Radiometer Calibration using Machine Learning
S. A. K. Leeney, H. T. J. Bevins, E. de Lera Acedo, W. J. Handley, C. Kirkham, R. S. Patel, J. Zhu, D. Molnar, J. Cumner, D. Anstey, K. Artuc, G. Bernardi, M. Bucher, S. Carey, J. Cavillot, R. Chiello, W. Croukamp, D. I. L. de Villiers, J. A. Ely, A. Fialkov, T. Gessey-Jones, G. Kulkarni, A. Magro, · 2025
Read Radiometer Calibration using Machine Learning by S. A. K. Leeney, H. T. J. Bevins, E. de Lera Acedo, W. J. Handley, C. Kirkham, R. S. Patel, J. Zhu, D. Molnar, J. Cumner, D. Anstey, K. Artuc, G. Bernardi, M. Bucher, S. Carey, J. Cavillot, R. Chiello, W. Croukamp, D. I. L. de Villiers, J. A. Ely, A. Fialkov, T. Gessey-Jones, G. Kulkarni, A. Magro, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-16791.txt.
Introduction
Leeney and a large team of co-authors teach machines to calibrate radio telescopes in a 2025 paper. Radiometers turn sky radiation into electric signals, and the receiver chain bends those signals. A mismatch where antenna meets amplifier adds reflections and warps.
The classic fix flips the input between sky and a known source, a method called Dicke switching. The team instead trains neural networks on known signals to model the whole chain. Learned models can capture bends that formulas miss. The stakes are high: one target is the faint 21-centimetre glow from the early universe. Cleaner calibration could decide whether that whisper is heard at all.
Catalog record
| CREATOR | S. A. K. Leeney, H. T. J. Bevins, E. de Lera Acedo, W. J. Handley, C. Kirkham, R. S. Patel, J. Zhu, D. Molnar, J. Cumner, D. Anstey, K. Artuc, G. Bernardi, M. Bucher, S. Carey, J. Cavillot, R. Chiello, W. Croukamp, D. I. L. de Villiers, J. A. Ely, A. Fialkov, T. Gessey-Jones, G. Kulkarni, A. Magro, |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 62 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-16791
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Radiometer Calibration using Machine Learning S. A. K. Leeney, H. T. J. Bevins, E. de Lera Acedo, W. J. Handley, C. Kirkham, R. S. Patel, J. Zhu, D. Molnar, J. Cumner, D. Anstey, K. Artuc, G. Bernardi, M. Bucher, S. Carey, J. Cavillot, R. Chiello, W. Croukamp, D. I. L. de Villiers, J. A. Ely, A. Fialkov, T. Gessey-Jones, G. Kulkarni, A. Magro, P. D. Meerburg, S. Mittal, J. H. N. Pattison, S. Pegwal, C. M. Pieterse, J. R. Pritchard, E. Puchwein, N. Razavi-Ghods, I. L. V. Roque, A. Saxena, K. H. Scheutwinkel, P. Scott, E. Shen, P. H. Sims, M. Spinelli Abstract Radiometers are crucial instruments in radio astronomy, forming the primary component of nearly all radio telescopes. They measure the intensity of electromagnetic radiation, converting this radiation into electrical signals. A radiometer’s primary components are an antenna and a Low Noise Amplifier (LNA), which is the core of the “receiver” chain. Instrumental effects introduced by the receiver are typically corrected or removed during calibration. However, impedance mismatches between the antenna and receiver can introduce unwanted signal reflections and distortions. Traditional calibration methods, such as Dicke switching, alternate the receiver input between the antenna and a well-characterised reference source to mitigate errors by comparison. Recent advances in Machine Learning (ML) offer promising alternatives. Neural networks, which are trained using known signal sources, provide a powerful means to model and calibrate complex systems where traditional analytical approaches struggle. These methods are especially relevant for detecting the faint sky-averaged 21-cm signal from atomic hydrogen at high redshifts. This is one of the main challenges in observational Cosmology today. Here, for the first time, we introduce and test a machine learning-based calibration framework capable of achieving the precision required for radiometric experiments aiming to detect the 21-cm line. 1 Introduction Radiometers have been integral to the field of radio astronomy since its inception. They measure the intensity of incoming electromagnetic radiation within a specific frequency band, producing a proportional electrical signal at their output. Typically, a radiometer consists of a radio antenna that captures the radiant energy and an amplifying device such as a Low Noise Amplifier (LNA) which, in combination with several other components described in Section 4.1 , is commonly referred to as the “receiver”. The incident electromagnetic radiation induces a voltage across the antenna, which can be interpreted as Johnson-Nyquist noise representative of the sky temperature (T_{\text{sky}}) Nyquist (1928) . For cosmological applications, particularly those aiming to detect faint signals like the sky-averaged 21-cm line of neutral hydrogen, this initial voltage signal is too weak to be directly interpreted. The signal must therefore be amplified by the receiver before it can be measured. This amplification modifies the signal non-linearly across frequencies, introducing a multiplicative gain factor, g , and an additive receiver noise term, T_{\text{rec}} . It is typically very difficult to know these two values a priori, which motivates the need for external references or calibration sources to constrain them. The relationship between the measured output power and the input temperature from a source can be modelled as \mathcal{P}_{\text{src}}^{\text{out}}=gM(T^{\text{in}}_{\text{sky}}+T_{\text{rec}}), (1) where M (defined in Section 4 ) is the mismatch factor. This equation highlights how the measured power depends on both the intrinsic properties of the source and the receiver’s internal noise and impedance mismatch. Mismatches between the impedances of the antenna and receiver result in partial reflections of both the power incoming from the sky and the noise power generated by the amplifier, shown in Figure 1 . These reflections can lead to standing waves and other spectral distortions in the measured output power that complicate the interpretation of the signal. These are typically referred to as “systematics”. Figure 1 : A schematic overview explaining the core challenge in radiometer calibration. An impedance mismatch between the receiver and the source (usually a radio antenna) causes standing waves between the receiver and source. This adds power to the output signal and must be corrected for via calibration. \Gamma_{A} and \Gamma_{\text{rec}} represent the reflection coefficient of the antenna and the receiver and P_{\text{src}}^{\text{out}} is the measured power. Throughout the paper, green and orange represent “inputs” and “outputs”, which will be described in detail in Section 4.1 . Temporal instabilities in the receiver electronics amplify these challenges, introducing perturbations in the signal that are hard to calibrate. Although integrating time and frequency data can help mitigate random or radiometric noise, eliminating the systematic effects demands accurate calibration. Consequently, the accuracy of the radiometer calibration is crucial for converting the measured amplified signal Wyatt (2012) back to the true emission from the source captured by the antenna. A particular application of radiometers in astronomy is in the measurement of relative (chromatic or spectral) distortions and of the absolute value of the temperature spectrum from a given celestial source. A classical example of this is the measurement of the Cosmic Microwave Background Durrer (2020) . The aforementioned calibration challenges are particularly significant when aiming to detect the extremely faint 21-cm cosmological signal from atomic hydrogen at high redshift. This signal is expected to be a few tens or hundreds of milli-Kelvin in amplitude, which is 4–5 orders of magnitude dimmer than the foregrounds that obscure the signal Pritchard and Loeb (2010) . Radiometers also have multiple uses beyond astronomy and science, being the integral part of many radio receiving systems in fields such as communications Battaglia et al. (2017) , medical instrumentation Arunachalam et al. (2008) and radar technology Battaglia et al. (2017) . Receiver calibration methods can be subdivided into two primary categories. First, there are methods where the calibration “known” source is external to the antenna, such as a radio galaxy of known brightness. Second, there are methods where the calibration source is internal and typically connected to the input of the receiver, such as a load resistance. Although the internal approach is less optimal, it is often the only possibility in many applications. For example, when a large field of view prevents dedicated observation of a single external source. One can also classify receiver calibration methods based on whether they aim to eliminate the effects of the receiver blindly or by fitting a model of the receiver using measured data. Traditional calibration methods used in radio astronomy include techniques such as “Dicke-switching” Dicke (1946) . In Dicke-switching, the receiver input is continuously switched between the antenna and a reference noise source of constant noise power, which helps mitigate gain fluctuations and receiver noise. Another approach involves using a correlator to reduce the impact of uncorrelated random and systematic noise powers. A well-known alternative is the method known as noise or tone injection Corbella et al. (2000) , where a strong calibration signal is added to the main sky signal without the need to switch the receiver from the antenna to a calibration source. For noise or tone injection to work effectively, the injected calibration signal must be of sufficiently high power relative to the ambient noise and the weak astronomical emissions you are trying to measure. If the astronomical signals are extremely faint, the calibration signal may need to be set at a level that is unrealistically high compared to the noise floor. Such high power levels can be