300 ๐› \boldsymbol{\upmu} s optical cavity storage time and ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ• \mathbf{10^{-7}} active RAM cancellation for ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ๐Ÿ— \mathbf{10^{-19}} laser frequency stabilisation Journal: opticajournal

Adam L. Parke, Marco Schioppo ยท 2025

Read 300 ๐› \boldsymbol{\upmu} s optical cavity storage time and ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ• \mathbf{10^{-7}} active RAM cancellation for ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ๐Ÿ— \mathbf{10^{-19}} laser frequency stabilisation Journal: opticajournal by Adam L. Parke, Marco Schioppo (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-16731.txt.

Introduction

Laser frequency can be held steady at an extreme level with a long optical cavity, Adam Parke and Marco Schioppo report in a 2025 letter. Locking a laser to a reference cavity is a well established route to top stability. Cavities give a strong discrimination signal, and modulation methods extract that signal with low noise for the feedback loop that holds the laser in place.

A cavity sixty-eight centimeters long stores light for three hundred microseconds, which yields very high frequency discrimination. The team also built a simple, robust scheme to cancel residual amplitude modulation in a waveguide modulator, reaching a very low level. Together the two advances unlock fractional frequency stability in the range the title states.

Catalog record

CREATORAdam L. Parke, Marco Schioppo
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-16731

Browse the full library ยท About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

300 ๐› \boldsymbol{\upmu} s optical cavity storage time and ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ• \mathbf{10^{-7}} active RAM cancellation for ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ๐Ÿ— \mathbf{10^{-19}} laser frequency stabilisation Journal: opticajournal Adam L. Parke, Marco Schioppo Abstract Frequency stabilisation of lasers to optical reference cavities is an established method to achieve state-of-the-art stability. The strengths of this method are the high discriminator coefficient of optical cavities, and the low-noise extraction of the stabilisation signal using modulation techniques. In this Letter we report beyond state-of-the-art performance on both of these fundamentals, unlocking ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ๐Ÿ— \mathbf{10^{-19}} fractional frequency laser stabilisation. We employ a ๐Ÿ”๐Ÿ– \mathbf{68}\, cm long cavity to realise an optical storage time of 300 ๐› \boldsymbol{\upmu} s, achieving ultrahigh frequency discrimination. We develop a simple and robust scheme to actively cancel residual amplitude modulation (RAM) at the ๐Ÿ๐ŸŽ โˆ’ ๐Ÿ• \mathbf{10^{-7}} level in an annealed-proton-exchanged lithium-niobate waveguide electro-optic-modulator (EOM). Cavity-stabilised lasers provide state-of-the-art instability, with recent demonstrations now below the 10^{-16} fractional frequency level [ 1 , 2 , 3 , 4 ] , which makes them key tools of modern optical frequency metrology, with applications ranging from optical atomic clocks [ 5 ] to high precision spectroscopy [ 6 ] and gravitational wave detection [ 7 ] . Such performance is derived by the length stability of the optical reference cavities and crucially by the fidelity of the stabilisation technique used to transfer fractional cavity-length variation into laser fractional frequency fluctuation. Modulation methods have been developed to achieve the needed high fidelity so that the information for the stabilisation is encoded at a modulation frequency and 1/f and intensity noise can be suppressed. Among them, the Pound-Drever-Hall (PDH) technique [ 8 , 9 ] has been widely used as it relies on phase modulation, which can be realised with low technical noise, enabling stabilisation at the photon-shot-noise limit of the photodetector (PD). With cavity-stabilised lasers now capable of frequency instability below 10^{-16} , small but finite technical noise introduced by phase modulators needs to be taken into account. In a phase modulator, a ferroelectric crystal (typically lithium niobate) is used to induce a modulation of the refractive index when an electric RF field is applied (Pockels electro-optic effect). In practice a number of effects in the EOM concurrently play into producing an undesired residual amplitude modulation (RAM) [ 10 , 11 ] , which depends on the polarisation of the light, degrading the overall fidelity of the stabilisation and therefore of the laser stability. The susceptibility to RAM also depends on the frequency discriminator coefficient of the optical cavity, as summarised by \frac{\Delta f_{\text{RAM}}}{f_{\text{L}}}=\frac{\Delta V_{\text{PDH RAM}}}{V_{\text{PDH PP}}}\times\frac{1}{\mathcal{D}}\>\>\>\text{with}\>\>\>\mathcal{D}\propto\tau_{\text{cav}}\,, (1) where \Delta f_{\text{RAM}} is the RAM-induced frequency deviation imposed on the laser (with frequency f_{\text{L}} ), \Delta V_{\text{PDH RAM}} the RAM-induced voltage variation of the PDH error signal, V_{\text{PDH PP}} the voltage amplitude of the PDH error signal peak-to-peak, and \mathcal{D} the optical cavity normalised discriminator coefficient. Hence, long optical storage time reduces the impact of RAM-induced instability of the PDH error signal on the laser frequency. Previous work focused on reducing the RAM of the EOM, with passive [ 12 , 13 , 14 , 15 ] or active [ 10 , 11 , 16 , 17 , 18 ] methods and with marginal consideration for maximisation of the cavity optical storage time. The lowest levels of RAM were achieved with active RAM compensation implemented on free-space lithium-niobate based modulators [ 16 ] and in fibre-coupled Ti-indiffused waveguides [ 18 ] . EOM-free [ 19 , 20 ] and fibered [ 21 ] implementations were also proposed. Figure 1: Experimental scheme for active RAM cancellation and characterisation. The red (grey) lines represent the free-space optical path (electronic connections) and fibre connections are labeled "fibre". V_{\text{RF}} ( V_{\text{bias}} ) is the RF modulation signal (bias voltage for RAM stabilisation) applied to the EOM. M are mirrors, ISO are free-space optical isolators, L are lenses, PBS is a polarising beam splitter, BS is a beam splitter, PD are photodetectors, \lambda/4 is a quarter-wave plate and \lambda/2 is a half-wave plate. {\varphi}_{\text{PDH}} and {\varphi}_{\text{RAM}} are passive RF delay lines to fine tune the phase. The plot in orange shows the extracted PDH error signal and the one in blue shows the signal from the transmission PD, both as a function of the laser frequency as it sweeps across the cavity resonance. In this Letter we focus on reducing the RAM-induced fractional frequency deviation \Delta f_{\text{RAM}}/f_{\text{L}} by actively canceling the RAM at its source (the EOM) and specialising the optical cavity design to enhance the optical storage time. Our approach to mitigating the RAM effect at its source can be summarised as follows: (i) reduce the RAM spatial inhomogeneity, (ii) limit etalon effects, (iii) compensate for the birefringence of the EOM crystal. We address these points by employing a fibre coupled, angled-cut, annealed-proton-exchanged (APE) and x-cut lithium-niobate waveguide EOM (Jenoptik PM1550b100 [ 22 ] ). Fibre coupling provides spatial homogenisation of the RAM through propagation inside the fibre. This makes waveguide EOMs more suitable for large beam size cavities and the alignment on PDH and RAM PDs less critical. The angled-cut waveguide provides attenuation of etalon effects [ 23 ] . Contrary to the Ti-indiffused type, the APE waveguide only lets through one polarization [ 23 ] , suppressing the co-existence in the waveguide of two polarisations that, experiencing different phase-shifts, can generate RAM downstream. The x-cut crystal ensures a uniform RF field in the waveguide [ 23 ] . The use of a waveguide EOM enables us to compensate for the birefringence of the EOM crystal with a phase shift obtained by applying an external low voltage bias field ( V_{\text{bias}} \simeq 1\, V). The experimental setup for this active RAM cancellation scheme is shown in Fig. 1 . Light from a 1542\, nm laser is fibre coupled into the waveguide EOM, which is followed by a fibre coupled acousto-optic-modulator (AOM) that is employed for optical power stabilisation and optical isolation. From the AOM, light is fibre out-coupled into free space, encountering an additional stage of optical isolation and a 50\,\% power beam splitter, so that two optical branches are produced, one for stabilisation of optical power and RAM, and the other for PDH locking and out-of-loop RAM measurement. Etalon effects arising from spurious reflections from the PDs are suppressed by optical isolators placed on each branch. An RF local oscillator (LO) synthesiser with f_{\text{LO}}=20\, MHz drives the EOM. RF branches at f_{\text{LO}} are sent to two frequency mixers, to extract the PDH and RAM stabilisation error signals, respectively. A third PD is placed at the transmission of the optical cavity to measure the intracavity storage time and modulation depth. The latter is estimated from the amplitude ratio between the modulation sidebands and carrier frequency f_{\text{c}} and is set at 15\,\% , as a trade-off value to generate a sufficiently large PDH error signal and to limit the magnitude of sidebands at higher f_{\text{LO}} harmonics. Passive RF delay lines are used to tune the phases \varphi_{\text{PDH}} and \varphi_{\text{RAM}} to maximise the PDH error signal peak-to-peak and the effectiveness of the RAM cancellation, respectively. The error signal generated by the RAM mixer is processed by a loop filter

Read the complete text