wavelength access, we combine EO comb spectral translation and OIL. We use doubly-resonant, photo-induced second harmonic generation (SHG) and sum-frequency generation (SFG) in a silicon nitride (Si 3 N 4 ) microring resonator (MRR) Lu2021 ; nitiss_optically_2022 to translate a telecom (1560 nm) comb to 780 nm and injection-locked a FP diode to the translated comb. The ability to OIL with low-power combs allowed us to expand the effective wavelength range over which the SHG combs are usable, to include wavelengths where the SHG process produces <5 nW of optical power. II Motivation Generating EO combs that enable high SNR measurements across a broad range of wavelengths involves several considerations to meet the wide range of potential applications shown in Fig. 1 (a). Typically, a continuous-wave laser source and EO modulator are needed for each wavelength band of interest. While the linear EO effect in commonly used materials like lithium niobate is inherently broadband, accompanying effects such as photorefraction can result in pronounced power handling limitations at short wavelengths damage_Hall1985 , necessitating studies of alternate materials Kabessa2015 . Thus, even if low-noise laser sources with higher power are available (Fig. 1 (a)-\small{1}⃝), the generation of EO combs with adequate power can be challenging (Fig. 1 (a)-\small{2}⃝). A potential solution is to amplify a relatively low-power EO comb. While this is straightforward at some wavelengths (e.g., in the telecom where low-noise erbium-doped fiber amplifiers are available), it is far more difficult or not presently possible at many other wavelengths. Spectral translation

Read the complete text