Picosecond synchronization of mode-locked lasers for metropolitan-scale quantum networks Journal: opticajournal Publication type: Research Article
Cory Nunn, 1,* Nijil Lal, 1, Ivan Burenkov, 1,2 Ya-Shian Li-Baboud, 1 Paulina S. Kuo, 1 Thomas Gerrits, 1 and Sergey V. Polyakov 1,3 · 2025
Read Picosecond synchronization of mode-locked lasers for metropolitan-scale quantum networks Journal: opticajournal Publication type: Research Article by Cory Nunn, 1,* Nijil Lal, 1, Ivan Burenkov, 1,2 Ya-Shian Li-Baboud, 1 Paulina S. Kuo, 1 Thomas Gerrits, 1 and Sergey V. Polyakov 1,3 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-13773.txt.
Introduction
Cory Nunn and a team of co-authors synchronize two lasers to within picoseconds over city-scale fiber, in two thousand twenty-five. Quantum networks need light sources at distant sites to produce matching photons. That demands tight timing between the pump lasers at each site, far tighter than ordinary network clocks give.
The team locked two mode-locked lasers using a precise time protocol over one hundred twenty kilometers of working fiber. Pulse-to-pulse timing stayed better than three picoseconds. The spread of timing error stayed below four picoseconds over averaging times up to ten seconds. With the sources' planned coherence time, that timing implies near-perfect overlap when the photons meet.
Catalog record
| CREATOR | Cory Nunn, 1,* Nijil Lal, 1, Ivan Burenkov, 1,2 Ya-Shian Li-Baboud, 1 Paulina S. Kuo, 1 Thomas Gerrits, 1 and Sergey V. Polyakov 1,3 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 30 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-13773
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Picosecond synchronization of mode-locked lasers for metropolitan-scale quantum networks Journal: opticajournal Publication type: Research Article Cory Nunn, 1,* Nijil Lal, 1, Ivan Burenkov, 1,2 Ya-Shian Li-Baboud, 1 Paulina S. Kuo, 1 Thomas Gerrits, 1 and Sergey V. Polyakov 1,3 Abstract We demonstrate picosecond-level synchronization of two actively mode-locked Ti:Sapphire lasers via the White Rabbit Precision Time Protocol (WR-PTP), tested over 120 km of deployed optical fiber. This synchronization capability, in combination with the highly single-mode, transform-limited pulses produced by each laser, enables their use as pump lasers for indistinguishable photon sources at remote locations in a quantum network. Here, the WR-PTP serves as a scalable network synchronization protocol, and its performance is compared to traditional methods of local synchronization. We demonstrate pulse-to-pulse synchronization better than 3 ps and time deviation (TDEV) values below 4 ps for all averaging times up to 10 s. With a designed coherence time of 35 ps for single photon sources utilizing these lasers, the achievable temporal overlap corresponds to 98 % Hong-Ou-Mandel (HOM) interference visibility between independent sources. 1 Introduction Synchronization is fundamentally important for a range of quantum network applications, including quantum key distribution [ 1 ] , entanglement distribution [ 2 , 3 ] , and entanglement swapping [ 4 , 5 , 6 , 7 ] . In particular, protocols like swapping rely on the interference of single photons from independent sources within the network, and place stringent requirements on both the single-mode nature of the sources and the synchronization between them at distant nodes [ 8 , 9 , 10 , 5 ] . While the sources themselves must have high spectral purity to ensure indistinguishability across the network [ 11 , 12 ] , photon arrival times must also be synchronized to well within their coherence time, which depending on the physical implementation, may require accuracy to the level of picoseconds [ 13 ] . In previous work [ 14 ] , we developed a heralded source of single photons based on spontaneous parametric down-conversion (SPDC), which meets the aforementioned requirements for indistinguishability and can also be synchronized to a network clock. These key capabilities are enabled by the use of an actively mode-locked laser (MLL) as a pump, which provides nearly transform-limited pulses necessary to achieve the highest pair generation rate of highly indistinguishable, single-mode SPDC output photons [ 12 , 15 ] , and features active stabilization of cavity length to match an external reference clock. In this work, we characterize the timing stability of two such MLL systems synchronized over optical fiber in a realistic quantum network context. The clock synchronization method employed here is the White Rabbit Precision Time Protocol (WR-PTP), which has been standardized as the high-accuracy precision time protocol (HA-PTP) [ 16 , 17 ] . WR-PTP offer a range of open-source and commercial solutions for picosecond-level synchronization [ 18 , 19 ] , and has been deployed in various quantum network prototypes [ 20 , 21 , 13 , 22 ] . Sub-picosecond synchronization of MLLs has been previously demonstrated over several kilometers of optical fiber [ 23 , 24 ] , but the WR-PTP method explored here provides significant advantages for scalability. In particular, the coexistence of classical WR timing signals with quantum payloads allows for more robust compensation of path length fluctuations that naturally occur over deployed fiber due to environmental noise [ 25 , 22 , 26 ] . We measure the time deviation (TDEV) for the output pulses of two MLLs synchronized via WR-PTP, characterizing the short- and long-term stability over both 75 km of spooled fiber and 120 km of deployed fiber in a realistic network topology. In each scenario, synchronization within 4 ps is achieved, meeting the temporal indistinguishability requirements set by the SPDC source in Ref. [ 14 ] . 2 Experimental setup Figure 1 : (a) Schematic of the experimental setup, in three stages. The top layer depicts clock synchronization via the White Rabbit high-precision time transfer protocol. A standard rubidium (Rb) reference clock serves as the network grandmaster clock, and this provides a stable 10 MHz RF signal and 1 pulse-per-second (PPS) signal to a “leader” White Rabbit switch \mathrm{WR_{L}} . In turn, this switch synchronizes a “follower” switch \mathrm{WR_{F}} over optical fiber. For a deployed fiber loopback with higher transmission loss (see panel (b)), a “relay” node with switch \mathrm{WR_{R}} is synchronized directly to \mathrm{WR_{L}} and serves as an intermediary leader for \mathrm{WR_{F}} . On the next layer, the 10 MHz signal from each WR clock is converted into an 80 MHz sinusoid with signal generators SG_{1,2} . The 80 MHz signals drive the proprietary locking electronics \mathrm{LE}_{1,2} for each mode-locked laser \mathrm{MLL_{1,2}} . The \mathrm{LE} units can also be directly synchronized with local RF signals as an alternative to WR-PTP. The final layer shows the output pulse train of each laser detected by fast photodiodes \mathrm{PD_{1,2}} , and a time tagger records these detection signals alongside the original 10 MHz WR clock signals. Time differences between each pair of signals are analyzed in post-processing. WR logo is reproduced with permission, see [ 27 ] for copyright and licensing information. (b) Map of the deployed fiber loopback between NIST campus (with leader and follower systems L and F) and UMD, College Park (with relay node R). As a brief overview, this experiment evaluates the relative stability of the pulsed outputs of two MLLs synchronized to the same standard reference clock. While the lasers are co-located in the same laboratory for direct comparison, the clock signals are distributed over kilometers of optical fiber via the WR-PTP [ 18 ] . Particularly in the case of deployed fiber exposed to environmental noise, this effectively simulates the lasers’ performance at spatially separated nodes in a realistic network application [ 28 ] . A simplified schematic of the experimental setup is shown in Fig. 1 (a). From top to bottom, each layer depicts the distribution of a network clock via WR-PTP, followed by intermediate RF signal conversion to synchronize laser locking electronics to each WR switch, and finally the time-resolved measurement of the optical output pulses of each laser. These steps are described in greater detail below. A rubidium (Rb) atomic clock frequency standard serves as our network clock, shown in the top left corner of Fig. 1 . This provides a 10 MHz sinusoidal reference signal, connected as a direct input to a low-jitter WR switch, designated here as the “leader” \mathrm{WR_{L}} . The leader establishes two-way communication with a second low-jitter switch, “follower” \mathrm{WR_{F}} , over an optical fiber link. The switches interface via small form-factor pluggable (SFP) transceiver modules at wavelengths 1270 nm and 1290 nm, multiplexed over a single fiber with a pair of coarse wavelength division multiplexers (CWDMs), with transmit (Tx) and receive (Rx) ports as indicated in the figure. These wavelengths were chosen with coexistence of classical synchronization signals and quantum signals in mind, where relatively high-intensity classical signals are far detuned from the quantum channel (C-band) to minimize cross-talk [ 25 , 22 ] . This fiber connection was tested in two configurations. First, the primary link (dotted yellow line in Fig. 1 (a)) consists of interconnected fiber spools up