Reconstruction and Performance Evaluation of FASER’s Emulsion Detector at the LHC

and Xingyu Zhao · 2025

Read Reconstruction and Performance Evaluation of FASER’s Emulsion Detector at the LHC by and Xingyu Zhao (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-13008.txt.

Introduction

The FASER Collaboration reports in 2025 how well its emulsion detector at the Large Hadron Collider can be read out and what it sees. The small forward detector hunts faint particles that stream along the beam line. Its emulsion films record tracks with hair fine detail but no time stamps, so rebuilding events takes care.

The paper describes the scanning and reconstruction chain and grades its performance on real runs. Track finding efficiency and position accuracy are the headline measures. The results back the detector's use in searches for dark photons and other light, weakly coupled particles. They also guide the larger successor detector now planned.

Catalog record

CREATORand Xingyu Zhao
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-13008

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reconstruction and Performance Evaluation of FASER’s Emulsion Detector at the LHC and Xingyu Zhao Abstract This paper presents the reconstruction and performance evaluation of the FASER ν \nu emulsion detector, which aims to measure interactions from neutrinos produced in the forward direction of proton–proton collisions at the CERN Large Hadron Collider. The detector, composed of tungsten plates interleaved with emulsion films, records charged particles with sub-micron precision. A key challenge arises from the extremely high track density environment, reaching 𝒪 ⁡ ( 10 5 ) \mathcal{O}(10^{5}) tracks per cm 2 . To address this, dedicated alignment techniques and track reconstruction algorithms have been developed, building on techniques from previous experiments and introducing further optimizations. The performance of the detector is studied by evaluating the single-film efficiency, position and angular resolution, and the impact parameter distribution of reconstructed vertices. The results demonstrate that an alignment precision of 0.3 µ 0.3\text{\,}\mathrm{\SIUnitSymbolMicro} and robust track and vertex reconstruction are achieved, enabling accurate neutrino measurements in the TeV energy range. 1 Introduction One of the primary physics goals of the ForwArd Search ExpeRiment (FASER) [ 1 , 2 , 3 , 4 ] at CERN’s Large Hadron Collider (LHC) [ 5 ] is to study neutrinos produced in the forward direction of the LHC proton-proton ( pp ) collisions, with energies in the TeV range [ 6 , 7 ] . In 2021, the FASER Collaboration reported the first evidence of neutrino interaction candidates produced at the LHC [ 8 ] . In 2023, the first observation of collider muon neutrinos was achieved using FASER’s electronic detector components [ 9 ] . Subsequently, the FASER Collaboration reported the first measurement of the muon neutrino interaction cross section and flux as a function of energy [ 10 ] . The interactions of all three neutrino flavours can be measured by identifying leptons generated through neutrino charged-current (CC) interactions with the FASER \nu emulsion detector [ 4 ] . For the first time, FASER measured \nu_{e} and \nu_{\mu} interaction cross sections using a 128\text{\,}\mathrm{k}\mathrm{g} subset of the FASER \nu detector after exposure to 9.5 fb -1 of 13.6 TeV pp collisions [ 11 ] . Charged particle tracks are reconstructed with sub-micron precision, enabling the measurement of the energy of the electrons and the momentum of the charged particles, including muons. The FASER \nu detector is placed 480 meters downstream from the ATLAS interaction point (IP1), aligned with the collision axis line of sight (LOS). Many of the charged particles from the LHC collisions are deflected by the LHC magnets, while neutral hadrons are absorbed by the approximately 100 meters of rock in front of the detector. However, given the 40 MHz collision rate at the LHC, many charged particles, such as muons, still reach the FASER \nu emulsion detector. It is therefore unavoidable to accumulate a large number of charged particle tracks, which poses a challenge for track and vertex reconstruction from neutrino interactions. The identification of track segments from fully automated emulsion film scanning systems was initially performed by means of the NETSCAN software [ 12 ] , originally developed for the DONuT experiment [ 13 ] and later adapted for the CHORUS experiment [ 14 ] . The FEDRA emulsion reconstruction framework [ 15 ] and NETSCAN 2.0 [ 16 ] were subsequently developed for the OPERA experiment. These tools incorporated film-to-film alignment, track reconstruction, topological decay search, momentum measurement, and electromagnetic shower reconstruction. A comprehensive historical overview of nuclear emulsion technologies and their development is presented in Ref. [ 17 ] . Recent experiments, such as NA65/DsTau [ 18 ] and FASER, present new challenges, requiring the reconstruction of data in a high track density environment ( \mathcal{O}(10^{5})-\mathcal{O}(10^{6}) tracks per cm 2 ), approximately three orders of magnitude higher than OPERA’s track density of 100–1000 tracks per cm 2 . Dedicated reconstruction algorithms to address these challenges were initially developed for DsTau [ 18 ] . The reconstruction of the FASER data builds on the FEDRA framework and DsTau algorithms, incorporating further optimizations to suit the specific conditions of FASER. Alignment techniques were also developed to fully exploit the high spatial resolution of the emulsion detector. This paper describes the reconstruction techniques developed for FASER \nu and the performance evaluation of the emulsion detector. Sec. 2 presents the detector, the temperature monitoring during exposure, and the automated scanning system. Sec. 3 describes the reconstruction process, which includes alignment techniques, track reconstruction, and vertex reconstruction. Sec. 4 discusses the performance evaluation of the emulsion detector based on the reconstructed tracks. 2 The Emulsion Detector Fig. 1 shows a schematic of the FASER \nu emulsion detector 1 1 1 The coordinate system associated to the FASER \nu emulsion detector has the z -axis pointing along the LOS away from IP1, the y -axis pointing vertically upward, and the x -axis pointing horizontally toward the LHC machine. The origin of this coordinate system is aligned with the center of the emulsion detector in the transverse ( x – y ) plane and is located at the front of the emulsion detector along the z -axis. . The emulsion detector has a transverse size of $25\text{\,}\mathrm{cm}$\times$30\text{\,}\mathrm{cm}$ and a length of approximately 100 cm. The total mass of the detector is approximately 1.1\text{\,}\mathrm{t} , corresponding to 220 radiation lengths along the beam. It consists of a repeated structure of 730 layers, each composed of a tungsten plate with a thickness of 1.1\text{\,}\mathrm{mm} and an emulsion film. The film is made by coating both sides of a transparent polystyrene base with a gel consisting of silver bromide crystals embedded in gelatin [ 17 ] . The film consists of two emulsion layers, each 65\text{\,}\mathrm{\SIUnitSymbolMicro m} thick, deposited on both sides of the 210\text{\,}\mathrm{\SIUnitSymbolMicro m} thick base. Figure 1 : A schematic illustration of the FASER \nu emulsion detector. The emulsion gel and the films were produced at the large-scale facility of Nagoya University [ 19 ] . In order to enhance sensitivity and reduce background, the films were exposed to high-humidity conditions, 95% R.H. (Relative Humidity), at 30\text{\,}\mathrm{\SIUnitSymbolCelsius} for 18 hours, and then dried for 3 hours at 50% R.H. at 25\text{\,}\mathrm{\SIUnitSymbolCelsius} before detector assembly [ 20 ] . The detector assembly was performed at the CERN darkroom facility, with controlled environmental conditions (R.H. of 50% and temperature of 20\text{\,}\mathrm{\SIUnitSymbolCelsius} ). The detector is organized in 73 modules, each consisting of 10 emulsion films and 10 tungsten plates, which were vacuum-packed with aluminum-laminated foils to isolate the detector from the external environment. Atmospheric pressure keeps the relative position of the different films within each module fixed during exposure. All 73 modules are installed in a mechanical structure, which presses all modules to one side for optimal alignment. Since the emulsion detector records all charged particles, it must be periodically replaced. In fact, according to the expected muon background flux at FASER and taking into account that the maximum acceptable track density is 10^{6} per \mathrm{c}\mathrm{m}^{2} , the detector is replaced two or three times a year. Details of the detector and of the operational procedures are reported in Ref. [ 4 ] . After installation, the emulsion detector is kept at a stable temperature of 16.5\text{\,}\mathrm{\SIUnitSymbolCelsius} using a

Read the complete text