Higher-order topological corner states and edge states in grid-like frames

Yimeng Sun, Jiacheng Xing, Li-Hua Shao, Jianxiang Wang · 2025

Read Higher-order topological corner states and edge states in grid-like frames by Yimeng Sun, Jiacheng Xing, Li-Hua Shao, Jianxiang Wang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-18137.txt.

Introduction

Yimeng Sun, Jiacheng Xing, Li-Hua Shao, and Jianxiang Wang analyze topological vibrations in grid-like frames, in a two thousand twenty-five paper. Such frames, built from rigidly jointed beams, are classics of structural mechanics. Their topological behavior, where vibrations localize at edges and corners, was recognized only recently.

In two-dimensional frames the topological states can overlap in frequency with ordinary bulk modes. That overlap makes the interesting modes hard to identify. The authors derive exact formulas for the frequencies of corner, edge, and bulk states. Kagome and square frames are both treated. They also give criteria for when each state exists and where it sits in the spectrum. The corner states proved robust under perturbations, which matters for practical vibration control.

Catalog record

CREATORYimeng Sun, Jiacheng Xing, Li-Hua Shao, Jianxiang Wang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE84 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-18137

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Higher-order topological corner states and edge states in grid-like frames Yimeng Sun, Jiacheng Xing, Li-Hua Shao, Jianxiang Wang Abstract Continuum grid-like frames composed of rigidly jointed beams are classic subjects in the field of structural mechanics, whose topological dynamical properties have only recently been revealed. For two-dimensional frames, higher-order topological phenomena may occur, with frequency ranges of topological states and bulk bands becoming overlapped, leading to hybrid mode shapes. Concise theoretical results are necessary to identify the topological modes in such planar continuum systems with complex spectra. In this work, we present analytical expressions for the frequencies of higher-order topological corner states, edge states, and bulk states in kagome frames and square frames, as well as the criteria of existence of these topological states and patterns of their distribution in the spectrum. We identify the edge and corner states even under their degeneracy with the bulk bands. We show that the corner states are within the bandgaps of edge states unless topological transitions occur, and demonstrate the robustness of higher-order topological states under perturbations. These theoretical results fully demonstrate that the grid-like frames, despite being a large class of two-dimensional continuum systems, have topological states that can be accurately characterized through concise analytical expressions. This work contributes to the study of topological mechanics, and the accurate and concise theoretical results facilitate direct applications of topological grid-like frame structures in industry and engineering. 1 Introduction Topological mechanical materials [ 13 ] , originating from topological insulators in condensed-matter physics [ 39 ] , can host topologically protected mechanical modes that exhibit robustness, and have received widespread attention in engineering fields. Although topological mechanical materials share many similarities with topological insulators in physical mechanisms, constructing novel topological mechanical systems requires appropriate formulations that are based on mechanical principles and consequently admit topological properties mathematically. In the field of topological mechanics, spring–mass systems are widely adopted to realize static topological zero modes [ 17 , 6 ] , modes of self-stress [ 17 ] , and dynamical topological modes [ 41 , 61 , 4 , 5 , 33 , 53 ] , usually enabling an analytical description of the topological properties [ 5 , 40 ] . On the other hand, continuum topological mechanical systems [ 12 ] have received growing interest due to the wider applicability of continuum materials in real-world scenarios; in this respect, truss structures are tailored to host static topological modes [ 23 , 62 ] , and continuum elastic structures with spatially modulated stiffness or mass are constructed to achieve topological modes in the dynamical regime [ 55 , 25 , 31 , 10 , 63 , 60 ] . Research in this regard has greatly facilitated the application of topological modes in exploring novel wave phenomena [ 57 , 7 ] . Typically, the analysis of topological modes in continuum elastic systems is largely based on numerical calculations such as finite-element simulations or experimental methods [ 45 , 8 , 36 ] . However, the infinite-degree-of-freedom nature of the continuum endows such systems with not only multiple frequency bands but also multiple topological phase transition points [ 48 , 55 , 25 ] , for which it is challenging to obtain a relation between the topological phases of different bands and the structural parameters in a simple and exact form. The characterization of topological properties of continuum systems in an analytical manner and identification of topological phase transitions across the whole frequency spectrum are desired for fully revealing and applying the ample topological properties of continuum systems. To this end, the authors have recently revealed the topological dynamical properties for a class of one-dimensional (1D) continuous beam structures, and set up a theoretical framework to describe the multiple topological phase transitions therein [ 35 ] . We demonstrated that the theoretical framework can be applied to reveal the topological dynamics of a broad class of continuum grid-like frame structures such as square frames, kagome frames, and bridge-like frames, and some topological modes at certain frequencies are demonstrated as examples [ 35 ] . Compared with conventional topological insulators, higher-order topological insulators can accommodate not only robust edge/surface states, but also lower-dimensional corner states [ 1 , 32 , 9 , 50 , 2 , 51 , 47 , 19 ] . Topological mechanical systems, due to the advantage of macroscopic size and flexibility in frequency excitations [ 22 ] , have also become a popular platform for research in higher-order topological phases [ 10 , 31 , 46 ] . Higher-order topological materials feature more intricate band topology and phase transitions, and may commonly be accompanied by degeneracy between different types of modes [ 20 , 59 , 27 ] . Integrating higher-order topology into continuum mechanical systems would pose a notable challenge as to an exact characterization of the topological modes and phase transitions in an analytical manner. Grid-like frames [ 15 , 42 , 24 , 14 ] are structures composed of intersecting elastic beams; while such structures do not exhibit an apparent “concentrated mass” characteristic [ 45 , 3 , 44 , 54 ] , they provide an effective and practical platform for accommodating higher-order topological phases, being both easy to manufacture and omnipresent in reality in various forms. In two-dimensional (2D) grid-like frames, as the frequency ranges of higher-order corner states and edge states may become overlapped with bulk states, leading to possible hybridization of the mode shapes, it is difficult to exactly identify the topological modes through numerical techniques. Therefore, an analytical approach able to derive the existence and frequency ranges of topological states for grid-like frames is of crucial importance for us to gain an understanding of the topological phases of higher-order topological continuum systems and guide practical engineering applications. In this paper, we present an analytical method to characterize the higher-order topological properties of planar continuum grid-like frames. For square and kagome frames, we derive exact analytical expressions for topological phase transitions in terms of geometric parameters. Although the topological corner states, edge states, and bulk states in higher-order topological grid-like frames may have overlapping frequency regions, the proposed analytical method enables determination of exact frequency ranges for the corner, edge, and bulk states, as well as clear existence conditions of the topological modes. Furthermore, through both theoretical arguments and finite-element simulations, we demonstrate that while higher-order topological corner states may be degenerate with bulk states, they remain localized within the bandgap of edge states and retain robustness. We extend the theory to topological heterostructures, illustrating that connecting grid-like frames with different higher-order topological phases results in the emergence of topological corner states at the interface. The concise theoretical results on the topological dynamics of complex frame structures facilitate direct applications of these findings to industrial engineering domains such as safety assessment and robust waveguiding [ 28 , 21 ] . 2 Preliminaries The authors have recently presented a theoretical framework for the band-structure analysis of a broad class of continuum elastic frame structures, along with a method of deriving the dynamical matrix [ 35 ] . For present purposes, we are concerned with the in-plane motion of several types of frame structures consisting of beams with uniform linear

Read the complete text