Exploiting Symmetric Non-Convexity for Multi-Objective Symbol-Level DFRC Signal Design
Ly V. Nguyen, Rang Liu, Nhan Thanh Nguyen, Markku Juntti, Björn Ottersten, A. Lee Swindlehurst · 2025
Read Exploiting Symmetric Non-Convexity for Multi-Objective Symbol-Level DFRC Signal Design by Ly V. Nguyen, Rang Liu, Nhan Thanh Nguyen, Markku Juntti, Björn Ottersten, A. Lee Swindlehurst (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-14281.txt.
Introduction
Ly Nguyen and five co-authors design in 2025 signals that let one array both sense targets and send data. Such dual-use systems face a clash, since sensing and data aims pull in apart ways. Symbol-level shaping of each sent symbol offers a way to ease that clash.
A shared phase shift on all sent signals leaves sensing scores unchanged, a trait the team calls symmetric rotation invariance. Building on it, they craft a low-cost method that starts from radar-only signals. The method then bends those signals to meet data needs at low cost. It works for three sensing scores: beam shape match, signal quality, and a bound on sensing error. Tests back the gains claimed.
Catalog record
| CREATOR | Ly V. Nguyen, Rang Liu, Nhan Thanh Nguyen, Markku Juntti, Björn Ottersten, A. Lee Swindlehurst |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 74 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-14281
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Exploiting Symmetric Non-Convexity for Multi-Objective Symbol-Level DFRC Signal Design Ly V. Nguyen, Rang Liu, Nhan Thanh Nguyen, Markku Juntti, Björn Ottersten, A. Lee Swindlehurst Abstract Symbol-level precoding (SLP) is a promising solution for addressing the inherent interference problem in dual-functional radar-communication (DFRC) signal designs. This paper considers an SLP-DFRC signal design problem which optimizes the radar performance under communication performance constraints. We show that a common phase modulation applied to the transmit signals from an antenna array does not affect the performance of different radar sensing metrics, including beampattern similarity, signal-to-interference-plus-noise ratio (SINR), and Cramér-Rao lower bound (CRLB). We refer to this as symmetric-rotation invariance, upon which we develop low-complexity yet efficient DFRC signal design algorithms. More specifically, we propose a symmetric non-convexity (SNC)-based DFRC algorithm that relies on the non-convexity of the radar sensing metrics to identify a set of radar-only solutions. Based on these solutions, we further exploit the symmetry property of the radar sensing metrics to efficiently design the DFRC signal. We show that the proposed SNC-based algorithm is versatile in the sense that it can be applied to the DFRC signal optimization of all three sensing metrics mentioned above (beampattern, SINR, and CRLB). In addition, since the radar sensing metrics are independent of the communication channel and data symbols, the set of radar-only solutions can be constructed offline, thereby reducing the computational complexity. We also develop an accelerated SNC-based algorithm that further reduces the complexity. Finally, we numerically demonstrate the superiority of the proposed algorithms compared to existing methods in terms of sensing and communication performance as well as computational requirements. I Introduction The explosive growth of wireless services and the proliferation of smart devices have propelled the development of integrated sensing and communication (ISAC) technologies. As a key feature for sixth-generation (6G) wireless networks, ISAC offers an integration of environmental sensing and high-speed communication, achieving significant efficiency gains through shared resources [ 2 , 3 , 4 , 5 ] . Within the ISAC framework, dual-functional radar-communication (DFRC) systems play a pivotal role, supporting simultaneous radar sensing and communication on the same platform. This tight integration not only enhances spectral and energy efficiency but also reduces system complexity, hardware costs, and power consumption, making DFRC an attractive technology for future wireless systems. Potential applications of DFRC span autonomous driving, smart cities, environmental monitoring, and the Internet of Things (IoT), where both high communication quality and precise sensing are essential [ 6 ] . Attracted by its enormous potential, DFRC has been extensively studied in recent years. Dual-functional waveform design serves as a cornerstone for optimizing the performance tradeoff between radar sensing and communication functionalities [ 7 ] . Among the possible approaches, spatial-domain beamforming has garnered significant attention for enhancing DFRC performance, as outlined in [ 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 ] . These studies primarily focus on fulfilling communication requirements, such as ensuring a sufficient signal-to-interference-plus-noise ratio (SINR) [ 8 , 9 , 12 , 13 , 14 ] or maintaining a high data rate [ 10 , 15 , 16 ] , while simultaneously addressing the distinct objectives of the radar sensing tasks. These tasks typically fall into two categories: target detection, where maximizing radar SINR improves detection probability and reliability [ 16 ] , and target parameter estimation, where minimizing the Cramér-Rao lower bound (CRLB) enhances the accuracy of range, velocity, and angle estimation [ 13 , 14 , 16 ] . Beyond these task-specific objectives, generalized sensing performance metrics, such as beampattern design [ 8 , 9 , 12 ] or waveform similarity [ 10 , 15 ] , have also been proposed to address the challenges of sensing in complex environments. While these approaches have achieved notable success, from a communications perspective they attempt to minimize the impact of multi-user interference using so-called block-level processing (BLP), in which channel-coherent blocks of data undergo spatial signal processing [ 17 ] . However, the time-domain properties of the signals, which are crucial for managing clutter and dynamic targets [ 18 , 19 , 20 ] , are not exploited. Furthermore, DFRC systems inherently suffer from interference between radar and communication functionalities, which spatial beamforming alone cannot fully mitigate. Traditional spatial-domain beamforming methods for communication users typically treat radar signals as interference and attempt to suppress them. However, radar signals often have significantly higher power than communication signals, making complete suppression impractical and potentially degrading communication performance. To overcome the limitations of traditional spatial beamforming, symbol-level precoding (SLP) has emerged as a transformative approach [ 21 , 22 , 23 , 24 , 25 , 26 ] . Unlike conventional BLP, which relies on second-order statistics to suppress interference, SLP directly optimizes the transmit waveform on a symbol-by-symbol basis, leveraging instantaneous multi-user symbol information to reshape interference into a constructive component at each user’s receiver. This paradigm shift is particularly beneficial for DFRC, where radar-induced interference, rather than being suppressed, can be exploited to improve communication performance. Through joint optimization of radar sensing and communication functionalities, SLP-based DFRC designs harness both spatial and temporal degrees of freedom (DoFs), leading to superior system performance. Recent studies [ 27 , 28 , 29 , 30 , 31 , 32 , 33 ] have demonstrated that SLP-DFRC approaches significantly outperform traditional BLP-DFRC methods, achieving an improved balance between radar sensing accuracy and communication quality-of-service (QoS), making SLP a promising candidate for next-generation ISAC networks. Early works on SLP-based DFRC primarily focused on minimizing multi-user interference (MUI) while incorporating radar performance constraints, such as waveform similarity error [ 34 , 27 ] , transmit beampattern similarity error [ 35 ] , and the CRLB [ 36 ] . While these methods leverage the temporal DoFs provided by SLP to optimize the symbol-dependent waveforms, they do not fully harness the constructive interference (CI) capabilities of SLP, limiting their potential performance gains. Recognizing this deficiency, recent research has shifted towards CI-SLP-based DFRC designs, where interference from both radar and multiuser signals is no longer treated as a disruptive factor but is instead restructured to contribute constructively to symbol detection. Unlike traditional SLP methods that strictly enforce phase alignment with transmitted symbols, CI-SLP relaxes this constraint, introducing additional degrees of freedom in waveform design [ 25 ] . This increased flexibility allows for enhanced radar sensing capabilities without degrading communication quality. Various optimization objectives have been explored within this framework. Some studies have focused on optimization of beampattern similarity, ensuring that the transmitted waveform closely matches a given desired radar illumination pattern [ 28 , 29 , 37 , 38 ] . Others have sought to maximize radar SINR, improving target detection probability [ 39 , 30 ] , minimize the CRLB, enhancing parameter estimation accuracy [ 40 , 31 , 32 ] , or minimizing the radar sidelobe levels for better range-Doppler estimation performance [ 33 ] . Despite these advancements, the high computational complexity of existing SLP-DFRC optimization methods remains a fundamental challenge for practical deployment. The joint symbol-level optimization of radar and communication functionalities inherently leads to large-scale, non-convex, and highly nonlinear problems, posing significant difficulties for real-time implementation. Most existing approaches rely on iterative