Design Of A Dual-band Patch Antenna With Stacked Structure
by · 2025
Read Design Of A Dual-band Patch Antenna With Stacked Structure by by (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-13609.txt.
Introduction
Xunchi Ma designs, simulates, and builds a compact antenna that works in two frequency bands in this 2025 project paper. Patch antennas are flat and suit small wireless devices. The design stacks two copper patches with insulating layers between them, fed by a single line.
The target bands sit near 2.3 and 5.7 gigahertz, both used by common wireless systems. A five-millimeter offset between the patches strengthens the coupling between them. Simulations showed strong signal return and directional gain in both bands. Bench testing was limited by equipment, but the prototype met the design goals. Ma presents the antenna as a fit for compact and embedded wireless products.
Catalog record
| CREATOR | by |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 56 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-13609
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design Of A Dual-band Patch Antenna With Stacked Structure by Abstract \DeclareBibliographyCategory cited Abstract This report presents the design, simulation, and fabrication of a compact, dual-band patch antenna using a stacked structure, developed as part of an undergraduate engineering research project. Patch antennas are widely valued in modern wireless communication systems for their low profile, light weight, and ease of integration, but they traditionally suffer from limited bandwidth and single-frequency operation. In response to the increasing demand for antennas capable of operating at multiple frequency bands within a compact form factor, this project explores a dual-band design targeting the 2.25–2.35 GHz and 5.6–5.8 GHz frequency ranges—commonly used in industrial, scientific, and medical (ISM) applications. Two design approaches were considered: a slotted patch and a stacked configuration. After simulation-based analysis, the stacked structure was selected for its superior performance. The final design features two radiating copper layers separated by dielectric substrates, forming a multilayered structure where the top patch is responsible for higher-frequency resonance and the middle patch supports the lower band. A single feed line connects to the top layer, simplifying the design and minimizing the overall thickness of the antenna. To fine-tune performance, a 5 mm displacement between patch centers was introduced, which improved electromagnetic coupling and achieved the desired dual-band behavior. Simulation results demonstrated promising performance, with strong return loss (S11) values and directional gain in both frequency bands, indicating good impedance matching and radiation characteristics. However, due to time constraints and limited access to professional measurement equipment such as a vector network analyzer (VNA) or anechoic chamber, physical validation was limited. Despite these challenges, the final prototype achieved functionality aligning with design goals and highlights the potential of stacked patch antennas for applications in compact wireless devices, wearable technologies, and embedded systems. This project serves as a foundation for further development and optimization of dual-band antenna systems in practical wireless communication scenarios. Acknowledgements I would like to express my sincere gratitude to my final year project supervisor, Dr. Dimitris Anagnostou, whose expert guidance, unwavering support, and insightful feedback have been invaluable throughout this journey. His dedication and encouragement have greatly enriched my academic experience and inspired me to strive for excellence. I am also deeply thankful to Adán Simón for his technical assistance and to all the staff at the Electronic Workshop for fabricating my patch antenna. Their expertise and commitment played a crucial role in bringing this project to life. Without the support and contributions of these remarkable individuals, this project would not have been possible. Thank you all for your indispensable help and for being a significant part of this accomplishment. Statement of Authorship I, Xunchi Ma State that this work submitted for assessment is my own and expressed in my own words.Any uses made within it of works of other authors in any form (eg. Ideas, figures, text, tables) are properly acknowledged at their point of use. A list of the references employed is included. Date: 18/4/2025 Acronyms CST Computer Simulation Technology Studio Suite ISM industrial, scientific, and medical Chapter 1 Introduction 1.1 Background & Aim The rapid development of electronic devices has raised the demand for highly compact patch antennas resonating at different frequencies simultaneously. For example, the micro base station embedded in the common city infrastructure, the portable devices that can be easily placed in the human pocket. The aim of this project is to design a patch antenna which resonate in two different frequencies with low frequency at 2.25 GHz and high frequency at 5.7 GHz. To achieve the dual-band oscillation property, there are two approaches under consideration: (1) a slot applied on the primary mono-band patch antenna which creates the secondary oscillation frequency. (2) stack a second smaller patch antenna above the primary antenna. Two patch antennas work simultaneously, acquiring a dual band oscillation property. Both designs are supposed to operate with a single feed to reduce the thickness of the entire design. 1.2 Research Procedure 1.2.1 Slotted Design In the process of advancing the project, the slot method was gradually abandoned because its poor performance compared to the stacked design. For the slot version of design, in theory, a three segments rectangular slot is carved on the original patch antenna design, which resonates at 5.8 GHz, the slot itself will create the secondary 2.4 GHz resonance frequency. However, during the simulation process, it is observed that the patch antenna operates well in lower band. But the original resonation frequency is destroyed, which does not satisfy the dual-band property. The detailed performance will be discussed later. 1.2.2 Stacked Design After the slot method was abandoned. The focus of the research was shifted to the stacked design. At first, the overall approach was simple. The primary antenna dimension was modified to adapt to the increased thickness of the antenna. Then a secondary patch was sandwiched in the middle of the substrate and placed right below primary antenna. But the simulation result showed that the resonation pattern was not perfect. Since there is no electrical connection between to layers of patches the radiation energy is transferred purely magnetically. There are some coupling issues to be solved. To solve this problem, a methodology was introduced. It states that the vertical displacement of the align point between two patches can affect the coupling coefficient, and furthermore, affect the overall reflection coefficient of the patch antenna. So, a 5 mm displacement was introduced between two patches. And the simulation results proved that the feasibility of this methodology. The design was then exported to be fabricated by the workshop. The actual performance of the antenna in real life still needs further measurement. 1.3 Achieved Results After conducting the simulation for the patch antenna design. The overall performance of the antenna is summarised as follows. For the lower bands, the S11 parameter reached -20dB, the gain reached more than 8dBi For the upper bands, the S11 parameter reached -14dB, the gain reached more than 6dBi. And for both resonation frequency reached the radiation efficiency around -1.3 to -1.5dB. All the performance above showed that the prototype itself is very practical. Chapter 2 Background 2.1 Related Concepts 2.1.1 Microstrip A microstrip is a flat transmission line structure used in microwave and RF circuit design, particularly for applications where low cost, compactness, and ease of integration are crucial [ 59 ] . It consists of a thin metal conductor (the signal trace), which is placed on a dielectric substrate that has a ground plane underneath. The dielectric substrate serves as the medium through which the electromagnetic fields propagate. The ground plane, typically a continuous metal layer, lies parallel to the signal trace and is typically attached to the opposite side of the substrate or embedded within it, depending on the design. The microstrip structure is widely employed in printed circuit boards (PCBs) for RF and microwave signal transmission, as well as in various communication systems such as mobile phones, satellite communication, and radar systems. The microstrip transmission line is essentially a type of planar transmission line, where the signal trace runs on one side of a dielectric substrate, while the ground plane lies directly beneath it, separated by the thickness of the dielectric material. This construction allows for low-profile