Deterministic Formation of Single Organic Color Centers in Single-Walled Carbon Nanotubes
Daichi Kozawa, Yuto Shiota, Yuichiro K. Kato · 2025
Read Deterministic Formation of Single Organic Color Centers in Single-Walled Carbon Nanotubes by Daichi Kozawa, Yuto Shiota, Yuichiro K. Kato (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-20402.txt.
Introduction
Daichi Kozawa and co-authors place single glowing defects inside carbon nanotubes exactly where they want them, in a 2025 paper. Nanotubes fitted with organic color centers can emit single photons, a resource for quantum technology. Forming those centers used to be a matter of chance, with no control over number or position. Their method uses light-driven chemistry watched live as it happens.
Each new center announces itself as a discrete step in the tube's glow. Stopping the reaction at the first step yields exactly one center. Imaging confirmed centers form at chosen positions along the tube. Tests showed the emitted light arrives one photon at a time, proving its quantum character. Atomically defined emitters move closer to practical devices.
Catalog record
| CREATOR | Daichi Kozawa, Yuto Shiota, Yuichiro K. Kato |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 22 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-20402
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Deterministic Formation of Single Organic Color Centers in Single-Walled Carbon Nanotubes Daichi Kozawa, Yuto Shiota, Yuichiro K. Kato Abstract Quantum light sources using single-walled carbon nanotubes show promise for quantum technologies but face challenges in achieving precise control over color center formation. Here we present a novel technique for deterministic creation of single organic color centers in carbon nanotubes using in-situ photochemical reaction. By monitoring discrete intensity changes in photoluminescence spectra, we achieve precise control over the formation of individual color centers. Furthermore, our method allows for position-controlled formation of color centers as validated through photoluminescence imaging. We also demonstrate photon antibunching from a color center, confirming the quantum nature of the defects formed. This technique represents a significant step forward in the precise engineering of atomically defined quantum emitters in carbon nanotubes, facilitating their integration into advanced quantum photonic devices and systems. I Introduction Quantum light sources capable of emitting single photons on demand are essential for emerging quantum technologies Aharonovich et al. 2016 , enabling advances in communication Gisin and Thew 2007 , computing Di Ventra and Pershin 2013 , and sensing applications Degen et al. 2017 . Notable developments toward these applications include single-photon emission demonstrated in various solid-state systems such as nitrogen-vacancy centers in diamond Kurtsiefer et al. 2000 , semiconductor quantum dots Michler et al. 2000 , and defects in two-dimensional materials Koperski et al. 2015 ; Kozawa et al. 2023 ; Tran et al. 2016 . Particularly desirable are quantum light sources that operate at room temperature and within the telecom wavelength range He et al. 2017a ; Ishii et al. 2017 , while material limitations and emission efficiency constraints need to be considered. Single-walled carbon nanotubes (SWNTs) have emerged as a promising platform for quantum light sources Ishii et al. 2017 , owing to their unique one-dimensional structure Saito et al. 2000 , exceptional optical properties Avouris et al. 2008 ; Kozawa et al. 2024 , and compatibility with telecom wavelengths Weisman and Bachilo 2003 ; Zaumseil 2022 ; He et al. 2017a ; Ishii et al. 2015 . The introduction of organic color centers in SWNTs has further enabled single-photon emission at room temperature He et al. 2017a with large tunability of the emission energy Kwon et al. 2016 . Nevertheless, one of the critical challenges is the deterministic control over the formation of these quantum defects, particularly the number of defects introduced and their spatial positioning within single carbon nanotubes Dou et al. 2021 ; Huang et al. 2020 . Existing methods often lack the capability or the precision required, limiting their potential for scalable quantum photonic applications Ishii et al. 2018 . In this work, we develop a technique for the deterministic creation of single organic color centers using in-situ photochemical reaction. As nanotubes are functionalized, discrete photoluminescence (PL) intensity changes corresponding to the formation of individual color centers are observed. By stopping the reaction upon detecting the discrete increase, we are able to deterministically create single color centers. Statistical analysis of PL spectra from individual color centers is conducted to obtain quantitative insight into the distribution of color center types. In addition, this technique allows for position-controlled formation of color centers which is validated by PL imaging. Furthermore, we observe photon antibunching from a color center by performing a photon correlation measurement, showing that single quantum defects can be formed using this technique. II Results and discussion Air-suspended SWNTs are grown across trenches on Si substrates by chemical vapor deposition (CVD) Ishii et al. 2015 ; Ishii et al. 2017 ; Ishii et al. 2019 , with the nanotube density carefully controlled via growth parameters to allow for single tube measurements. The substrate is then placed inside a sealed reaction cell, where a droplet of iodobenzene is deposited next to the substrate and left for 10 min to saturate the chamber with vapor. The cell is subsequently mounted on a motorized three-dimensional feedback stage, which enables precise spatial targeting of individual SWNTs. Local functionalization is performed via a vapor-phase photochemical reaction Kozawa et al. 2022 by focusing an ultraviolet (UV) laser through a quartz window onto a selected SWNT (Fig. 1 a). Initially, the UV laser is blocked by a shutter, and PL spectra are acquired over a time period of 5 s using Ti:sapphire laser excitation. At t=0 s, the shutter is opened and UV irradiation begins while PL spectra continue to be recorded. Figure 1: (a) A schematic of an experimental setup for the in-situ functionalization. (b) A time-trace map of PL spectra for a (9,7) SWNT excited with 1.59 eV and 20 µW. (c) Temporal profiles of emission peaks E_{11} and E_{11}^{-} extracted from the time trace (b) by spectrally integrating the intensity with a bin width of 20 meV at each time point. The solid lines are fits by the Gaussian mixture model. The shutter for the UV laser is open after t=0 s in panels (b, c). During the photochemical reaction of a (9,7) SWNT, PL spectra show temporal changes (Fig. 1 b). The pristine nanotube initially exhibits only E_{11} emission, while an additional peak labeled E_{11}^{-} emerges at t=190 s, indicating that functionalization has occurred. Spectral diffusion or broadening of the emission peaks is insignificant in most nanotubes during the reaction, enabling us to focus on the emission intensity for further analysis. We extract temporal profiles of the emission intensity by spectrally integrating the PL spectra of each relevant peak in the time trace map (Fig. 1 c; see Methods for details). Notably, we observe discrete intensity steps in both E_{11} and E_{11}^{-} emission, which can be attributed to the formation of individual organic color centers. For the E_{11} emission, most of these discrete steps correspond to intensity reductions, likely caused by the introduction of color centers or quenching sites. While many of the intensity steps occur synchronously in both E_{11} and E_{11}^{-} , some steps in the E_{11} intensity occur without changes in the E_{11}^{-} intensity, suggesting the formation of quenching sites independent of organic color center formation. The time traces can be well reproduced by the Gaussian mixture model (GMM) Bandyopadhyay and Goldschen-Ohm 2021 , which provides a statistical framework for distinguishing discrete emissive states. We combine GMM with the Akaike information criterion to minimize overfitting while ensuring an accurate representation of the data, allowing for an objective determination of the optimal number of formed color centers. The GMM validates that these steps are not random intensity fluctuations but discrete, quantized transitions, suggesting the individual creation of color centers. Figure 2: (a) A flow chart of the algorithm for a single color center formation. (b) Spectral difference before and after reaction of a (9,7) SWNT. (c) Peak probability densities of the E_{11}^{-} intensity before and after the reaction. The black dotted lines are sum of the Gaussian fit with Eq. 1 , the orange lines are individual Gaussian components, and the vertical gray broken lines indicates 1 \sigma of the intensity distribution before the reaction. The functionalization is conducted with a UV laser power of 5 nW, while PL spectra are taken with an excitation energy of 1.59 eV and a power of 100 µW. The PL intensity is obtained by