Top on a smooth plane
Maria Przybylska, Andrzej J. Maciejewski · 2025
Read Top on a smooth plane by Maria Przybylska, Andrzej J. Maciejewski (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-17291.txt.
Introduction
Maria Przybylska and Andrzej J Maciejewski study a spinning top sliding on a perfectly smooth plane, in a 2025 paper. With no friction at its sharp tip, the top's motion follows clean maths. The question is when that motion can be fully solved, a trait called integrability.
With gravity acting, the sliding top can be solved only in two cases that mirror classic solvable tops. The proof leans on the fact that the sliding equations sit close to the classic ones, plus deep tests on related equations. Without gravity, the body must first be symmetric, and again only the same two cases survive. Adding a gyro term does not break those two cases. Other shapes are proven unsolvable in this strict sense.
Catalog record
| CREATOR | Maria Przybylska, Andrzej J. Maciejewski |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 118 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-17291
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Top on a smooth plane Maria Przybylska, Andrzej J. Maciejewski Abstract We investigate the dynamics of a sliding top that is a rigid body with an ideal sharp tip moving in a perfectly smooth horizontal plane, so no friction forces act on the body. We prove that this system is integrable only in two cases analogous to the Euler and Lagrange cases of the classical top problem. The cases with the constant gravity field with acceleration g ≠ 0 g\neq 0 and without external field g = 0 g=0 are considered. The non-integrability proof for g ≠ 0 g\neq 0 based on the fact that the equations of motion for the sliding top are a perturbation of the classical top equations of motion. We show that the integrability of the classical top is a necessary condition for the integrability of the sliding top. Among four integrable classical top cases the corresponding two cases for the sliding top are also integrable, and for the two remaining cases, we prove their non-integrability by analyzing the differential Galois group of variational equations along a certain particular solution. In the absence of constant gravitational field g = 0 g=0 the integrability is much more difficult. At first, we proved that if the sliding top problem is integrable, then the body is symmetric. In the proof, we applied one of the Ziglin theorem concerning the splitting of separatrices phenomenon. Then we prove the non-integrability of the symmetric sliding top using differential Galois group of variational equations except two the same as for g ≠ 0 g\neq 0 cases. The integrability of these cases is also preserved when we add to equations of motion a gyrostatic term. Declaration The final published version of the article is available at https://doi.org/10.1063/5.0200592 A rigid body, apart from the material point, is the most important model in classical mechanics that represents various physical systems. The analysis of the dynamics of a rigid body with one fixed point in the gravitational field, called the heavy top, has been a research problem for hundreds of years and a testing ground for which various methods have been used and gave impetus to the creation of new methods. This paper provides a complete integrability analysis of an almost forgotten top model with an ideal sharp tip that slides on a perfectly smooth horizontal plane in a constant gravity field. I Formulation of the problem and main result We consider the constrained motion of a rigid body in a constant gravity field. For the description of the problem, we use two orthonormal reference frames. The inertial frame \mathscr{F}=\{O,\boldsymbol{e}_{1},\boldsymbol{e}_{2},\boldsymbol{e}_{3}\} with origin at a point O , and axes defined by three unit orthogonal vectors \boldsymbol{e}_{i} satisfying the relation \boldsymbol{e}_{3}=\boldsymbol{e}_{1}\times\boldsymbol{e}_{2} . The body-fixed frame \mathcal{F}_{\mathcal{B}}=\{C,\boldsymbol{b}_{1},\boldsymbol{b}_{2},\boldsymbol{b}_{3}\} has its origin in the center of mass C of the body, and axes given by the unit orthogonal vectors \boldsymbol{b}_{i} fulfilling \boldsymbol{b}_{3}=\boldsymbol{b}_{1}\times\boldsymbol{b}_{2} . We will use the following convention. The coordinates of the vector \vec{z} in the inertial and body frames are denoted by \boldsymbol{z}=[z_{1},z_{2},z_{3}]^{T} , and by \boldsymbol{Z}=[Z_{1},Z_{2},Z_{3}]^{T} , respectively. That is z_{i}=\boldsymbol{z}\cdot\boldsymbol{e}_{i} and Z_{i}=\boldsymbol{z}\cdot\boldsymbol{b}_{i} , for i=1,2,3 . The orientation matrix \boldsymbol{A}=[A_{ij}] of the body frame relative to the inertial frame is defined by A_{ij}=\boldsymbol{e}_{i}\cdot\boldsymbol{b}_{j} for i,j=1,2,3 , so for an arbitrary vector \vec{z} we have \boldsymbol{z}=\boldsymbol{A}\boldsymbol{Z} . Clearly, with our definitions, we have \boldsymbol{A}^{T}\boldsymbol{A}=\operatorname{\mathrm{Id}} , and \det\boldsymbol{A}=+1 , so \boldsymbol{A}\in\mathrm{SO}(3,\mathbb{R}) . The time derivative of \boldsymbol{A}(t) is given by \dot{\boldsymbol{A}}=\boldsymbol{A}\widehat{\boldsymbol{\Omega}}, where \widehat{\boldsymbol{\Omega}}=\boldsymbol{A}^{T}\dot{\boldsymbol{A}}=-\dot{\boldsymbol{A}}^{T}\boldsymbol{A} is an antisymmetric matrix. The standard isomorphism of Lie algebra \mathbb{R}^{3} with cross product as the multiplication, and the Lie algebra \mathfrak{so}(3,\mathbb{R}) of antisymmetric matrices is given by \mathbb{R}^{3}\ni\boldsymbol{Z}\longmapsto\widehat{\boldsymbol{Z}}=\begin{bmatrix}0&-Z_{3}&Z_{2}\\ Z_{3}&0&-Z_{1}\\ -Z_{2}&Z_{1}&0\end{bmatrix}\in\mathfrak{so}(3,\mathbb{R}). (1) This isomorphism gives the vector \boldsymbol{\Omega} corresponding to the matrix \widehat{\boldsymbol{\Omega}} . It is the angular velocity of the body projected onto the body axes. Moreover, if \boldsymbol{z}=\boldsymbol{A}\boldsymbol{Z} , then \widehat{\boldsymbol{z}}=\boldsymbol{A}\widehat{\boldsymbol{Z}}\boldsymbol{A}^{T} , so \dot{\boldsymbol{A}}=\widehat{\boldsymbol{\omega}}\boldsymbol{A}, (2) where \boldsymbol{\omega}=\boldsymbol{A}\boldsymbol{\Omega} is the angular velocity in the inertial frame. If a vector \vec{z} is constant in the body frame, that is if \dot{\boldsymbol{Z}}=\boldsymbol{0} , then \dot{\boldsymbol{z}}=\frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\left(\boldsymbol{A}\boldsymbol{Z}\right)=\dot{\boldsymbol{A}}\boldsymbol{Z}=\widehat{\boldsymbol{\omega}}\boldsymbol{A}\boldsymbol{Z}=\widehat{\boldsymbol{\omega}}\boldsymbol{z}=\boldsymbol{\omega}\times\boldsymbol{z}. (3) Moreover, we also have \dot{\boldsymbol{z}}=\boldsymbol{A}\widehat{\boldsymbol{\Omega}}\boldsymbol{Z}. (4) The kinetic energy of the body T is T=\frac{m}{2}\dot{V}isionRes.\penalty\ \cdot\dot{V}isionRes.\penalty\ +\frac{1}{2}\boldsymbol{\Omega}\cdot\boldsymbol{I}\boldsymbol{\Omega}, (5) where m is the body mass, \boldsymbol{I} is its tensor of inertia and VisionRes.\penalty\ is the radius vector of its center of mass. The potential energy of the body is given by U=mg\boldsymbol{e}_{3}\cdot VisionRes.\penalty\ , (6) where g denotes the gravitational acceleration. Figure 1: Geometry of the system. Our aim is to study the dynamics of a rigid body with an ideal sharp tip that is constrained to move in a horizontal plane which is assumed to be perfectly smooth, so no friction forces are acting on the body. We will call this model the sliding top. The tip is a point Q fixed in the body. Let \boldsymbol{q}=\overrightarrow{OQ} be its radius vector, so we assume that \boldsymbol{q}=[q_{1},q_{2},0]^{T} . We also denote \boldsymbol{l}=VisionRes.\penalty\ -\boldsymbol{q} , see Fig. 1 . The point Q is fixed in the body, so \boldsymbol{L}=\boldsymbol{A}^{T}\boldsymbol{l} is a constant vector. The configuration of the system is given by a vector \boldsymbol{q} and the orientation matrix \boldsymbol{A} , so the configuration space is \mathbb{R}^{2}\times\mathrm{SO}(3,\mathbb{R}) . Because VisionRes.\penalty\ =\boldsymbol{q}+\boldsymbol{l} and \boldsymbol{q}\cdot\boldsymbol{e}_{3}=0 , we can rewrite the kinetic and potential energies in the form of T=\frac{m}{2}(\dot{\boldsymbol{q}}+\dot{\boldsymbol{l}})\cdot(\dot{\boldsymbol{q}}+\dot{\boldsymbol{l}})+\frac{1}{2}\boldsymbol{\Omega}\cdot\boldsymbol{I}\boldsymbol{\Omega},\qquad U=mg\boldsymbol{e}_{3}\cdot\boldsymbol{l}. (7) It is easy to notice that coordinates q_{1} and q_{2} are cyclic. The corresponding momenta p_{i}=m(\dot{q}_{i}+\dot{l}_{i}),\qquad i=1,2, are first integrals of the system (the horizontal velocity of the system center of mass is constant). Without loss of generality, we fix their values to zero. In effect, the reduced Lagrange function of the system is \mathcal{L}=\frac{1}{2}m{\left(\boldsymbol{e}_{3}\cdot\dot{\boldsymbol{l}}\right)}^{2}+\frac{1}{2}\boldsymbol{\Omega}\cdot\boldsymbol{I}\boldsymbol{\Omega}-mg\boldsymbol{e}_{3}\cdot\boldsymbol{l}. (8) Denoting \boldsymbol{\Gamma}=\boldsymbol{A}^{T}\boldsymbol{e}_{3} , and using the fact that \dot{\boldsymbol{l}}=\boldsymbol{\omega}\times\boldsymbol{l} , we can rewrite the Lagrange function ( 8 ) in the form \mathcal{L}=\frac{1}{2}\boldsymbol{\Omega}\cdot\boldsymbol{I}\boldsymbol{\Omega}+\frac{1}{2}m\left[\boldsymbol{\Gamma}\cdot(\boldsymbol{\Omega}\times\boldsymbol{L})\right]^{2}-mg\boldsymbol{\Gamma}\cdot\boldsymbol{L}. (9) Equations of motion have the form \begin{split}&\frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\left(\dfrac{\partial\mathcal{L}}{\partial\boldsymbol{\Omega}}\right)=\dfrac{\partial\mathcal{L}}{\partial\boldsymbol{\Omega}}\times\boldsymbol{\Omega}+\dfrac{\partial\mathcal{L}}{\partial\boldsymbol{\Gamma}}\times\boldsymbol{\Gamma},\\ &\frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\boldsymbol{\Gamma}=\boldsymbol{\Gamma}\times\boldsymbol{\Omega},\end{split} (10) see, [ 5 ] . Since \begin{split}&\frac{\partial\mathcal{L}}{\partial\boldsymbol{\Omega}}=\boldsymbol{I}\boldsymbol{\Omega}+m[\boldsymbol{\Omega}\cdot(\boldsymbol{L}\times\boldsymbol{\Gamma})](\boldsymbol{L}\times\boldsymbol{\Gamma}),\\ &\frac{\partial\mathcal{L}}{\partial\boldsymbol{\Gamma}}=m[\boldsymbol{\Gamma}\cdot(\boldsymbol{\Omega}\times\boldsymbol{L})](\boldsymbol{\Omega}\times\boldsymbol{L})-mg\boldsymbol{L},\end{split} (11) the explicit form of equations ( 10 ) is \begin{split}&\left[\boldsymbol{I}+m(\boldsymbol{L}\times\boldsymbol{\Gamma})\otimes(\boldsymbol{L}\times\boldsymbol{\Gamma})\right]\frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\boldsymbol{\Omega}=\boldsymbol{I}\boldsymbol{\Omega}\times\boldsymbol{\Omega}\\ &-m\left[(\boldsymbol{\Gamma}\times\boldsymbol{\Omega})\cdot(\boldsymbol{\Omega}\times\boldsymbol{L})+g\right](\boldsymbol{L}\times\boldsymbol{\Gamma}),\\ &\frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\boldsymbol{\Gamma}=\boldsymbol{\Gamma}\times\boldsymbol{\Omega},\end{split} (12) where \otimes denotes the outer product of vectors, see e.g. [ 20 , Ch. 1] . Equations ( 12 ) have first integrals \begin{split}&H=\frac{1}{2}\boldsymbol{\Omega}\cdot\boldsymbol{I}\boldsymbol{\Omega}+\frac{1}{2}m\left[\boldsymbol{\Gamma}\cdot(\boldsymbol{\Omega}\times\boldsymbol{L})\right]^{2}+mg\boldsymbol{\Gamma}\cdot\boldsymbol{L},\\ &F_{1}=\boldsymbol{\Gamma}^{2},\quad F_{2}=\boldsymbol{\Gamma}\cdot\boldsymbol{I}\boldsymbol{\Omega}.\end{split} (13) Let us introduce the angular momenta defined as \boldsymbol{M}=\frac{\partial\mathcal{L}}{\partial\boldsymbol{\Omega}}=\boldsymbol{J}\boldsymbol{\Omega},\quad\boldsymbol{J}=\boldsymbol{I}+m(\boldsymbol{L}\times\boldsymbol{\Gamma})\otimes(\boldsymbol{L}\times\boldsymbol{\Gamma}), (14) compare with formula (1.100) in [ 5 ] . Multiplying both sides of the first equation ( 11 ) by \boldsymbol{\Gamma} and by \boldsymbol{L} , we deduce that \begin{split}&\boldsymbol{M}\cdot\boldsymbol{\Gamma}=\boldsymbol{I}\boldsymbol{\Omega}\cdot\boldsymbol{\Gamma}=\boldsymbol{I}\boldsymbol{J}^{-1}\boldsymbol{M}\cdot\boldsymbol{\Gamma},\\ &\boldsymbol{M}\cdot\boldsymbol{L}=\boldsymbol{I}\boldsymbol{\Omega}\cdot\boldsymbol{L}=\boldsymbol{I}\boldsymbol{J}^{-1}\boldsymbol{M}\cdot\boldsymbol{L}.\end{split} (15) Using these identities we find the final form of equations of motion for the sliding top \begin{split}\frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\boldsymbol{M}&=\boldsymbol{M}\times\boldsymbol{J}^{-1}\boldsymbol{M}-mg\boldsymbol{L}\times\boldsymbol{\Gamma}\\ &+m\left[\boldsymbol{\Gamma}\cdot(\boldsymbol{J}^{-1}\boldsymbol{M}\times\boldsymbol{L})\right]\left((\boldsymbol{J}^{-1}\boldsymbol{M}\times\boldsymbol{L})\times\boldsymbol{\Gamma}\right),\\ \frac{\mathrm{d}\phantom{t}}{\mathrm{d}\mspace{1mu}t}\boldsymbol{\Gamma}&=\boldsymbol{\Gamma}\times\boldsymbol{J}^{-1}\boldsymbol{M}.\end{split} (16) Figure 2: Another realization of the system. Let us notice that the same equations of motion have another system: a ball with a displaced center of mass relative to its geometric center, sliding on a smooth horizontal plane. The difference is that unlike as is for a top, there are no falling trajectories. The analogy between these two systems from the point of view of permanent rotations was noted in [ 3 ] . Indeed, if the ball has radius a , then according to geometry presented in Fig. 2 the radius vector of the center of mass is VisionRes.\penalty\ =\boldsymbol{q}+a\boldsymbol{e}_{3}+\boldsymbol{l}, hence \dot{V}isionRes.\penalty\ =\dot{\boldsymbol{q}}+\dot{\boldsymbol{l}} , and U=mg\boldsymbol{e}_{3}\cdot VisionRes.\penalty\ =mg\boldsymbol{e}_{3}\cdot\boldsymbol{l} , where we omitted the constant term mga . Thus, the kinetic T and potential U energies