MIRI-JWST mid-infrared direct imaging of the debris disk of HD106906

Daniel Rouan, Anthony Boccaletti, Clément Perrot, Pierre Baudoz, Mathilde Mâlin, Pierre-Olivier Lagage, Rens Waters, Manuel Güdel, Thomas Henning, Bart Vandenbussche, Olivier Absil, David Barrado, Christophe Cossou, Leen Decin, Adrian M. Glauser, John Pye, Polychronis Patapis, Niall Whiteford, Eugen · 2025

Read MIRI-JWST mid-infrared direct imaging of the debris disk of HD106906 by Daniel Rouan, Anthony Boccaletti, Clément Perrot, Pierre Baudoz, Mathilde Mâlin, Pierre-Olivier Lagage, Rens Waters, Manuel Güdel, Thomas Henning, Bart Vandenbussche, Olivier Absil, David Barrado, Christophe Cossou, Leen Decin, Adrian M. Glauser, John Pye, Polychronis Patapis, Niall Whiteford, Eugen (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-13679.txt.

Introduction

Daniel Rouan and co-authors image the debris disk of a young star in mid infrared light with a space telescope in 2025, using team framing for a very long author list. Debris disks are rings of dust left from planet building. The goal was to map the disk's shape, heat, and dust mass. Grain sizes were also a target.

The disk shows clearly at both wavelengths used. Its shape fits a belt with a set edge radius. Fill inside that radius argues against carving by an inner giant planet. Grain size from the flux ratio matches what starlight blows out. Dust mass agrees with ground based radio data. Belt heat averages near seventy four kelvin.

Catalog record

CREATORDaniel Rouan, Anthony Boccaletti, Clément Perrot, Pierre Baudoz, Mathilde Mâlin, Pierre-Olivier Lagage, Rens Waters, Manuel Güdel, Thomas Henning, Bart Vandenbussche, Olivier Absil, David Barrado, Christophe Cossou, Leen Decin, Adrian M. Glauser, John Pye, Polychronis Patapis, Niall Whiteford, Eugen
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE61 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-13679

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

MIRI-JWST mid-infrared direct imaging of the debris disk of HD106906 Daniel Rouan, Anthony Boccaletti, Clément Perrot, Pierre Baudoz, Mathilde Mâlin, Pierre-Olivier Lagage, Rens Waters, Manuel Güdel, Thomas Henning, Bart Vandenbussche, Olivier Absil, David Barrado, Christophe Cossou, Leen Decin, Adrian M. Glauser, John Pye, Polychronis Patapis, Niall Whiteford, Eugene Serabyn, Elodie Choquet, Göran Ostlin, Tom P. Ray Gillian Wright Abstract Context. We report MIRI-JWST coronagraphic observations at 11.3 and 15.5 μ ​ m {\mu{m}} of the debris disk around the young star HD 106906. The wavelength range is sensitive to the thermal emission of the dust heated by the central star. Aims. The observations were made to characterize the structure of the disk through the thermal emission, to search for clues to the presence of a central void of dust particles, and to derive the mass of the dust and the temperature distribution. Another goal was also to constrain the size distribution of the grains. Methods. The data were reduced and calibrated using the JWST pipeline. The analysis was based on a forward-modeling of the images using a multiparameter radiative transfer model coupled to an optical code for coronagraphy processing. Results. The disk is clearly detected at both wavelengths. The slight asymmetry is geometrically consistent with the asymmetry observed in the near-IR, but it is inconsistent the brightness distribution. The observed structure is well reproduced with a model of a disk (or belt) with a critical radius 70 au, a mildly inward-increasing density (index 2) and a steeper decrease outward (index -6). This indication of a filled disk inside the critical radius is inconsistent with sculpting from an inner massive planet. The size distribution of the grains that cause the mid-IR emission is well constrained by the flux ratio at the two wavelengths : 0.45 – 10 μ ​ m {\mu{m}} and 0.65 – 10 μ ​ m {\mu{m}} for silicate and graphite grains, respectively. The minimum size is consistent with predictions of blowout through radiative pressure. Conclusions. We derive a mass of the dust that causes the mid-IR emission of 3.3 – 5.0 10 − 3 ​ M ⨁ 10^{-3}\,{M}_{\bigoplus} . When the larger grains (up to 1 cm) that cause the millimeter emission are included, we extrapolate this mass to 0.10 – 0.16 M ⨁ \,{M}_{\bigoplus} . We point out to that this is fully consistent with ALMA observations of the disk in terms of dust mass and of its millimeter flux. We estimate the average dust temperature in the planetesimal belt to be 74 K, but the temperature range within the whole disk is rather wide: from 40 to 130 K. Structure and mass of the disk 1 Introduction Debris disks are dusty disks that are most often found around young main-sequence and pre-main-sequence stars. They can help us to characterize one important phase in the initial evolution of exoplanetary systems. They are produced through collisional cascades, in which planetesimals break into millimeter to submicron-sized dust grains ( Wyatt 2008 ; Matthews et al. 2014 ; Hughes et al. 2018a ). Most of debris disks are detected through their far-IR excess, such as the archetypical excess around \beta Pic that was discovered by the IRAS satellite 1 1 1 Infrared Astronomical Satellite and then observed in the visible ( Aumann 1984 ; Smith & Terrile 1984 ). Since the advent of near-IR instruments with a high angular resolution that use adaptive optics and are installed on large telescopes, the direct detection of the light that is scattered by grains of the disk became another powerful way to study debris disks ( Hughes et al. 2018b ). The additional benefit of these instruments is that they provide structural information. Efficient scattering implies grains of a relatively small size. However, under the action of radiation pressure and/or stellar winds, dust grains that are smaller than a critical size must be blown out from the system on a timescale that is short enough to require that the collisional cascade continually produces small dust grains to replenish the disk ( Augereau & Beust 2006 ; Strubbe & Chiang 2006 ). This requires that the relative velocity of the planetesimals is sufficient to cause fragmentation upon impact. The question of the grain size distribution is then important and is directly related to the mechanisms of grain replenishment, blowout, and fragmentation that occur in the early phase of planet formation. Mid-IR resolved imaging is also an efficient means for studying the grain population in debris disks. By probing the thermal emission of the dust, it can constrain the size distribution of medium-size grains, their distribution in the disk, and their temperature, and it provides a more reliable estimate of the total grain mass. In the following, we present observations of the debris disk around the binary system HD 106906 that were obtained using the Mid-Infrared Imager (MIRI) aboard the James Webb Space Telescope (JWST) in its coronagraphic mode. The disk is indeed detected in the two filters F1140C (11.3 {\mu{m}} ) and F1550C (15.5 {\mu{m}} ), and we derived several pieces of information on its structure and its luminosity. Because of its small angular size, the disk is partly attenuated by the effect of the coronagraph. To proceed, we present an attempt to reproduce the observed fluxes and the spatial distribution of light using a radiative transfer model. The code takes scattering and thermal emission as well as a parameterized structure of the disk into account. From the comparison of the best-fit model to the observations, we derived several important quantities: the grain size distribution, the mass of the disk, the temperature map, and the structure. Sect. 2 summarizes what is known about the HD 106906 system. Sect. 3 describes details of the observations. Sect. 4 provides elements of the data reduction and calibration. In Sect. 5 we show the resulting images at the two observation wavelengths. Sect. 6 describes the components of the radiative transfer code we used. In Sect. 7 we analyze the output of the code for a grid of 96 different sets of parameters and compare them to observations to determine the best-fit model of the disk and the grain population. In Sect. 8 we discuss the results for the structure of the disk, the mass, and the temperature of the disk. We also discuss this in terms of consistency with other observations and theoretical works. 2 HD106906 HD 106906 (HIP 59960) is a pre-main-sequence F5V-type binary stellar system ( Absil et al. 2021 ; De Rosa & Kalas 2019 ; separation: 0.14 au , P.A.: 95.2 ∘ ) featuring a debris disk and an 11 \,{M}_{\rm Jup} planet companion ( Bailey et al., 2014 ) at an unusually large projected separation of \approx 800 au. Lagrange et al. (2016) estimated a physical distance between 2000 and 3000 au based on the assumption that the planet orbit is coplanar with the disk. The system is a member of the lower Centaurus Crux (LCC) association, which has a mean age of 17 \pm 5 Myr, which agrees with an isochronal age and mass of 13 \pm 2 Myr and 1.35 \,{M}_{\odot} for each component of the binary star ( Pecaut et al. 2012 ; Rodet et al. 2017 ). The debris

Read the complete text