Diffraction of fast heavy noble gas atoms, Ar, Kr and Xe on a LiF(001) surface Changing the tip of a ’perfect’ AFM

M. Debiossac, P. Pan, C. Kanitz, P. Roncin · 2025

Read Diffraction of fast heavy noble gas atoms, Ar, Kr and Xe on a LiF(001) surface Changing the tip of a ’perfect’ AFM by M. Debiossac, P. Pan, C. Kanitz, P. Roncin (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-18327.txt.

Introduction

Maxime Debiossac and co-authors study diffraction of fast noble gas atoms on a crystal surface in work from 2025. They fired argon, krypton, and xenon atoms at a lithium fluoride surface along two crystal directions.

The wavelengths are so short that semi-classical models describe the quantum patterns well. As mass and energy rose, more diffraction peaks and rainbow peaks appeared, but contrast faded. The innermost peaks vanished first. Along one direction, only one row type shaped the signal. After removing attraction effects, they present a surface profile that a perfect microscope tip could in principle map.

Catalog record

CREATORM. Debiossac, P. Pan, C. Kanitz, P. Roncin
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-18327

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Diffraction of fast heavy noble gas atoms, Ar, Kr and Xe on a LiF(001) surface Changing the tip of a ’perfect’ AFM M. Debiossac, P. Pan, C. Kanitz, P. Roncin Abstract We investigate experimentally the diffraction of fast atoms of noble gas on a LiF(100) crystal oriented along the [100] and [110] directions. The wavelengths are so short that the observed quantum features are qualitatively described by semi-classical models. With increasing mass and energy, the scattering profiles show an increasing number of diffraction peaks forming an increasing number of supernumerary rainbow peaks but progressively weakening in contrast. The innermost peaks corresponding to individual Bragg peaks disappear first. Along the [100] direction, only one type of atomic row contributes to the diffraction signal. After removing the contributions of the attractive forces, we present topological corrugation that should compare with those accessible with an atomic force microscope (AFM). pacs 34.35.+a,68.49.Bc,34.50.Cx,79.20.Rf,79.60.Bm,34.20.Cf I Introduction The diffraction of fast atoms on crystal surfaces at grazing angle of incidence (GIFAD) has emerged in the last decades as a new tool to investigate pristine crystal surfaces and to track the growth of thin films. It uses atoms with a kinetic energy E_{0}\sim keV and the same grazing geometry as reflection high energy electrons diffraction, leaving the volume above the surface free for evaporation cells. In this grazing geometry, the perfect decoupling of the fast motion parallel to the probed crystal axis and the slower one perpendicular to it has been demonstrated for elastic diffraction [ 1 , 2 , 3 ] . By tuning the angle of incidence \theta_{i} between typically 0.2 ∘ and 2 ∘ , the effective interaction energy E_{\perp}=E_{0}\sin^{2}\theta_{i} can be adjusted from a few meV to several eV. In the elastic regime, GIFAD is equivalent to thermal energy helium scattering (TEAS) but it differs in the inelastic regime because the momentum transfer to the surface atoms occurs in several gentle collisions so that elastic diffraction can be observed at larger values of E_{\perp} , higher surface temperature and with heavier projectiles: We investigate here experimentally and via simulations the consequences of increasing the mass of the projectile atoms. • For comparable energy the wavelength reduces (see Table 1 ) allowing potentially higher spatial resolution but the Bragg angle \phi_{B} separating diffraction spots reduces with \lambda requiring more collimated beams. • The momentum transferred to the surface increases rapidly, increasing significantly the probability of phonon excitation as described by the Debye-Waller factor adapted to GIFAD [ 4 , 5 , 6 ] . • The larger number of valence electrons increases the magnitude of the Pauli repulsion, pushing the classical turning point away from the surface. This is balanced by the increased polarizability attracting the projectile towards the surface. Within the Born-Oppenheimer approximation, the diffracted intensities correspond to the quantum scattering of the projectile atom in the potential energy landscape (PEL) describing the energy of the projectile at any location E(x,y,z) above a surface lattice unit. A complete approach such as e.g. wavepacket propagation [ 7 , 8 , 9 ] or close-coupling [ 10 ] provides exact correspondence between the PEL and the diffraction patterns at various energies, as well as possible bound state resonances [ 11 , 12 ] or quantum reflection [ 13 ] . This is specific to the quantum regime where \lambda is larger than typical dimensions of the surface topology. The first direct consequence of the reduced wavelength attached to larger masses is that the observations presented here correspond to the semi-classical regime and can, at least qualitatively, be explained by phases attached to classical trajectories and interferences between different paths ending at identical final scattering angles \theta_{f} , \phi_{f} . In this regime the connection to the surface topology is more direct and the information derived should compare with that from atomic force microscopy (AFM). For example, the corrugation amplitude describing the size of bumps measured by an AFM on top of the surface is also measured by GIFAD but in the reciprocal space. Such analogy was popularized by the semi-quantitative hard corrugated wall model (HCW). It is an optical model considering straight line reflection from the iso-energy surface z_{E}(x,y) assumed to represent the surface where the classical trajectories are reflected. The diffracted intensities are therefore obtained by a Fourier transform of the topology. However, as a reciprocal space technique, atomic diffraction measures scattering angles acquired essentially while bouncing off these bumps. However, trajectories are also affected by angular changes due to the attractive forces modifying outgoing trajectories. The vast majority of publications on atomic diffraction on surfaces consider He as a projectile (see e.g. Ref. [ 14 ] for a recent review at thermal energies) but numerous theoretical studies [ 15 , 16 , 17 , 18 ] as well as a few experimental works considering Ne [ 19 , 20 , 21 , 22 , 23 ] have been published. Detailed data for helium [ 24 , 25 ] and neon [ 26 , 23 , 27 ] have already been published over a wide range of energy and angle and only the new results with Ar, Kr and Xe will be presented. Rather than three independent section with each projectile, the paper focuses on specific topics and their evolution along the Ar, Kr and Xe sequence. The outline is as follows: After a brief recall of the GIFAD technique in Sec. II , Sec. III to Sec. VII are a purely experimental description of the evolution from quantum to classical features. The elastic and inelastic diffraction peaks are presented in Sec. III and Sec. IV respectively. Section V presents the supernumerary rainbows while Sec. VI focuses on the classical rainbow and Sec. VII focuses on comparatively larger collision energy where no trace of quantum behavior can be seen but where specific features can be efficiently described by semi-classical models. Section VIII presents all the data in a more comprehensive way highlighting the role of the attractive forces extending up to eV effective energies and that of the topology, dominant at larger energies. A model potential energy landscape fitted to the diffraction data is presented for the [100] direction and the resulting surface topology is derived for all noble gases along this direction before tracing perspectives and conclusion in Sec. IX . Figure 1: Raw camera capture of the scattered atoms on the detector for 500 eV Ar impinging LiF(001) along [110] direction at \theta_{i}=1^{\circ} , \phi_{i}=0^{\circ} . The dashed circle \theta_{f}=\theta_{i} corresponds to energy conservation; |k_{f}|=|k_{i}| , the vertical line is the specular plane k_{y_{f}}=k_{y_{i}} . In the lab frame, the azimuthal (lateral) deflection angle is \phi_{f}=\arctan(k_{y_{f}}/k_{x_{f}})\simeq k_{y_{f}}/|k_{i}| , less than a degree while the angle in the (y,z) detector plane is \Theta_{f}=\arctan({k_{y_{f}}/k_{z_{f}}})\simeq\arctan(\phi_{f}/\theta_{i}) is equivalent to the angles measured in TEAS and can reach \pm 90^{\circ} . II Experimental setup A detailed description of the GIFAD setup and of the associated coordinate system can be found in Refs. [ 28 ] and [ 29 ] respectively and only a simple sketch is presented below. An ion beam of kinetic energy E_{0} is neutralized in a charge exchange cell and severely collimated by two diaphragms half a meter apart to reduce the angular divergence to

Read the complete text