BACKGAMMON: A Scheme for Producing High Intensity Muon Beams for Future Colliders and Other Applications
Armen Apyan · 2025
Read BACKGAMMON: A Scheme for Producing High Intensity Muon Beams for Future Colliders and Other Applications by Armen Apyan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-21271.txt.
Introduction
Six researchers present a scheme to make intense muon beams in a 2025 paper. Muons are heavy cousins of the electron, and bright muon beams could power a future muon collider. Their scheme, named BACKGAMMON, makes muons by scattering gamma rays off nucleons.
The name spells out the trick: backscattered gammas on nucleons. Existing machines could host the setup, the team argues. They walk through how it would run at the Electron-Ion Collider at Brookhaven, a facility now being built in the United States. Uses beyond colliders are also in view, from materials probes to muon based imaging.
Catalog record
| CREATOR | Armen Apyan |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 17 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-21271
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
BACKGAMMON: A Scheme for Producing High Intensity Muon Beams for Future Colliders and Other Applications Armen Apyan Abstract We present a scheme for producing intense μ + \mu^{+} and μ − \mu^{-} lepton beams that could be utilized in a future muon-muon or muon-ion collider, as well as for other applications. The scheme makes use of BACKscattered GAMMas On Nucleons (BACKGAMMON). Current accelerator infrastructures could be utilized to produce the muon beams, such as the Electron-Ion Collider (EIC) at Brookhaven National Laboratory in the United States. We discuss the implementation of BACKGAMMON at the EIC. a A. Alikhanyan National Laboratory, 0036 Yerevan, Armenia b University of Central Florida, CREOL, The College of Optics and Photonics, 4304 Scorpius Street, Orlando, Florida, 32816, USA c Michigan State University, Facility for Rare Isotope Beams, 640 South Shaw Lane, East Lansing, Michigan, 48824, USA d University of Hawaii at Mānoa, Department of Physics and Astronomy, 2505 Correa Road, Honolulu, Hawaii, 96822 , USA e TriSEED Consultants, LLC, Hillsborough, North Carolina, 27278, USA ∗ Corresponding author. Email addresses: [email protected] (A. Apyan), [email protected] (P. Delfyett), [email protected] (P. Guèye), [email protected] (L. Harris), [email protected] (S. Lo Amar), [email protected] (S. Mtingwa). Introduction There has been growing interest in high intensity muon beams for a variety of applications, such as a muon-muon collider [ 1 ] , or perhaps a muon-ion collider at Brookhaven National Laboratory in the United States [ 2 , 3 ] . One approach being studied uses a proton driver, which employs an intense proton beam that impinges upon a target, such as graphite, thereby producing pions, which decay into \sim 10^{14} muons/s [ 4 ] . An alternative approach, called the Gamma Factory , uses high energy photons resulting from resonant backscattering of laser photons off atomic beams of partially stripped ions circulating in CERN’s Large Hadron Collider storage rings [ 5 ] . The high energy photons in turn strike a graphite target to produce pions whose decay should also be able to achieve \sim 10^{14} muons/s. Yet another approach, called BACKscattered GAMMas On Nucleons (BACKGAMMON) [ 6 ] , and which we present here, uses high energy photons, which are derived from Compton backscattered laser pulses from an intense electron beam, that similarly impinge upon a stationary target to produce pions, which decay into \sim 10^{14} muons/s. In the latter approach, it may be possible to utilize an existing infrastructure as the electron source, such as the electron storage ring at Brookhaven National Laboratory’s Electron-Ion Collider in the United States. This could be the next phase of research at that facility. As for BACKGAMMON, it was proposed some time ago as a scheme for scattering ultra high energy backscattered photons on targets for a variety of studies, including CP violation in B-meson decay [ 6 ] , polarized \tau decay [ 7 ] , and various other applications to heavy flavor physics [ 8 ] . Backscattered Photon Energy The analysis of the electron-photon scattering is considered in the laboratory frame, wherein both the electron and low energy laser photon beams are propagating in opposite directions. For an excellent discussion, see Ref. [ 9 ] . The general case is depicted in Fig. 1, where p_{1},k_{1},k_{2} are the 4-momenta of the incident electron, incident photon, and outgoing scattered photon, respective; and \phi_{1} is the angle between the incident directions of the electron and photon beams, \phi_{2} is the angle between the incident electron and scattered photon beams, and \theta is the angle between the incident and scattered photon directions. Fig. 1. Schematic of Compton Backscattering For our case, the photon beam is backscattered with \theta\sim\pi , and the resulting high energy backscattered photon beam is confined within a cone of opening angle \sim\dfrac{1}{\gamma} relative to the electron’s incident direction of motion, with \gamma being the usual Lorentz contraction factor for the electron beam. We take the incident electron to have energy E_{e} and incident photon to have energy \omega_{1} , with the electron rest energy being E_{0} . The scattered photon energy \omega_{2} is given by \omega_{2}=\frac{\omega_{1}(1-\beta\cos\phi_{1})}{1-\beta\cos\phi_{2}+\dfrac{\omega_{1}}{E_{e}}(1-\cos\theta)}\,\,, (1) where as usual, \beta=\dfrac{v}{c} ; When \omega_{1}<<E_{e} , as in our case, we have the approximation \omega_{2}\approx\frac{4\gamma^{2}\omega_{1}}{1+4\gamma^{2}\dfrac{\omega_{1}}{E_{e}}}\,\,. (2) Unpolarized Total Cross Section Following Landau, Lifshitz, Berestetskii and Pitaevskii [ 10 ] , we set x_{1}=2\gamma\frac{\omega_{1}}{E_{0}}(1-\beta\cos\phi_{1}). (3) The total unpolarized Compton cross section \sigma_{C}^{unp} is then \sigma_{C}^{unp}=2\pi r_{0}^{2}\frac{1}{x_{1}}[(1-\frac{4}{x_{1}}-\frac{8}{x_{1}^{2}})\ln(1+x_{1})+\frac{1}{2}+\frac{8}{x_{1}}-\frac{1}{2(1+x_{1})^{2})}], (4) where r_{0}=2.81794\times 10^{-15} m is the classical electron radius. Total Cross Section with Polarization Included To include polarization effects, one write can write [ 11 ] \sigma_{C}=\sigma_{C}^{unp}+2\lambda_{e}P_{c}\sigma_{1}, (5) where \lambda_{e} is the mean electron helicity (|\lambda_{e}|\leq\dfrac{1}{2}) , P_{c} is the Stokes parameter that gives the degree of photon circular polarization given by P_{c}=\frac{(I_{L}-I_{R})}{I_{0}}, (6) with I_{L} , I_{R} , and I_{0} being the left circularly polarized, right circularly polarized, and total photon intensities. Finally, \sigma_{1}=\frac{2\sigma_{0}}{x_{1}}[(1+\frac{2}{x_{1}})\log(1+x_{1})-\frac{5}{2}+\frac{1}{1+x_{1}}-\frac{1}{2(1+x_{1})^{2}}] (7) with \sigma_{0}=\pi(\dfrac{e^{2}}{m_{e}c^{2}})=2.5\times 10^{-29}\,\mbox{m}^{2} . Luminosity of Electron-Photon Collisions We use the Suzuki formula [ 12 ] , where the luminosity L=N_{e}N_{ph}f\frac{\cos(\dfrac{\phi}{2})}{2\pi}\frac{1}{\sqrt{(\sigma^{2}_{ye}+\sigma^{2}_{yph}}\sqrt{(\sigma^{2}_{xe}+\sigma^{2}_{xph})\cos^{2}(\dfrac{\phi}{2})+(\sigma^{2}_{ze}+\sigma^{2}_{zph})\sin^{2}(\dfrac{\phi}{2})}}, (8) where N_{e} is the number of electrons in a bunch, N_{ph} is the numbers of photons in a laser pulse, f is the electron-photon bunch collision frequency, \phi is the crossing angle of the lines defined by the incident electron and photon momenta, and the \sigma ’s define the rms sizes of electron and photon beam dimensions at the interaction point, with z being the longitudinal direction according to Suzuki’s notation. The electron rms beam sizes are given by the Electron-Ion Collider (EIC) Design parameters [ 13 ] , the laser pulse transverse sizes are taken to correspond to those of the electron bunches, while the laser pulse length is defined by the laser system discussed below. From the luminosity L , the rate R of backscattered photons is given by R\equiv\frac{dN}{dt}=\sigma_{C}L, (9) where N is the number of backscattered photons. Laser Parameters The frequency f at which electron bunches come into the interaction point with the laser pulses is equal to the number of electron bunches in the storage ring (1,160) times the revolution frequency of the electrons around the circumference (3,833.94 meters), or f=\beta c\frac{1160}{3833.94}=90.7\,\,\mbox{MHz}\,. (10) Müller et al. have reported developing a laser system centered at 1046 nm wavelength \lambda , 254 fs pulse duration, 80 MHz pulse repetition rate, and 10.4 kW average output power P [ 14 ] . We note that this is not quite at the 90.7 MHz repetition rate of the electron bunches at the EIC; however, they are close enough that we take the repetition rate of both the electron bunches and laser pulses to be 90.7 MHz. For this laser system, the energy per laser pulse is 114.657 \mu J and the number of incident photons per pulse is 6.03\times 10^{14} . The authors report that the average power can be pushed to 100 kW, which would increase the number of photons per pulse by an order of magnitude. Rate of Backscattered Photons Table 1 contains updated EIC parameters and the laser system modified to 90.7 MHz pulse rep rate. Table 1. Input Parameters N_{e} N_{ph} E_{e} \omega_{1} \phi_{1} \phi_{2} \theta \phi 1.72\times 10^{11} 6.03\times 10^{14} 4.5 GeV 1.19 eV \pi 0 \pi 0 \lambda_{e} P_{c} \epsilon_{x} \epsilon_{y} \beta^{\ast}_{x} \beta^{\ast}_{y} f \frac{1}{2} 1 20 nm 1.2 nm 1 cm