Angle-of-arrival detection of radio-frequency waves via Rydberg atom fluorescence imaging of standing waves in a glass vapor cell

Noah Schlossberger, Rajavardhan Talashila, Nikunjkumar Prajapati, Christopher L. Holloway · 2025

Read Angle-of-arrival detection of radio-frequency waves via Rydberg atom fluorescence imaging of standing waves in a glass vapor cell by Noah Schlossberger, Rajavardhan Talashila, Nikunjkumar Prajapati, Christopher L. Holloway (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-18028.txt.

Introduction

Noah Schlossberger, Rajavardhan Talashila, Nikunjkumar Prajapati, and Christopher Holloway present a new way to find the direction of incoming radio waves. Their 2025 paper uses light from rubidium atoms held in a glass cell. When a strong radio signal enters the cell, it forms standing waves with a clear pattern.

By imaging the light given off by the atoms, the team maps that pattern across the cell. From the map they read both the angle of the wave and the sign of its direction. Tests gave an error near one degree for waves in the plane of the cell. The small setup needs no large antenna array and works for all wave types.

Catalog record

CREATORNoah Schlossberger, Rajavardhan Talashila, Nikunjkumar Prajapati, Christopher L. Holloway
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-18028

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Angle-of-arrival detection of radio-frequency waves via Rydberg atom fluorescence imaging of standing waves in a glass vapor cell Preprint: AIP/123-QED Noah Schlossberger, Rajavardhan Talashila, Nikunjkumar Prajapati, Christopher L. Holloway Abstract We present a method for measuring the angle-of-arrival of 40 GHz radio-frequency (RF) radiation by mapping the standing waves generated in a rectangular glass vapor cell. These standing waves have regular and well-defined structure from which we can infer the angle and sign of the wavevector of the RF field. We map the field using spatially resolved light sheet spectroscopy of Rydberg states of rubidium atoms in the cell. Unlike traditional phased arrays, this detection scheme is compact and low-complexity, has an active area of nearly 4 π \pi steradians, and is sensitive to all RF polarizations. For in-plane measurements ( ϕ = 0 \phi=0 ), we demonstrate quantitative angle-of-arrival measurements with an uncertainty on the order of one degree in an 11 s measurement, and for out-of-plane measurements (arbitrary θ \theta , ϕ \phi ), we demonstrate angle-of-arrival detection with uncertainty on the order of several degrees. I Introduction Angle-of-arrival measurements of radio-frequency (RF) radiation have many applications in industry and defense Eranti and Barkana 2022 , including wireless communication Nabeel et al. 2024 , radar tracking Skolnik 2008 , electronic warfare Spezio 2002 , and navigation systems Evans et al. 1982 . Classically, angle-of-arrival is determined using phased array antennas Chen et al. 2010 , which consist of spatially separated receivers that detect the relative phase at each point. While phased arrays are effective, they have several drawbacks: they are technologically complex, they scatter and absorb the incoming radiation, their active area is often limited to one hemisphere, and they tend to have a large radar cross-section. We develop a detection scheme that solves these issues by imaging the RF standing waves formed between the walls of a rectangular glass cell of atomic vapor. Rydberg states of alkali atoms in atomic vapor have been demonstrated as effective traceable sensors of electromagnetic radiation with minimal perturbation to the fields they intend to measure Schlossberger et al. 2024a ; Sedlacek et al. 2012 . These sensors measure the electric field’s perturbation to these states spectroscopically using electromagnetically induced transparency (EIT). A resonant RF field will induce a splitting in the energy of the Rydberg state proportional to the amplitude of the electric field. With a local oscillator, the phase of the incoming radiation can be measured Simons et al. 2019 , which allowed for angle-of-arrival detection in Rydberg sensors Robinson et al. 2021 ; Gill et al. 2025 ; Mao et al. 2024 ; Gong et al. 2025 ; Scorrano et al. 2021 ; Yan et al. 2023 , but at the cost the local oscillator emitting radiation. To avoid this, we demonstrated an all-optical technique for measuring angle-of-arrival by generating a standing wave using a metal plate inside of the vapor cell and taking a two-point measurement of the resulting standing wave Talashila et al. 2025 . Limitations of this technique arise due to limited active angle and difficulty in determining the sign of the angle of arrival. Recently, we developed a spatially resolved detection method using fluorescence imaging that allows the EIT spectrum to be measured simultaneously at every point in a plane, thus allowing us to “image” the RF field inside a vapor cell Schlossberger et al. 2024b . After using this technique to study surface effects Patrick et al. 2025 , we now turn it to angle-of-arrival measurements. It has been demonstrated that the dielectric walls of atomic vapor cells cause reflections and standing-waves of the RF incident fields inside of the vapor cell Fan et al. 2015 ; Holloway et al. 2014 . Here we use a rectangular vapor cell with thick walls of order 1/4 of the RF wavelength in order to generate strong standing patterns, which have well-defined structure that is dependent on the angle-of-incidence. We then image these standing waves using fluorescent detection, and fit the profiles to determine the angle-of-arrival. In this scheme, the interaction of the radiation with the vapor cell walls, which limits the accuracy of phase-based angle-of-arrival measurements Richardson et al. 2025 , is actually the interaction that gives angle-of-arrival resolution. II Detection Scheme Figure 1: Scheme for measuring the electric field in a plane using Rydberg atoms. (a) Energy level diagram of the spectroscopic readout. (b) Layout of the detection scheme. (c) The fluorescence \mathcal{F} is recorded on the image as the detuning of \Delta_{c} of the coupling laser is scanned. The profile of the change in fluorescence \Delta\mathcal{F} as a function of the laser frequency is fit at each pixel to find the induced splitting \Omega_{RF} . (d) The result is a spatial profile of |E| using Eq. 1 . Our detection scheme uses the same principle as Ref. Schlossberger et al. 2024b . We probe the Rydberg state via two-photon EIT in 85 Rb (Fig. 1 a). Here, \ket{r_{1}} and \ket{r_{2}} are two Rydberg states, with which the RF will be resonant. We read out the transparency via the decrease in fluorescence of the intermediate 5P_{3/2} state, which we image to give spatial resolution (Fig. 1 b). Due to the Autler-Townes effect, the RF field induces an energy-splitting in \ket{r_{1}} given by \hbar\Omega_{\textrm{RF}}=\mu_{\textrm{RF}}|E|, (1) where \hbar is Planck’s constant, \Omega_{\textrm{RF}} is the Rabi frequency of the RF field, \mu_{\textrm{RF}} is the transition dipole moment between states \ket{r_{1}} and \ket{r_{2}} , and |E| is the amplitude of the RF field applied. We read out this energy-splitting spectroscopically by scanning the frequency of the coupling laser (Fig. 1 c). Fitting the spectrum measured at each pixel to find the Rabi frequency \Omega_{\textrm{RF}} , and thus the field magnitude via Eq. 1 , we get a spatially resolved image of the RF field magnitude (Fig. 1 d). One field distribution measurement takes approximately 11 s, limited by the integration time required for adequate signal-to-noise. III Planar measurements ( \phi=0 ) Consider the case of wavevectors constrained to the x - z plane, or in spherical coordinates, \phi=0 (Fig. 2 a). In the presence of two partially reflective surfaces in the z - y and x - y planes, the reflected fields interfere with each other, creating the field distribution shown in Fig. 2 b. Figure 2: Principle of the angle of arrival scheme. (a) Definition of the coordinate system used in this paper. (b) Modeled standing wave pattern of light incident on two orthogonal partially reflective surfaces. The field is presented in the x - z plane with a k -vector at \theta=60^{\circ} , \phi=0 . Figure 3: Standing waves of 36.8951 GHz radiation measured via the \ket{r_{1}}=39D_{5/2}\rightarrow\ket{r_{2}}=40P_{3/2} level scheme at various values of \theta . (a) Left: the geometrically measured angle to the horn antenna. Middle: grayscale images of the vapor cell, with the measured field overlayed in color. The field is masked by the signal-to-noise ratio of the EIT spectrum such that the field is only shown where it is accurately measured. Right: Finite element simulation of the vapor cell in two dimensions assuming an incident plane wave. (b) At \theta=-32.2^{\circ} , the fluorescence image of the field is integrated in x and z , and

Read the complete text