A finite volume Simo-Reissner beam method for moored floating body dynamics

Amirhossein Taran, Seevani Bali, Zeljko Tukovic, Vikram Pakrashi, Philip Cardiff · 2025

Read A finite volume Simo-Reissner beam method for moored floating body dynamics by Amirhossein Taran, Seevani Bali, Zeljko Tukovic, Vikram Pakrashi, Philip Cardiff (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-18248.txt.

Introduction

Amirhossein Taran and four co-authors model mooring lines as true beams inside a fluid dynamics toolbox. Their paper appeared in two thousand twenty-five. Floating structures ride waves while cables hold them in place. Most models treat cables as chains of lumped masses. Bending and twisting then go missing. Extreme seas punish exactly those missing forces.

Their model uses the geometrically exact Simo-Reissner beam theory. A finite volume scheme runs it inside OpenFOAM. The floating body and its lines evolve together. Bending, tension, and torsion all enter the physics. Tests against experiments and other simulations validate the setup. Offshore engineers gain a sharper tool for storm design.

Catalog record

CREATORAmirhossein Taran, Seevani Bali, Zeljko Tukovic, Vikram Pakrashi, Philip Cardiff
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE60 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-18248

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A finite volume Simo-Reissner beam method for moored floating body dynamics Amirhossein Taran, Seevani Bali, Zeljko Tukovic, Vikram Pakrashi, Philip Cardiff Abstract This paper presents a novel finite volume mooring line model based on the geometrically exact Simo-Reissner beam model for analysing the interaction between a floating rigid body and its mooring lines. The coupled numerical model is implemented entirely within a finite volume-based discretisation framework using a popular computational fluid dynamics C++ toolbox, OpenFOAM. Unlike existing methods for modelling mooring lines, which rely on lumped mass models or finite element-based approaches, this work simulates the mooring cables using non-linear beam models implemented in a finite volume framework to account for bending, tensile, and torsional loading. This advancement makes the current work particularly valuable for simulating extreme sea conditions. The coupled model developed in this study has been validated and verified using experimental and numerical data for a floating box moored with four catenary mooring lines under regular wave conditions featuring different wave heights and periods. The results demonstrate strong agreement with both experimental and numerical data, highlighting the model’s accuracy in capturing mooring dynamics and floating body motion. keywords Fluid-structure interaction, ,Mooring cables, ,Simo-Reissner beam model, ,Finite volume method, ,OpenFOAM 1 Introduction The importance of mooring lines extends beyond mere attachment and station-keeping; they fundamentally contribute to the safety and operational viability of floating offshore structures, especially in environments where uncontrolled movement could lead to catastrophic consequences, such as complete structural failure ( Yang et al. 2021 ) . An accurate model of mooring lines is not only essential for understanding the hydrodynamic response amplitude of floating offshore structures but is also critical for assessing long-term fatigue and ensuring the longevity of both the mooring system and the floating structure it supports. Mooring line analysis models are generally categorised into static, quasi-static, and dynamic types. Static models ( Oppenheim and Wilson 1982 ; Smith and MacFarlane 2001 ) assume that the system is in static equilibrium, accounting only for constant forces such as steady wind or current loads while neglecting any time-dependent or dynamic effects. This simplification allows for basic assessments of mooring line tension and position ( Karnoski and Palo 1988 ) under calm or steady-state conditions but may overlook critical forces in more variable environments. Quasi-static models, on the other hand, enhance the realism of static analyses by incorporating slowly varying environmental forces and accounting for the mooring line’s stiffness response to changing loads ( Dunbar et al. 2015 ; Cheng et al. 2019 ) . However, they still neglect high-frequency dynamics associated with wave action. The quasi-static approach offers a balance between simplicity and accuracy ( Liu et al. 2017 ) . It is well-suited for conditions dominated by low-frequency forces. In contrast, full dynamic modelling is more appropriate for scenarios where wave-induced motions play a significant role. When the floating structures experience large amplitude motions, the dynamic behaviours of the mooring system become non-negligible ( Masciola et al. 2013 ) . Thus, quasi-static models will underestimate the tension on the lines ( Chen and Hall 2022 ; Hall and Goupee 2015 ) . Incorporating dynamic effects into the equations of motion for mooring lines allows dynamic analysis models to predict mooring loads and the resulting responses of floating structures with greater accuracy compared to static and quasi-static models. Mooring Design and Dynamics (MDD) ( Dewey 1999 ) which solves the dynamic equilibrium equations under environmental loads, SEAWAY ( JMJ Journee, LJM Adegeest 2003 ) , which is a frequency-domain model, OrcaFlex ( Randolph and Quiggin 2010 ) which is a non-linear framework for time-domain analysis, are some of the recent dynamic mooring models. Ferri and Palm ( Ferri and Palm 2015 ) developed a finite element model (named Moody) with high-order polynomial basis functions and spatial discretisation using the local discontinuous Galerkin method. Following this higher-order approach, Moody was developed with the aim of resolving snap loads, and it incorporates a range of hydrodynamic forces within the model ( Davidson and Ringwood 2017 ) . The bending stiffness has later been added to the model to investigate the bending stiffness on snap-loads ( Palm and Eskilsson 2020 ) . Hall et al. ( Hall 2015 ) developed an open-source dynamic model called MoorDyn based on lumped mass approach ( Kreuzer and Wilke 2002 ) , which discretises the mooring line into a finite number of mass nodes connected with mass-less springs. While the initial version of MoorDyn neglects bending stiffness, this feature was later added in the model ( Hall et al. 2021 ) . In all the aforementioned references, the consistent conclusion is that incorporating bending stiffness into mooring cable analysis diversifies the usability of the numerical simulation to low-tension and slack conditions, avoiding any ill-conditioning of the system characteristics. Recently, some researchers have focused on coupling dynamic mooring analysis models with computational fluid dynamics (CFD) simulations to enhance the accuracy of mooring system behaviour predictions under complex fluid-structure interactions. This approach allows for the detailed simulation of forces from waves and currents on mooring lines, improving the understanding of both static and dynamic responses in challenging offshore environments ( Darling and Schmidt 2024 ) . CFD models can utilise either mesh-based or mesh-free approaches. Mesh-free approaches are primarily suitable for free-surface wave structure interaction problems due to their speed-up when using graphical computing units and their ability to capture interfaces without any additional processing ( Chen and Hall 2022 ; Lind et al. 2020 ) . Dominguez et al. ( Domínguez et al. 2019 ) was the first to couple DualSPHysics ( Crespo et al. 2015 ) , which is an open-source parallel mesh-free CFD solver based on smoothed particle hydrodynamics (SPH) with MoorDyn. Later Liu and Wang ( Liu and Wang 2020 ) extended this coupling to study different submerged box-type breakwaters. Although these mesh-free methods are popular among researchers, they can become highly complex regarding particle refinement and turbulence modelling ( Macià et al. 2021 ; Vacondio et al. 2021 ) . Islam et al. ( Islam et al. 2019 ) studied the wave radiation due to heave, surge, and pitch by a box-type floating structure using OpenFOAM ( Weller et al. 1998 ) , a widely-used CFD toolbox. Haider et al. ( Haider et al. 2024 ) carried out a fully coupled fluid-structure interaction analysis for a floating offshore wind turbine, employing MoorDyn to model the mooring system and OpenFOAM as the CFD platform. Wei et al. ( Wei et al. 2024 ) performed a coupled simulation of a very large floating structure (VLFS) moored with catenary mooring lines using OpenFOAM and MBDyn ( Masarati et al. 2014 ) . Palm et al. ( Palm et al. 2016 ) conducted a coupled CFD-mooring analysis of a wave energy converter (WEC), coupling OpenFOAM with Moody to simulate the behaviour of the mooring lines. Similarly, Chen and Hall ( Chen and Hall 2022 ) integrated MoorDyn with OpenFOAM to simulate a moored floating box. More recently, they extended their work to model multiple floating objects ( Chen et al. 2024 ) . Beyond the studies mentioned, additional research has explored coupling mooring line models with various CFD software ( Qiao et al.

Read the complete text