Feedforward suppression of readout-induced faults in quantum error correction
Liran Shirizly, Dekel Meirom, Malcolm Carroll, Haggai Landa · 2025
Read Feedforward suppression of readout-induced faults in quantum error correction by Liran Shirizly, Dekel Meirom, Malcolm Carroll, Haggai Landa (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-13083.txt.
Introduction
Liran Shirizly, Dekel Meirom, Malcolm Carroll, and Haggai Landa propose, in a 2025 paper, a feedforward trick that cuts faults caused by reading out qubits. Measurement itself can corrupt a quantum device: states get misread, leakage creeps in, and later rounds inherit the mess. In error correction, rounds repeat fast, so readout faults compound.
Their protocol adapts each round's readout to the last round's result on the same check qubit. A simple version flips the qubit before measuring when the expected state calls for it. Simulations on a sparse parity-check code showed fewer logical errors and faster decoding at once. Because the fix rides on timing the hardware already has, it suits near-term machines. Fewer readout faults means lighter codes can guard the same data.
Catalog record
| CREATOR | Liran Shirizly, Dekel Meirom, Malcolm Carroll, Haggai Landa |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-13083
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Feedforward suppression of readout-induced faults in quantum error correction Liran Shirizly, Dekel Meirom, Malcolm Carroll, Haggai Landa Abstract Qubit measurements in quantum devices involve various types of errors, including erroneous state determination, correlated preparation errors and measurement-induced leakage from the computational states. We propose a feedforward protocol to reduce readout-induced faults, applicable for qubits with errors biased between the different states, in settings like quantum error correction with repeated measurement cycles. The method consists of an adaptive readout sequence conditioned on each check qubit’s readout result from the previous cycle, which is optimized for the expected measured state. Focusing on a simple realization of conditionally flipping (by an X gate) the state of check qubits before their measurement, we investigate the effect of such state-dependent errors using simulations in the setup of a low-density parity check code. We show that the suggested protocol can reduce both logical errors and decoding time, two important aspects of fault-tolerant quantum computations. Components of quantum error correction (QEC) and fault-tolerant computing are being realized with various platforms [ 3 , 69 , 74 , 67 , 49 , 62 , 2 , 32 , 7 , 1 , 63 , 64 ] . A dominant approach in the field is based on quantum circuits realizing stabilizer codes, wherein errors in data qubits (which store the quantum information) are repeatedly mapped to check qubits that are then measured to extract the error syndromes [ 76 ] . A measurement-based scheme [ 30 , 11 ] also forms the basis of efficient implementations of logical gates on state-of-the-art quantum low-density parity check (LDPC) codes [ 20 , 23 , 80 , 75 , 22 , 83 ] . Such codes therefore share a significant reliance on the performance of mid-circuit measurements of check qubits. Measurement results of check qubits constitute syndromes that are fed to a decoder whose task is to determine the changes in the state of the data qubits, and specify a possible correction procedure. Instead of applying an actual correction, the Pauli frame (including the logical one) can be tracked by the decoder [ 47 , 18 ] . Pauli frame tracking is often required since decoding is a computationally intensive task, while solid-state qubits, for example, operate at relatively fast clock times [ 46 , 14 ] . Approaches to reduce the real-time decoding computational burden are therefore an active area of research from both algorithmic and hardware perspectives [ 65 , 52 , 8 , 17 , 29 , 19 , 41 , 43 , 24 , 38 , 15 , 61 , 5 ] . Figure 1: A schematic depiction of the adaptive readout sequence, based on the outcome of each qubit’s previous measurement. (a) As an example focused on two check qubits of a stabilizer-based error correction code, following the measurement step shown on the left and in the absence of any further error, the first and second check qubits are again expected to be measured in the states \ket{1} and \ket{0} respectively (at the end of the syndrome cycle “SC”). The measurement type (indicated by color) applied to each qubit is conditioned and adapted to its expected state. (b) A possible realization of the adapted measurement is a conditional flip (an X gate) applied to each qubit that is expected to be in \ket{1} ; in this example, setting the first qubit back to \ket{0} while the second one is left untouched. A classical NOT on the first qubit’s measured bit would recover the expected syndrome at the end. In typical implementations, a check qubit’s value will tend to repeat itself at the end of each syndrome cycle until a fault leads to a flip. The fraction of check qubits measured in the excited state is expected to saturate at one half over many syndrome cycles when using Pauli frame tracking in a system with a computational basis formed by an effective ground state and excited state. For example, in Calderbank, Shor, Steane (CSS)-type codes, this is the case for X checks starting a cycle with all qubits in the ground state due to random collapse, and for the Z checks this follows from a random walk on the syndromes. With many qubit modalities, error rates are asymmetric between the computational |0\rangle and |1\rangle states during measurement and other gate operations. Importantly, leakage of the qubit state from the computational space (or qubit loss) is a significant issue, and readout-induced leakage may be stronger from one particular state, often the excited state [ 68 , 44 , 60 , 26 , 71 , 34 , 6 ] . Choices in the implementation of QEC could be customized to minimize exposure to the higher error rate states, significantly improving performance, and complementing various hardware approaches to enhance active and passive leakage reduction [ 4 , 56 , 57 , 50 , 45 , 77 , 54 , 16 , 82 , 27 , 28 , 12 , 73 ] . In the domain of readout-error mitigation efforts are centered on increasing accuracy given a large number of shots [ 59 , 81 , 72 , 39 , 33 , 35 , 48 , 78 ] , with Ref. [ 36 ] improving sampling results with X gates added before the readout of qubits that are likely to be in the state with a higher error at the termination of the circuit. Those approaches are not necessarily practical for QEC and single-shot improvements are required. Current works addressing such improvements use additional qubits, which complicates the required device connectivity [ 37 , 21 ] . Therefore, new methods for error suppression are needed. In this paper we propose an adaptive gate approach to reduce faults in the error-prone state during mid-circuit readouts that are repeated as part of a series of identical circuits, e.g., the syndrome cycles in a QEC setup. The protocol is designed to suppress the underlying physical cause of readout, preparation and leakage errors by using dynamic circuits with a feedfoward (conditional) operation, which naturally fits within a Pauli frame-tracking scenario. In addition to the reduction in logical error rates, we find that practical decoding algorithms execute faster as fewer detectors are unsatisfied. The adaptive readout method. The essence of the method, as schematically depicted in Fig. 1 (a), is in adapting the measurement gate of each check qubit to its expected state at the end of every QEC syndrome cycle. The adapted measurement gate sequence is selected based on the readout result from the previous cycle. More generally, the conditional logic could be extended to depend on a majority vote or some other processing of the last m readout results. The state-adapted measurement gate sequence can include, e.g., tuning the readout pulse parameters (amplitude, frequency, and other hardware specific parameters), or the discrimination boundaries and algorithm differentiating between the qubit states, allowing an overall optimization of the error rate. Such adaptations can be advantageous in particular for competing errors (e.g., when leakage is stronger from one qubit state while readout error is higher in the other state). Similarly, these adaptations could potentially be used to reduce some measurement-induced errors from one state at the cost of