Near-Field Collinear Dipole Array Design with Dual-Polarization Operation for Wireless Power Transfer

Jiawang Li 1 · 2025

Read Near-Field Collinear Dipole Array Design with Dual-Polarization Operation for Wireless Power Transfer by Jiawang Li 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-19221.txt.

Introduction

Jiawang Li designed a line of paired antennas to focus wireless power at close range, in a solo paper published in 2025. Large intelligent surfaces are a leading path to improve 6G in low frequency bands. His study lines up dual-polarization antennas in a row and drives them with matched phases. Earlier work on such focusing considered the direct path alone.

With a long row, the focus point on the center line settles at a fixed depth. He grades the width of the focus spot for two wave polarizations and tests slanted and circular foci. A two-ray path, with a reflected twin, makes the model more realistic. Rules for row placement and the focus spot come out of the mathematics. Simulation runs support the plan, and the parts pair with small cross-talk. The work grounds surface-based power beams.

Catalog record

CREATORJiawang Li 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-19221

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Near-Field Collinear Dipole Array Design with Dual-Polarization Operation for Wireless Power Transfer Jiawang Li 1 Abstract A large intelligent surface (LIS) is a promising approach to enhancing 6G performance in sub-10 GHz frequency bands. An analysis of the horizontal dipole linear array reveals that when the array size is sufficiently large, employing the conjugate phase method to excite the antenna elements results in a focal point along the central line of the array that gradually stabilizes at a constant value. The study evaluates the 3dB focal resolution generated by the dipole array for two polarizations. Additionally, the feasibility of generating circularly polarized focal points and the focal displacement under a limited array size are explored. Previous near-field focal synthesis methods primarily considered only the line-of-sight (LOS) channel. To enhance practicality, this study adopts a two-ray channel model to analyze near-field focal synthesis results in the presence of a reflected path. Both two polarizations are discussed separately, with design guidelines provided for array placement and focal point positioning. Finally, electromagnetic simulations are conducted within the linear array to validate the proposed design. These simulations highlight the capability of the horizontal dipole array configuration to be directly applied without significant coupling effects between elements. The proposed design guidelines lay a solid foundation for the application of LIS in 6G technology. \receiveddate XX Month, XXXX \reviseddate XX Month, XXXX \accepteddate XX Month, XXXX \publisheddate XX Month, XXXX \currentdate XX Month, XXXX \doiinfo OJAP.2024.1234567 † † corresponding: CORRESPONDING AUTHOR: Jiawang Li (e-mail: [email protected]). I INTRODUCTION The large intelligent surface (LIS) [1] is an innovative solution poised to meet the demanding requirements of 6G in the sub-10 GHz frequency bands, addressing the constraints of limited spectrum resources. Unlike phased array systems, which are typically analyzed in the far-field [2]-[3], LIS is predominantly deployed in indoor environments and residential areas, comprising numerous antenna elements distributed widely across the space. Therefore, LIS can be regarded as an evolution of the localized massive MIMO concept introduced in 5G. Since the user equipment operates in the near-field region, the transmission differs from the plane waves typically observed in the far field [4]-[5]. The impact of spherical wave propagation in the near field must be carefully evaluated [6]-[8]. Whether LIS is employed in massive MIMO communication or power transmission [9]-[13], it is essential to focus the beam energy to boost the signal-to-noise ratio or increase transmission efficiency. Beamforming is the primary technique for concentrating beam energy, and the implemented methods in the radiative near field can be categorized into two main types [14]-[23]. The first method is the conjugate-phase approach [14]-[19], which has a clear physical interpretation: different phases are assigned to each element to compensate for delays caused by the physical propagation path. For instance, a multifocus antenna array with specified amplitude and phase conditions in the near-field region is developed, utilizing a modeling algorithm that incorporates phase compensation, superposition strategies to enhance spatial resolution and meet diverse multifocus requirements [17]. Besides, a curved substrate integrated waveguide (SIW) is utilized as a feeding carrier to enhance the amplitude and phase control capability of the near-field-focused (NFF) beam, enabling stable focal length and a wide steerable range [19]. The second method involves optimizing both the amplitude and phase of the antenna elements through brute-force search, typically employed in scenarios with specific objectives, such as maximizing transmission efficiency or designing flat-top beams [20]-[22]. Such as a near-field sparse array synthesis method based on Bayesian compressive sensing (BCS) and convex optimization is proposed to generate reference-shaped beams with controllable sidelobe levels, demonstrating effectiveness with over 50% element reduction while maintaining desired near-field patterns [22]. The drawbacks include a lack of physical insight, potential slow convergence, and signal distortion caused by scattering in real-world channels. Therefore, this paper adopts the conjugate- phase method. Moreover, circular polarization (CP) is frequently discussed in far-field applications, such as satellite communications [23] and WiFi systems [24]. Although the concept of circular polarization also exists in the near field, its application is predominantly limited to manipulating circular aperture [25]-[26]. Therefore, this paper further explores the possibility of using a linear array to generate a CP near-field focal point, aiming to address scenarios where the user remains stationary while exhibiting rotational or micro-motion. Unlike studies [10]-[13], which only consider line-of-sight (LOS) scenarios, this paper further investigates the impact of reflected paths in non-line-of-sight (NLOS) environments on both polarization types. It also provides installation guidelines to mitigate the effects caused by reflective paths. Fig. 1: Antenna array equipment for collinear dipoles array. II ANTENNA MODEL The arrangement of dipole arrays is typically classified into three types: side-by-side, collinear, and parallel-in-echelon [27]. Among these, the parallel-in-echelon configuration can be considered a hybrid mode that lies between the first two. Consequently, the side-by-side and collinear arrangements are more commonly employed. According to reference [27], the mutual impedance between dipoles in these two configurations can be calculated using the following: \displaystyle Z_{ss}= \displaystyle\frac{\eta}{4\pi}\big[2C_{i}(u_{0})-C_{i}(u_{1})-C_{i}(u_{2}) (1) \displaystyle-j\big(2S_{i}(u_{0})-S_{i}(u_{1})-S_{i}(u_{2})\big)\big] \displaystyle Z_{co}= \displaystyle\frac{\eta}{8\pi}\big[\big(2S_{i}(2v_{0})-S_{i}(v_{2})-S_{i}(v_{1})\big)\big(\sin(v_{0})-j\cos(v_{0})\big)\big] (2) \displaystyle+\frac{\eta}{8\pi}\big[j\sin(v_{0})\big(2C_{i}(2v_{0})-C_{i}(v_{2})-C_{i}(v_{1})-\ln(v_{3})\big) \displaystyle-\cos(v_{0})\big(C_{i}(v_{2})-2C_{i}(2v_{0})+C_{i}(v_{1})-\ln(v_{3})\big)\big] Compared to side-by-side arrays, collinear arrays exhibit lower coupling between antenna elements, allowing the theoretical model to achieve closer agreement with electromagnetic simulation results. As shown in Fig.1, The horizontal polarization is chosen for each element, that is means, the direction of the electric field (E-field) of the antenna is parallel with the \it{x} -axis. We apply several simplifying assumptions of the array elements: no mutual coupling and only consider the LOS channel at the beginning. All the simulation results are based on the 6 GHz. To demonstrate the impact of horizontal polarization more clearly, here we use a horizontal dipole as an example and borrow the far-field propagation formula of a dipole antenna. In the far-field region, the vector potential \bm{A} of a Hertzian dipole is [27]: \bm{A}(\bm{r})=\frac{I_{0}\mu_{0}\bm{l}}{4\pi r}e^{-jkr} (3) Fig. 2: The variations of E_{x} and E_{z} with respect to the the array length L under a fixed focal position z_{o} = 1.5m. where r is the distance from the dipole to the field point, l is the infinitesimal dipole’s length, and \mu_{0} is the permeability in vacuum. The E-field \bm{E} is obtained from the time derivative of the vector potential: \bm{E}=-j\omega\bm{A}-\nabla\phi=-j\omega\bm{A}-j\frac{1}{\omega\mu_{0}\varepsilon_{0}}\nabla(\nabla\cdot\bm{A}), (4) Considering the polarization of the dipole, and assuming I_{0} is a constant value, the final \bm{E} can be expressed as: \bm{E}(\bm{r},\bm{l})=\frac{j\eta I_{0}\bm{l}k}{4\pi r}e^{-jkr}(\hat{r}\times(\hat{l}\times\hat{r})), (5) \eta is the wave impedance in the free space. \hat{\bm{l}} is the unit vector along the current of the dipole. The linear array is composed of \it{N} antenna elements. \emph{r} is the distance between the space field point and the center fo the dipole antenna. The total electric field at a certain point in space is: \bm{E}(\bm{r},\bm{l})=\sum_{i=0}^{N}\frac{j\eta I_{0}\bm{l}k}{4\pi r_{i}}e^{-jkr_{i}}(\hat{r}_{i}\times(\hat{l}\times\hat{r}_{i})), (6) Because the following relationship between \hat{{l}} and \hat{r} : \hat{r}\times(\hat{l}\times\hat{r})=(\hat{r}\cdot\hat{r})\hat{l}-(\hat{r}\cdot\hat{l})\hat{r}=\hat{l}-(\hat{r}\cdot\hat{l})\hat{r}, (7) Fig. 3: Comparison Between the Numerical and Analytical Solutions of Peak E-Field Intensity. thus, the field point, source point, and dipole placement can be established in the Cartesian coordinate system to derive the total electric field. The polarization of all the elements is along the \it{x} -axis, so \hat{l} can be expressed as (1,0). It is important to note that, although this article focuses on a near-field problem, the studied area is in the far-field region for each antenna element relative to

Read the complete text