Diffusion of intruders in a granular gas thermostatted by a bath of elastic hard spheres
R \ls U \ls B \ls É \ls N \ls \ns G \ls Ó \ls M \ls E \ls Z G \ls O \ls N \ls Z \ls Á \ls L \ls E \ls Z \ls 1 and V \ls I \ls C \ls E \ls N \ls T \ls E \ls \ns G \ls A \ls R \ls Z \ls Ó \ls 2 · 2025
Read Diffusion of intruders in a granular gas thermostatted by a bath of elastic hard spheres by R \ls U \ls B \ls É \ls N \ls \ns G \ls Ó \ls M \ls E \ls Z G \ls O \ls N \ls Z \ls Á \ls L \ls E \ls Z \ls 1 and V \ls I \ls C \ls E \ls N \ls T \ls E \ls \ns G \ls A \ls R \ls Z \ls Ó \ls 2 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-21441.txt.
Introduction
Rubén Gómez González and Vicente Garzó present a 2025 arXiv paper on how stray particles spread through a heated granular gas. The granular gas and its intruders sit inside a bath of elastic spheres held at fixed warmth, and collisions drain energy unevenly. The team works from the Boltzmann kinetic equation, comparing theory with Monte Carlo runs.
Near the steady state, the intruder temperature settles apart from the bath temperature, and the theory matched simulations well. A Chapman-Enskog expansion then yields the diffusion coefficients as tangled functions of mass and size ratios, bounce loss, and bath warmth. As one check, an older suspension model falls out in a heavy-particle limit.
Catalog record
| CREATOR | R \ls U \ls B \ls É \ls N \ls \ns G \ls Ó \ls M \ls E \ls Z G \ls O \ls N \ls Z \ls Á \ls L \ls E \ls Z \ls 1 and V \ls I \ls C \ls E \ls N \ls T \ls E \ls \ns G \ls A \ls R \ls Z \ls Ó \ls 2 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 126 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-21441
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Diffusion of intruders in a granular gas thermostatted by a bath of elastic hard spheres R \ls U \ls B \ls É \ls N \ls \ns G \ls Ó \ls M \ls E \ls Z G \ls O \ls N \ls Z \ls Á \ls L \ls E \ls Z \ls 1 and V \ls I \ls C \ls E \ls N \ls T \ls E \ls \ns G \ls A \ls R \ls Z \ls Ó \ls 2 Abstract The Boltzmann kinetic equation is considered to compute the transport coefficients associated with the mass flux of intruders in a granular gas. Intruders and granular gas are immersed in a gas of elastic hard spheres (molecular gas). We assume that the granular particles are sufficiently rarefied so that the state of the molecular gas is not affected by the presence of the granular gas. Thus, the gas of elastic hard spheres can be considered as a thermostat (or bath) at a fixed temperature T g T_{g} . In the absence of spatial gradients, the system achieves a steady state where the temperature of the granular gas T T differs from that of the intruders T 0 T_{0} (energy nonequipartition). Approximate theoretical predictions for the temperature ratio T 0 / T g T_{0}/T_{g} and the kurtosis c 0 c_{0} associated with the intruders compare very well with Monte Carlo simulations for conditions of practical interest. For states close to the steady homogeneous state, the Boltzmann equation for the intruders is solved by means of the Chapman–Enskog method to first order in the spatial gradients. As expected, the diffusion transport coefficients are given in terms of the solutions of a set of coupled linear integral equations which are approximately solved by considering the first-Sonine approximation. In dimensionless form, the transport coefficients are nonlinear functions of the mass and diameter ratios, the coefficients of restitution, and the (reduced) bath temperature. Interestingly, previous results derived from a suspension model based on an effective fluid-solid interaction force are recovered when m / m g → ∞ m/m_{g}\to\infty and m 0 / m g → ∞ m_{0}/m_{g}\to\infty , where m m , m 0 m_{0} , and m g m_{g} are the masses of the granular, intruders, and molecular gas particle, respectively. Finally, as an application of our results, thermal diffusion segregation is exhaustively analysed. † † affiliation: 1 Departamento de Didáctica de las Ciencias Experimentales y las Matemáticas, Universidad de Extremadura, E-10004 Cáceres, Spain 2 Departamento de Física, Instituto Universitario de Computación Científica Avanzada (ICCAEx), Universidad de Extremadura, Avda. de Elvas s/n, 06006 Badajoz (Spain). August 24, 2026 1 Introduction One of the most relevant characteristics of granular systems is that they are constituted by macroscopic particles (or grains) that collide inelastically among themselves. Due to this fact, the kinetic energy of the system decreases over time. Thus, to observe sustained diffusive motion of the grains, an external energy input is usually introduced to compensate for the energy lost by collisions and reach a nonequilibrium steady state. Several mechanisms are used to inject energy at the system in the real experiments, e.g., mechanical-boundary shaking Yang et al. (2002) ; Huan et al. (2004) , bulk driving [as in air-fluidized beds Schröter et al. (2005) ; Abate & Durian (2006) ], or magnetic forces Sack et al. (2013) ; Harth et al. (2018) . However, since in most of the experimental realizations the formation of large spatial gradients in the bulk region goes beyond the Navier–Stokes domain, it is quite difficult to provide a rigorous theoretical treatment of these sort of situations. In computer simulations, the above obstacle can be circumvented by the introduction of external forces (or thermostats) Evans & Morriss (1990) that heat the system and compensate for the energy dissipated by collisions. Unfortunately, it is not clear so far the relation between each specific type of thermostat with experiments. A more realistic example of thermostated granular systems consists of a set of solid particles immersed in an interstitial fluid of molecular particles. This provides a suitable starting point to mimic the behaviour of real suspensions. Needless to say, the understanding of the flow of solid particles in one or more fluid phases is in fact a quite intricate problem. Among the different types of multiphase flows, a simple but interesting set corresponds to the so-called particle laden-suspensions Subramaniam (2020) . In this sort of suspension, a set of small and dilute particles are immersed in a carrier fluid (such as water or air). When the dynamics of grains in gas-solid flows are essentially dominated by collisions, the extension of the conventional kinetic theory of gases Chapman & Cowling (1970) ; Ferziger & Kaper (1972) to dissipative dynamics can be considered as a reliable tool to describe this sort of systems. However, at a kinetic level, the description of flows involving two or more phases is really a complex problem since one should start from a set of kinetic equations for each one of the velocity distribution functions of the different phases. In addition, the different phases evolve over quite different spatial and temporal scales. Due to these difficulties, a coarse-grained approach is usually adopted and the influence of gas-phase effects on the dynamics of solid particles is incorporated in the starting kinetic equation in an effective way by means of a fluid-solid interaction force Koch (1990) ; Gidaspow (1994) ; Jackson (2000) . In some cases, a Stokes linear drag law for gas-solid interactions is only accounted for Louge et al. (1991) ; Tsao & Koch (1995) ; Sangani et al. (1996) ; Wylie et al. (2009) ; Heussinger (2013) ; Wang et al. (2014) ; Chamorro et al. (2015) ; Saha & Alam (2017) ; Alam et al. (2019) ; Saha & Alam (2020) ; Chassagne et al. (2023) . Other models include an additional Langevin stochastic term Garzó et al. (2012) ; Hayakawa et al. (2017) ; Gómez González & Garzó (2019) ; Gómez González et al. (2020) ; Garzó (2023) . Although the effective suspension models based on the Langevin-like equation provides a reliable way of capturing the impact of gas-phase on the dynamic properties of grains, it could be convenient from a more fundamental point of view to begin with a model that accounts for the effect of the (real) collisions between solid and gas particles. In this context, inspired in a paper reported by Biben et al. (2002) a recent (discrete) suspension model has been recently proposed Gómez González & Garzó (2022b) . As in the case of the most effective models reported in the granular literature Louge et al. (1991) ; Tsao & Koch (1995) ; Sangani et al. (1996) ; Wylie et al. (2009) ; Garzó et al. (2012) ; Heussinger (2013) ; Wang et al. (2014) ; Chamorro et al. (2015) ; Hayakawa et al. (2017) ; Saha & Alam (2017) ; Alam et al. (2019) ; Saha & Alam (2020) ; Gómez González & Garzó (2019) ; Gómez González et al. (2020) , the model is based on the following assumptions. First, one assumes that the granular particles are sufficiently dilute so that the state of the interstitial gas is not affected by the