Glider Path Design and Control for Reconstructing Three-Dimensional Structures of Oceanic Mesoscale Eddies
Wu Su 1 1 , Xiaoyuan E 2 2 , Zhao Jing 3 , 4 , ∗ 3,4,* , and Song Xi Chen 5 , 6 , ∗ 5,6,* · 2025
Read Glider Path Design and Control for Reconstructing Three-Dimensional Structures of Oceanic Mesoscale Eddies by Wu Su 1 1 , Xiaoyuan E 2 2 , Zhao Jing 3 , 4 , ∗ 3,4,* , and Song Xi Chen 5 , 6 , ∗ 5,6,* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-18936.txt.
Introduction
Wu Su and co-authors work out how underwater gliders should fly to rebuild the full three-dimensional anatomy of an ocean eddy. Mesoscale eddies are the ocean's weather, and gliders sample them slowly, a slice at a time. Their 2025 paper attacks the job in three parts: interpolation, path design, and path control.
Thin plate splines, blocked for speed, stitch sparse glider profiles into a continuous field. A selection procedure then picks, from candidate formation patterns, the routes that minimize reconstruction error. Finally, a control law keeps the glider near its planned track despite currents pushing it sideways. Tested on a simulated eddy, several optimization pairings hold up robustly. Oceanographers get an end-to-end recipe from flight plan to faithful map.
Catalog record
| CREATOR | Wu Su 1 1 , Xiaoyuan E 2 2 , Zhao Jing 3 , 4 , ∗ 3,4,* , and Song Xi Chen 5 , 6 , ∗ 5,6,* |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 64 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-18936
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Glider Path Design and Control for Reconstructing Three-Dimensional Structures of Oceanic Mesoscale Eddies Wu Su 1 1 , Xiaoyuan E 2 2 , Zhao Jing 3 , 4 , ∗ 3,4,* , and Song Xi Chen 5 , 6 , ∗ 5,6,* Abstract Underwater gliders offer effective means in oceanic surveys with a major task in reconstructing the three-dimensional hydrographic field of a mesoscale eddy. This paper considers three key issues in the hydrographic reconstruction of mesoscale eddies with the sampled data from the underwater gliders. It first proposes using the Thin Plate Spline (TPS) as the interpolation method for the reconstruction with a blocking scheme to speed up the computation. It then formulates a procedure for selecting glider path design that minimizes the reconstruction errors among a set of pathway formations. Finally we provide a glider path control procedure to guide the glider to follow to designed pathways as much as possible in the presence of ocean current. A set of optimization algorithms are experimented and several with robust glider control performance on a simulated eddy are identified. I Introduction The mesoscale eddy is one of the most dominant forms of motion in the ocean with diameter ranging from tens to hundreds of kilometers and a vertical depth of hundreds to thousands meters [ 1 ] . The study of the three-dimensional hydrographic field of mesoscale eddies is a major issue in oceanography and marine science with great significance in the study of climate and marine ecosystems [ 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 ] . Although the spatial resolution of state-of-the-art ocean general circulation models has become fine enough to resolve mesoscale eddies due to the rapidly increased computational capacity [ 11 ] , they are still far from being able to accurately simulate mesoscale eddies [ 12 , 13 ] . Simulating a particular mesoscale eddy is even more challenging in practice due to its turbulent properties. The remote-sensing based measurements can only acquire the footprint of mesoscale eddies at the sea surface, such as eddy-induced sea surface height and temperature anomaly [ 14 ] . The surface eddy signals can be used to infer the three-dimensional structure of mesoscale eddies [ 15 , 16 , 17 , 18 ] . For instance, [ 19 ] argued that the vertical structure of mesoscale eddies can be universally represented by a sinusoidal function in a stretched coordinate depending on the ratio of buoyancy frequency to Coriolis frequency. [ 20 ] reconstructed the three-dimensional structure of mesoscale eddies using the sea surface temperature from satellite observations based on a surface quasi-geostrophic framework. However, the dynamical frameworks underpinning the reconstruction are likely to be an oversimplification of the real ocean. Furthermore, the reconstruction is essentially done for seawater density. The temperature and salinity associated with mesoscale eddies cannot be derived without making assumptions on their relationship. Controllable and autonomous ocean in-situ observation platforms provide an alternative solution to observe the eddy structure by actively collecting the hydrographic data within mesoscale eddies, and then reconstructing the three-dimensional hydrographic field of mesoscale eddies from the collected data. An underwater glider (UG) is an autonomous underwater vehicle (AUV), which adjusts its buoyancy to realize rising and glides with the help of hydrodynamics of ocean current using fixed wings [ 21 , 22 , 23 ] . The glider collects data such as sea water temperature and salinity with quite high temporal resolution along designed paths. By recording the underwater speed of the sensor, the glider’s three-dimensional coordinates can be calculated [ 24 ] . Due to its relatively low cost and large spatial coverage, underwater gliders have been widely used to observe the three-dimensional hydrographic structure of mesoscale eddies, and the need for high-resolution reconstruction of mesoscale eddies has seen more gliders being put into use. There are three imperative issues in efficient usage of ocean gliders. One is how to design the travel paths of the gliders in order to provide efficient sampled data for more accurate reconstruction on the three-dimensional hydrographic field of a mesoscale eddy. The other one is how to make the glider to travel along the designed pathway in the presence of ocean current. The third issue is in finding computationally efficient interpolation methods for efficient accomplishing the three-dimensional hydrographic properties reconstruction based on the glider sampled data. There has been no a systematic solution to these issues in existing research as far as we are aware. For the glider path design, the existing works tended to focus on minimizing two-dimensional reconstruction errors. For the circular glider formations, [ 25 ] derived the glider path scheme with minimal expected reconstruction error at two-dimensional sea surface. [ 26 ] combined gliders with a network of profiling floats to calculate the optimal path design for up to three gliders using a genetic algorithm to minimize the average error of the reconstructed field. A combination of mooring systems was likewise considered in [ 27 ] . A popular method for the reconstruction of mesoscale eddy is the spatial interpolation based on smooth two-dimensional or three-dimensional interpolation functions [ 20 , 28 ] . [ 29 ] proposed the inverse distance weighted (IDW) interpolation, which assigns larger weights to the closer observed data points. Another commonly used spatial interpolation method is the Kriging [ 30 , 31 , 32 , 33 ] , which is a statistical method that utilizes the spatial dependence for best linear unbiased interpolation. The IDW and Kriging methods are much used in geology and atmospheric science, and the IDW interpolation had been used in three-dimensional eddy reconstruction [ 34 ] . Interpolation with spline functions is another method, which fits a piece-wise function through observation points and satisfy certain smoothness conditions [ 35 ] . [ 36 ] introduced spline interpolations to spatial analysis in meteorology, and in particular the Thin Plate Spline (TPS). [ 37 ] proved that there is a mathematical connection between the TPS and the Kriging, and pointed out that the TPS interpolation using generalized cross-validation to select the roughness penalty parameters may be more efficient than Kriging. [ 38 ] proposed a method to select tuning parameters by minimizing the mean square error, which further improved the performance of the TPS interpolation. Existing studies on glider path control were largely focused on getting the glider to the destination with the least amount of time and energy consumption, without paying much attention on the glider’s path design and the quality of the eddy reconstruction. As the glider’s movement is interfered by the ocean current, control methods such as the Proportional–Integral–Derivative (PID) controller have been used in attitude control of gliders. [ 39 ] proposed a hybrid heading control algorithm that integrated an adaptive fuzzy incremental PID with an anti-saturation compensation strategy to achieve robust heading control. Other studies considered minimizing the travel time or energy consumption [ 40 ] . [ 41 ] applied the particle swarm optimization algorithm to glider path controlling. [ 42 ] conducted a series of simulation experiments and field tests. The feasibility of applying Differential Evolution (DE) Algorithm to the task of minimizing the travel time of