Broadband Kinetic-Inductance Parametric Amplifiers with Impedance Engineering

Chih-Chiao Hung, Hiroki Kutsuma, Chung Wai Sandbo Chang, Arjan Ferdinand van Loo, Yasunobu Nakamura · 2025

Read Broadband Kinetic-Inductance Parametric Amplifiers with Impedance Engineering by Chih-Chiao Hung, Hiroki Kutsuma, Chung Wai Sandbo Chang, Arjan Ferdinand van Loo, Yasunobu Nakamura (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-17145.txt.

Introduction

Chih-Chiao Hung and co-authors present a 2025 design for a broadband amplifier used in quantum devices. Such amplifiers must boost faint signals without adding much noise. A trade-off between gain and bandwidth has long limited them. Resonator-based designs are simple to make but demanded very low impedance, and hence huge capacitors. They had also only been built with aluminum junctions, which fail in heat or strong magnetic fields. The team proposes a three-stage impedance transformer to ease those limits.

Their plan aims to lift the target impedance for the nonlinear resonator. Higher impedance means smaller capacitors and an easier build. It may also open the door to junction materials beyond aluminum. That would let the amplifiers work in harsher settings. The paper sets out the design and its expected gains. Devices of this kind serve quantum computing and sensing rigs.

Catalog record

CREATORChih-Chiao Hung, Hiroki Kutsuma, Chung Wai Sandbo Chang, Arjan Ferdinand van Loo, Yasunobu Nakamura
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE90 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-17145

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Broadband Kinetic-Inductance Parametric Amplifiers with Impedance Engineering Chih-Chiao Hung, Hiroki Kutsuma, Chung Wai Sandbo Chang, Arjan Ferdinand van Loo, Yasunobu Nakamura Abstract Broadband quantum-limited parametric amplifiers (PAs) are essential components in quantum information science and technology. Impedance-engineered resonator-based PAs and traveling-wave PAs are the primary approaches to overcome the gain–bandwidth constraint. While the former PAs are simpler to fabricate, the target characteristic impedance Z NR Z_{\mathrm{NR}} of the nonlinear resonator has been restricted to be below 10 Ω \Omega , requiring large capacitance. Moreover, these PAs have only been implemented with aluminum-based Josephson junctions (JJs), hindering their operation at high temperatures or strong magnetic fields. To address these issues, we propose a three-stage impedance-transformer scheme, showcased with a 20-nm-thick, 250-nm-wide high-kinetic-inductance niobium-titanium-nitride (NbTiN) film. Our scheme enables Z NR Z_{\mathrm{NR}} up to several tens of ohms—a tenfold improvement over conventional designs, achieved through an additional quarter-wavelength transmission line with the characteristic impedance of 180 Ω \Omega . Our kinetic-inductance impedance-engineered parametric amplifiers (KIMPA), featuring a 330-fF shunt capacitor, demonstrate a phase-preserving amplification with a 450-MHz bandwidth at 17-dB gain, and an added noise ranging from 0.5–1.3 quanta near the center frequency of 8.4 GHz. Due to the high critical current of the NbTiN nanowire, the KIMPA also achieves an output saturation power of up to − - 51 ± \pm 3 dBm, approximately 25-dB higher than that of JJ-based PAs. This scheme also opens new possibilities for other three-wave-mixing building blocks. I Introduction Quantum-noise-limited microwave parametric amplifiers (PAs), which exploit parametric photon conversion, have become indispensable for sensitive quantum device readouts in multiple scientific fields [ 62 , 14 , 34 , 3 ] . Their effectiveness stems from the strategic placement at the first signal-amplification stage, typically located at the lowest temperature, while providing sufficient gain to overcome noise from subsequent stages including high-electron-mobility-transistor (HEMT) amplifiers. These PAs have significantly enhanced qubit-state discrimination in superconducting quantum information research [ 34 , 26 ] and enabled the detection of previously indiscernible weak signals in high-sensitivity spin resonance experiments [ 5 , 18 , 63 ] , itinerant single microwave photons [ 19 , 36 ] , and dark matter searches of axions [ 4 , 8 , 1 ] . With the progression of quantum computing toward fault-tolerant systems that necessitate concurrent multi-qubit readout [ 26 , 59 ] and error correction [ 15 , 70 ] , there is an increasing demand for next-generation PAs with attributes of low added noise, wide bandwidth, and high saturation power. Al-AlO x -Al Josephson junctions (JJs) have long served as amplifying elements [ 68 ] , offering controllable nonlinearity through oxidation conditions. Although JJ-based PAs demonstrate near-ideal quantum efficiency [ 11 , 67 , 53 ] , they are limited to operation below the critical temperature T_{\mathrm{c}} of aluminum and in low magnetic fields. Moreover, their input 1-dB compression power P_{1\mathrm{dB}}^{\mathrm{in}} ranges from -100 to -93 dBm or the output saturation power of approximately -75 dBm [ 34 , 20 , 28 ] due to relatively low critical currents and higher-order nonlinearities [ 7 ] , presenting challenges for simultaneous readouts of tens of qubits [ 52 ] . In contrast, kinetic-inductance (KI) materials such as NbN and NbTiN offer distinct advantages: high operating temperature [ 27 , 37 , 22 ] due to high T_{\mathrm{c}} [ 71 ] and high P_{1\mathrm{dB}}^{\mathrm{in}} ( - 65 to - 55 dBm) [ 27 , 6 , 56 , 46 ] attributed to larger critical currents compared to JJs [ 64 ] . Additionally, their larger superconducting gaps [ 35 , 44 , 22 ] enable better performance in strong magnetic fields [ 54 , 63 ] and potentially higher operating temperatures and frequencies. Generally, the lower intrinsic nonlinearity of KI materials [ 46 ] necessitates higher pump powers to achieve comparable bandwidth and gain to JJ-based designs. As such, JJ-based PAs might be better for some applications, while the choice between JJ- and KI-based PAs involves operating conditions, required dynamic ranges, and pump-power constraints, making these trade-offs crucial for amplifier design. The pioneering PA generations exhibited a fixed gain–bandwidth product (GBWP) [ 11 , 67 ] , where increased gain came at the cost of reduced operational frequency range (bandwidth). Recent efforts to overcome this limitation have followed two main approaches. Traveling-wave parametric amplifiers (TWPAs), utilizing thousands of nonlinear unit cells as transmission lines, have achieved bandwidths approaching 4 GHz [ 6 , 34 ] . However, they suffer from gain ripples due to the impedance mismatches [ 6 , 21 ] and exhibit relatively low quantum efficiency compared to conventional PAs due to the higher dissipation of lossy dielectrics [ 47 ] . An alternative approach utilizes passive networks like Klopfenstein tapers [ 42 , 33 , 65 , 49 ] or impedance transformers [ 53 , 25 , 20 , 51 , 43 ] to reduce the external quality factor of lumped-element nonlinear oscillators, which operate in the reflection mode and require circulators. These designs, demanding minimal fabrication resources, attain flat-top gain profiles with small ripples and near-quantum-limited noise performance. However, these impedance-engineered PAs typically require large shunt capacitances of several picofarads and sometimes employ parallel-plate capacitors with possible additional loss from the dielectrics [ 42 , 53 , 25 ] (see Appendix F ). Furthermore, they are limited to JJs rather than KI materials. We compare different reflection-type JJ-based broadband PAs along with narrowband KI PAs in Appendix A . Here, we propose an impedance-engineering scheme using a three-stage impedance transformer [Fig. 1 (a)] to reduce the shunt capacitance to a few-hundred femtofarads while achieving a wide bandwidth and maintaining a simple fabrication recipe. We demonstrate this approach using a NbTiN thin film and discuss its nonlinear properties in Sec. III , along with fabrication details in Sec. IV . Performance of the KI-based impedance-engineered PA (KIMPA) is presented in Sec. V : 17-dB signal gain, 450-MHz bandwidth, - 51 \pm 3-dBm output saturation power, and 0.5–1.3-quanta added noise. Figure 1: (a) Circuit diagram of our kinetic-inductance impedance-engineered parametric amplifier (KIMPA). The three-stage impedance transformer, consisting of two quarter-wavelength ( \lambda/4 ) and one half-wavelength ( \lambda/2 ) transmission lines, broadens the bandwidth of the nonlinear resonator (NR) consisting of a shunt capacitor and a modulated inductor L(t) . The resonance of NR is close to the resonance of the \lambda/2 line. (b) Equivalent time-independent circuit diagram. The amplification ABCD matrix describes the relationship of signal and idler currents, sent from the left and the right, respectively. The signal (blue) and the idler (lavender) segments undergo frequencies of \omega_{\mathrm{s}} and -\omega_{\mathrm{i}} , respectively. (c) Schematic diagram of (a) on the right and the experimental setup on the left. The signal path incorporates a bias tee for the dc-current ( I_{\mathrm{dc}} ) injection and a diplexer for combining the signal and pump. The device is fabricated using two materials, NbTiN (red) and aluminum (gray). The nonlinear resonator has a characteristic impedance Z_{\mathrm{NR}} . II Three-stage Impedance transformer The nonlinearity of PAs under pumped conditions can be modeled by treating the impedance of the nonlinear element (typically an inductor) as a purely imaginary component in parallel with an effective negative resistance [ 60

Read the complete text