Design and benchmarking of a two degree of freedom tendon driver unit for cable-driven wearable technologies
Adrian Esser, Chiara Basla, Peter Wolf, Robert Riener · 2025
Read Design and benchmarking of a two degree of freedom tendon driver unit for cable-driven wearable technologies by Adrian Esser, Chiara Basla, Peter Wolf, Robert Riener (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-17736.txt.
Introduction
Adrian Esser, Chiara Basla, Peter Wolf, and Robert Riener present an engineering paper from 2025 on wearable robots. Soft suits that help arms or legs move often pull on cables to do the work. The paper gives a full design for a small drive unit that pulls two cables at once.
The authors also set out clear tests for such a unit. They check torque, speed control, noise, cooling, and battery life under load. Their unit is built in parts, so motors, pulleys, and sensors can be swapped to fit a new task. By sharing both the design and the test steps, the paper aims to help other teams build and report on their own units.
Catalog record
| CREATOR | Adrian Esser, Chiara Basla, Peter Wolf, Robert Riener |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-17736
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design and benchmarking of a two degree of freedom tendon driver unit for cable-driven wearable technologies Adrian Esser, Chiara Basla, Peter Wolf, Robert Riener Abstract Exosuits have recently been developed as alternatives to rigid exoskeletons and are increasingly adopted for both upper and lower limb therapy and assistance in clinical and home environments. Many cable-driven exosuits have been developed but little has been published on their electromechanical designs and performance. Therefore, this paper presents a comprehensive design and performance analysis of a two degree of freedom tendon driver unit (TDU) for cable-driven wearable exosuits. Detailed methodologies are presented to benchmark the functionality of the TDU. A static torque output test compares the commanded and measured torques. A velocity control test evaluates the attenuation and phase shift across velocities. A noise test evaluates how loud the TDU is for the wearer under different speeds. A thermal stress test captures the cooling performance of the TDU to ensure safe operation at higher loads. Finally, a battery endurance test evaluates the runtime of the TDU under various loading conditions to inform the usable time. To demonstrate these tests, a modular TDU system for cable-driven applications is introduced, which allows components such as motors, pulleys, and sensors to be adapted based on the requirements of the intended application. By sharing detailed methodologies and performance results, this study aims to provide a TDU design that may be leveraged by others and resources for researchers and engineers to better document the capabilities of their TDU designs. I Introduction In the past decade, exosuits have emerged as a technology to support individuals with partial motor functions, enhancing their ability to participate in daily activities. Unlike traditional rigid exoskeletons, exosuits offer a lighter, more flexible, and affordable solution that prioritizes user comfort and accessibility for everyday use. These qualities make exosuits versatile tools with potential for broad adoption across multiple applications. Based on actuation methodologies, exosuits are classified into cable-driven, pneumatic, twisted strings, and shape-memory alloy systems [ 1 ] . Recent advances in electric motor control and the flexible routing of cables have expanded cable-driven exosuits, which are currently the most widely adopted form [ 1 ] . Exosuits have been developed for both lower and upper limb assistance. Lower limb devices often actuate single joints, like the ankle [ 3 , 2 ] or hip [ 4 , 6 , 5 ] , and can also integrate multi-joint actuation for comprehensive support, such as hip-ankle [ 7 ] or hip-knee systems [ 8 , 9 , 10 ] . For upper limbs, exosuits typically have one or two actuated joints with a range of configurations to support various arm movements effectively. Examples include elbow flexion [ 11 ] , shoulder-elbow flexion [ 12 , 13 ] , wrist support [ 14 ] , and shoulder elevation [ 15 , 16 ] . Each of these examples has one or two degrees of freedom (DOF), referring to the number of actuators embedded in the exosuit. Each actuator can affect multiple joints and facilitate multidirectional movement based on tendon routing along the limb (Fig. 1 ). All portable cable-driven exosuits include an actuation system, referred to as tendon driver unit (TDU). This commonly houses electronics, motors, batteries, and one or more cables routed to flexible joint attachments. Despite notable progress, documentation and transparent sharing of exosuit TDU design, performance metrics, and benchmarks remain limited. This lack of detail impedes researchers and engineers from replicating existing systems, refining devices, and building on shared knowledge within the field. To address this gap, we outline benchmarking tests to evaluate performance. In addition to standard performance metrics, such as torque and velocity, we recommend further tests to assess noise, battery life, and thermal management, all critical considerations for portable exosuit applications suited for clinic or home use. Factors such as torque and velocity performance are important to evaluate because they fundamentally determine the range of anthropometrics that can be supported by the device (i.e., how heavy or tall the user is) and what types of movements may be performed (i.e. how fast one can lift the arm or walk). Factors such as noise, battery life, and thermal management are included as well as they are often overlooked, but also are necessary for device usability and acceptance. By sharing these methodologies, we aim to foster performance transparency and comparability within the exosuit field, facilitating improved design choices, accelerated advancements, and enriched technical documentation through accessible research and open-source repositories. 1 1 1 All design files and scripts for testing and data processing are available publicly: https://bitbucket.org/AdrianJEsser/icorr_2025_tdu/src/main/ Alongside the methodologies, we present a lightweight, adaptable TDU design with two DOF. This TDU supports multiple configurations, making it suitable for both upper and lower limb exosuits. It can be customized to accommodate different applications and user needs through modular features that enable the swapping of components to adjust battery capacity, voltage, and output torque, along with a flexible programming interface to support diverse performance and sensor requirements. Fig. 1: Three conceptual designs demonstrating examples of how a two DOF TDU may support multiple joints: (a) shoulder and elbow on one arm, (b) hip and/or knee on the legs, or (c) shoulder elevation on both arms. Fig. 2: An example of how the TDU can be mounted on the body in real life. In this application, the TDU is used, along with a textile interface, to support the right and left shoulder joints against gravity during shoulder elevation. II Tendon Driver Unit Design II-A Description of Components The main body of the TDU was 3D printed (Prusa MK4S) out of black polylactic acid (PLA) (Fig. 3 and Tab. I ). Other custom designed printed parts include the protective covers for the fans, the 30mm cable pulleys, the cover for the battery management system (BMS), and the cover for the battery module. The cover for the TDU was laser cut (Trotec Speedy 400) with 3mm thick transparent acrylic. The 7S1P battery pack (24V. nominal) is custom assembled from LG MJ1 18650 battery cells (3500mAh) and a 24V. 7S BMS (Vruzend). Controlling the TDU is a Raspberry Pi 4B (8Gb RAM) with a RTL881cu USB WiFi network card (PiShop.ch), allowing the TDU to simultaneously connect to a Wifi network and broadcast an independent access point. Power is provided to the microcontroller with a 5V 3A step down buck converter module (PiShop.ch). The regulated 5V module also powers the four PWM HighPi brushless fans (1.4CFM per fan, PiShop.ch), which pull in air from the side of the case, and expel it near the top by the motors. The TDU houses two U8 Lite L KV95 direct drive motors (1.5Nm rated torque, 3Nm peak torque, from MAB Robotics) which are controlled with MD80 brushless motor controller drives (MAB Robotics). Communication to the motors is performed over a controller area network (CAN) protocol with a CANdle hat for the Raspberry Pi (MAB Robotics). Fig. 3: Rendering of an exploded view of the TDU. The numbers correspond to the system components in Table I . TABLE I: Mass breakdown for all major components of the TDU. The numbering in the ID column corresponds to the labels in the exploded view presented in