The Effect of Hydration and Dynamics on the Mass Density of Single Proteins
C.C.W. McAllister, L.S.P. Rudden, E.H.C. Bromley, M.T. Degiacomi · 2025
Read The Effect of Hydration and Dynamics on the Mass Density of Single Proteins by C.C.W. McAllister, L.S.P. Rudden, E.H.C. Bromley, M.T. Degiacomi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-14983.txt.
Introduction
Cameron McAllister, Lucas Rudden, Elizabeth Bromley, and Matteo Degiacomi measure the mass density of single proteins with water in the count. Their paper is from two thousand twenty-five; the pack row gives no title or year, so the text head is the source. Density is a key trait in many lab methods, and a long-cited value may be too high.
Their method runs motion simulations to find the volume a protein shuts water out of. Across hundreds of soluble proteins, the mean density lands below the classic value. Size does not drive it; residue mix does, most of all the share of water-shy amino acids. A trained tool can call density from sequence traits alone. Water shells near the surface run denser than bulk water.
Catalog record
| CREATOR | C.C.W. McAllister, L.S.P. Rudden, E.H.C. Bromley, M.T. Degiacomi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 45 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-14983
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
The Effect of Hydration and Dynamics on the Mass Density of Single Proteins Preprint: AIP/123-QED C.C.W. McAllister, L.S.P. Rudden, E.H.C. Bromley, M.T. Degiacomi Abstract I Abstract The density of a protein molecule is a key property within a variety of experimental techniques. We present a computational method for determining protein mass density that explicitly incorporates hydration effects. Our approach uses molecular dynamics simulations to quantify the volume of solvent excluded by a protein. Applied to a dataset of 260 soluble proteins, this yields an average density of 1.296 ± \pm 0.001 g cm -3 , notably lower than the widely cited value of 1.35 g cm -3 . Contrary to previous suggestions, we find no correlation between protein density and molecular weight. We instead find correlations with residue composition, particularly with hydrophobic amino acid content. Using these correlations, we train a regressor capable of accurately predicting protein density from sequence-derived features alone. Examining the effect of incorporating water molecules on the measured density, we find that water molecules buried in internal cavities have a negligible effect, whereas those at the surface have a profound impact. Furthermore, by calculating the density of a titin domain and of the Bovine Pancreatic Trypsin over molecular dynamics trajectories, we show that individual proteins can occupy states with close but distinguishable densities. Finally, we analyse the density of water in the vicinity of proteins, showing that the first two hydration shells exhibit higher density than bulk water. When included in cumulative density calculations, these hydration layers contribute to a net increase in local solvent density. Overall, we find that proteins are less dense than previously reported, which is offset by their ability to induce a higher density of water in their vicinity. pacs 87.15.kr II Introduction Protein mass density — the density of an individual protein molecule — is an important fundamental biophysical quantity relevant to a wide range of experimental techniques, including X-ray crystallography and ultracentrifugation studies of protein oligomers Chetri, Khan, and Tripathi 2022 . Additionally, the precise determination of protein and solvent densities is relevant to methods for which the local dielectric permittivity is experimentally implicated, including Extraordinary Acoustic Raman Spectroscopy (EARS) Wheaton, Gelfand, and Gordon 2015 . The protein mass density has been approximated since at least the late 1960s Matthews 1968 to be effectively a constant independent of the protein’s size, shape, or other physical characteristics, a consequence of the closely packed interiors of proteins Erickson 2009 . Specifically, a value of 1.35 g cm -3 has been commonly used Andersson and Hovmöller 1998 based on early compressibility Gekko and Noguchi 1979 and sedimentation Squire and Himmel 1979 studies, though various values deriving from experimental and theoretical approaches have been proposed. Key to the calculation of protein density is the calculation of the protein volume. There are many different definitions of protein volume, including: the geometric volume, which is the solvent-excluded volume enclosed within the solvent-excluded surface Greer and Bush 1978 , also known as the molecular surface volume Chen and Makhatadze 2015 ; the van der Waals volume, the volume of overlapping spheres representing the van der Waals radii of each constituent atom of the protein Lee and Richards 1971 ; and the solvent-accessible volume, the volume enclosed by the solvent-accessible surface area (SASA) Richmond 1984 . This work is concerned with the molecular surface volume. This is the relevant measure of volume occupied by a protein for experiments which depend on changes in the local permittivity of proteins in solvent (e.g., EARS). While protein mass density is often taken as a constant, in 2004 Fischer et al. Fischer, Polikarpov, and Craievich 2004 examined previously published experimental Squire and Himmel 1979 ; Gekko and Noguchi 1979 and theoretical Quillin and Matthews 2000 ; Tsai et al. 1999 ; Andersson and Hovmöller 1998 estimates of protein densities and concluded that for relatively small proteins (below 20 kDa) protein density is molecular weight dependent, in an inverse exponential relationship. The authors further proposed that, for larger proteins, a constant value of 1.410(6) g cm -3 should be considered. Theoretical calculations of protein density used in the meta-analysis of Fischer et al. were performed on crystal structures almost completely devoid of water molecules using Voronoi Tessellation methods (Andersson and Hovmöller, 1998 Andersson and Hovmöller 1998 ; Tsai et al. , 1999 Tsai et al. 1999 ; Quillin and Matthews, 2000 Quillin and Matthews 2000 ). These techniques provide analogous approximations of a dry molecular surface volume. Crucially though, water molecules form hydration shells around proteins, whereby coordinated waters essentially behave as an integral part of the protein Vinh, Allen, and Plaxco 2011 . The specific distribution of conformational states of protein side chains depends on their complex interactions with these water molecules, thus the evaluation of protein-water dynamics is required to accurately calculate protein volume. Water-protein interactions play key structural roles in proteins, driving their organisation and flexibility, and ultimately impacting upon their function Martini et al. 2013 ; Biedermannová and Schneider 2016 . For this reason, computational methods that can accurately incorporate hydration into the calculation of protein density would be advantageous. Multiple methods to calculate the molecular surface volume exist including analytic methods like MSMS (Michel Sanner’s Molecular Surface), which can compute the molecular surface volume via a procedure that relies on the reduced surface Sanner, Olson, and Spehner 1996 , and explicit surface representation methods like LSMS (Level Set method for Molecular Surface generation), which uses a level-set front-propagation method Can, Chen, and Wang 2006 . Inferring protein volumes from their amino acid sequence, with the volume calculated as the sum of the volumes of the constituent amino acids, has also been shown to produce remarkably accurate results Hutt, Kulschewski, and Pleiss 2012 . A recent study of the partial specific volumes of proteins, the inverse of the protein density in solution, using this method has calculated a theoretical mean value for all human proteins of 0.735 mlg -1 with a standard deviation of 0.010 mlg -1 , equivalent to 1.36 \pm 0.03 g cm -3 , and an approximately Gaussian distribution Zhao, Brown, and Schuck 2011 . However, none of these methods account for the effects of the protein’s hydration shell. Furthermore, the partial specific volume is a macroscopic experimentally observable quantity from which the mass density of individual protein molecules cannot necessarily be simply derived. Previous computational studies of protein mass density that have attempted to account for the surface effects of water have mostly utilised solvent-corrected Voronoi tessellation methods Quillin and Matthews 2000 ; Andersson and Hovmöller 1998 ; Tsai et al. 1999 . While useful, the Voronoi method is known to produce inaccurate results for surface atoms which are sparsely surrounded by other atoms, leading to different density results depending on how or if the contributions of these surface atoms are accounted for Quillin and Matthews 2000 . The Voronoi method as applied to proteins is usually also adjusted to account for different atomic radii which can introduce vertex errors, though these can be eliminated by enveloping each Voronoi cell with a hyperbolic surface Goede and Preissner 1997 . While some previous work has used Voronoi methods including water molecules from a simulation, dividing the