Multipolar Angular Scattering of Substrated Metasurfaces

Hossein Allahverdizadeh, Karim Achouri · 2025

Read Multipolar Angular Scattering of Substrated Metasurfaces by Hossein Allahverdizadeh, Karim Achouri (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-20724.txt.

Introduction

Hossein Allahverdizadeh and Karim Achouri write the math for how a patterned surface scatters light from any angle, on any backing. Metasurface modeling breaks down when neighbor coupling, multipole effects, or a substrate enter, and older tools assumed head-on light in a uniform medium. Their formalism lifts all three limits at once. An exact spherical multipole expansion, carried to octupole order, handles toroidal effects for free.

Unequal media above and below the sheet are built into the scattering bookkeeping. Test surfaces, dielectric and plasmonic, matched full-wave simulations closely, including sharp bound states in the continuum. Designers gain a fast, trustworthy predictor.

Catalog record

CREATORHossein Allahverdizadeh, Karim Achouri
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE93 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-20724

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multipolar Angular Scattering of Substrated Metasurfaces Hossein Allahverdizadeh, Karim Achouri Abstract Properly modeling and predicting the scattering response of a metasurface is a particularly challenging task. This has been shown to be especially difficult if the metasurface supports both local and nonlocal interactions, in the form of lattice coupling effects, multipolar contributions or bianisotropic responses. So far, existing methods to approach this problem have been restricted to normal incidence in a homogeneous background medium. We overcome these limitations by providing a rigorous and comprehensive formalism that accommodates both oblique incidence and the presence of different superstrate and substrate. This is achieved by extending our existing metasurface modeling framework to account for nonlocal and multipolar contributions up to the octupolar order and properly accounting for the scattering effects due to an inhomogeneous background medium. Additionally, our method is based on exact spherical multipole decomposition, which intrinsically accounts for toroidal contributions. We demonstrate the effectiveness of our approach by modeling the response of several dielectric and plasmonic metasurfaces that exhibit sharp spectral features including bound states in the continuum. Overall, our formalism yields excellent agreement with full-wave simulations. keywords Metasurfaces,oblique scattering, substrated metasurface, angular scattering, higher-order multipoles † † email: [email protected] † † email: [email protected] † † affiliation: Institute of Electrical and Microengineering, École Polytechnique Fédérale de Lausanne (EPFL), Laboratory for Advanced Electromagnetics and Photonics, Lausanne, Switzerland 1 Introduction Metasurfaces are planar arrays of subwavelength resonant unit cells that have evolved into a powerful platform for manipulating electromagnetic waves through careful design. A plethora of works have already shown that metasurfaces can independently control amplitude, phase, polarization, frequency, and momentum, enabling a vast array of applications Li et al. (2023) ; Lin et al. (2014) ; Achouri and Caloz (2021) . In addition, manipulating intrinsic resonances of single scatters alongside lattice coupling effects, allows us to engineer multi-resonant responses, supporting broadband and efficient wavefront manipulation Kim et al. (2024) . These developments highlight the versatility of metasurfaces in the fields of photonics and electromagnetics. Besides their temporal spectral control, metasurfaces can also exhibit spatially nonlocal responses, meaning that their behavior depends not only on the local fields at each point but also on the angle of incidence or the transverse wavevector of the incoming wave Simovskij (2018) . As a consequence, nonlocal metasurfaces can distinguish between different momentum components of an incident wave Pfeiffer and Grbic (2013) ; Silveirinha (2014) ; Zhou et al. (2020) ; Achouri and Martin (2020) , and support highly angle-selective resonances. This enables applications like angular filtering, vortex mode selection and generation Achouri et al. (2015) ; Achouri and Caloz (2021) , or the realization of bound states in the continuum (BIC) Zhen et al. (2014) ; Doeleman (2018) . They can also be used to achieve generalized Kerker effects at oblique incidence, a concept which is often only considered for normally incident waves Shamkhi et al. (2019) . On the other hand, nonlocal metasurfaces may also be used to realize angle-independent responses Yücel et al. (2024) , demonstrating that nonlocality does not only increase angular dispersion but may also be used to completely suppress it. This ability to engineer a metasurface angular scattering response becomes especially important when metasurfaces are designed to work under wide-angle illumination, where modal interference and guided-mode resonances strongly depend on the angle. By engineering the nonlocality of metasurfaces, we can thus realize complex angular responses. This enables a powerful approach for realizing applications such as beam steering, diffraction channel control Gong et al. (2023) ; Liu and Miroshnichenko (2017) , or signal modulation across multiple channels Momeni et al. (2019) ; Abdolali et al. (2019) , and multiplexing Jang et al. (2021) which are important in free-space communication, optical computing, and photonic devices. To understand and design metasurfaces, multipolar decomposition-based modal analysis has become a key method. It gives deep physical insight by identifying which electric or magnetic multipoles contribute and how they interfere to form the overall metasurface scattering response. This has been widely studied, from single particle responses to collective lattice effects Alaee et al. (2018) ; Allayarov et al. (2024) ; Rahimzadegan et al. (2022) ; Babicheva and Evlyukhin (2017) . One of the ongoing challenges in these methods is the correct identification and treatment of transverse contributions, especially when the illumination breaks in-plane symmetry (in the cases of oblique incidence) or when the metasurface is placed in an inhomogeneous environment (e.g., on a substrate). For these reasons, most existing techniques have been restricted to the case where the metasurface is illuminated at normal incidence and is placed inside a homogeneous medium Savinov et al. (2014) ; Babicheva and Evlyukhin (2017) ; Allayarov et al. (2024) or to the case where the metasurface is only modeled with dipolar responses Albooyeh et al. (2011) ; Achouri and Martin (2020) ; Cuesta and Achouri (2025) . Additionally, when the presence of a substrate and/or oblique incidence is considered, the field inside the structure may include multipolar contributions with more complex angular behavior, including higher-order or mixed-parity modes, which are hard to isolate using primitive or irreducible Cartesian multipoles. In such situations, exact spherical multipoles are needed Nanz (2016) . But interpreting effects in metasurface responses that account for transverse modes under oblique incidence emerging from exact spherical multipoles has been difficult Prokhorov et al. (2022) . To deal with these issues, we propose a general framework using exact spherical multipole expansions together with the Generalized Sheet Transition Conditions (GSTC) Achouri et al. (2015) ; Achouri and Caloz (2021) ; Achouri et al. (2023) . This approach brings two main advantages. First, the spherical basis naturally provides a complete and orthogonal set of multipolar moments. Second, by using the GSTC, we reduce the problem to surface current distributions, avoiding the need to solve for volumetric field profiles Achouri and Caloz (2021) . This becomes especially useful in practical metasurfaces with substrates or even multilayers provided that they are subwavelength. We also show that this method works even in cases with BIC, where the leakage is highly angle selective and the Q factors are extremely high Hsu et al. (2016) ; Zhen et al. (2014) . In this paper, we start by reviewing the exact formulation of spherical multipoles, from a single particle to a periodic metasurface under normal incidence, as shown in Fig. 1 a,b. Then, we derive an equivalent surface current representation of the metasurface, including up to octupolar moments. Then, using the GSTC, we calculate the co-polarized oblique reflection and transmission coefficients for TE and TM waves, accounting for different substrate and superstrate materials, as suggested in Fig. 1 c. To validate the robustness of our model, we consider several examples. We start by using our method to predict the TE and TM scattering coefficients for oblique incidence of metasurfaces made out of dispersive materials and embedded in free space. These predictions are then compared to full-wave simulations to asses their agreement. Then, we will examine configurations involving dielectric substrates and investigate the impact of the spatial origin of the equivalent surface current distribution since, in the presence of a substrate, which breaks normal mirror symmetry, it is not straightforward to know where the latter should be placed Kildishev

Read the complete text