Crossover in Electronic Specific Heat near Narrow-Sense Type-III Dirac Cones
Keita Kishigi, Yasumasa Hasegawa · 2025
Read Crossover in Electronic Specific Heat near Narrow-Sense Type-III Dirac Cones by Keita Kishigi, Yasumasa Hasegawa (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-12779.txt.
Introduction
Keita Kishigi and Yasumasa Hasegawa probe heat capacity near a flattened Dirac cone in a 2025 paper. Dirac cones come in three tilt kinds, and at the third kind the slope dies along one direction. In the narrow sense form, even the curved terms die, which leaves a fully flat run.
The pair tilt a model cone step by step and track electronic specific heat with warmth. A crossover shows near the narrow form: heat grows with the square of temperature below a mark, then with its square root above it. The density of states shape drives the switch. The mark gives labs a probe of tilt depth.
Catalog record
| CREATOR | Keita Kishigi, Yasumasa Hasegawa |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-12779
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Crossover in Electronic Specific Heat near Narrow-Sense Type-III Dirac Cones Keita Kishigi, Yasumasa Hasegawa Abstract Two-dimensional massless Dirac fermions exhibit Dirac cones, which are classified into three types: type-I, type-II, and type-III. In both type-I and type-II cones, the energy dispersion is linear in all momentum directions. Type-I cones are characterized by a non-overtilted structure, where the Dirac point serves as a local minimum (maximum) for the upper (lower) band. In contrast, type-II cones exhibit overtilted dispersions, leading to the coexistence of electron and hole pockets. At the critical tilt, the linear energy dispersion vanishes in one momentum direction, corresponding to a type-III Dirac cone. We further define a special case, termed the “narrow-sense” type-III cone, where not only the linear term but also quadratic and higher-order terms vanish, resulting in a completely flat dispersion along one direction. In this work, we numerically investigate the temperature ( T T ) -dependence of the electronic specific heat ( C C ), as the Dirac cone is continuously tilted from type-I to narrow-sense type-III. A model with particle-hole symmetry is employed to ensure that the chemical potential ( μ \mu ) remains temperature independent. Our results reveal a notable crossover in C C near narrow-sense type-III, where C C changes from C ∝ T 2 C\propto T^{2} below the crossover temperature ( T co T_{\rm co} ) to C ∝ T 1 2 C\propto T^{\frac{1}{2}} above T co T_{\rm co} . This crossover is attributed to the energy-dependent structure of the density of states. The present findings suggest a feasible approach for experimentally probing the degree of Dirac cone tilting near the narrow-sense type-III limit. I Introduction Two-dimensional (2D) massless Dirac fermion systems are realized in materials such as graphene [ 1 ] , \alpha -(BEDT-TTF) 2 I 3 [ 2 , 4 , 3 , 5 ] , and \alpha -(BETS) 2 I 3 [ 6 , 7 ] , among others, where Dirac points and Dirac cones are present. These systems exhibit a variety of intriguing properties, particularly when two Dirac points merge [ 8 , 9 , 10 , 11 , 12 ] . One notable phenomenon is a topological phase transition to a normal insulating state that occurs upon the merging of two Dirac points. This has been theoretically predicted in systems such as honeycomb lattices [ 13 , 14 ] , VO 2 /TiO 2 nanostructures [ 15 ] , and \alpha -(BEDT-TTF) 2 I 3 [ 16 ] . This merging point is termed the semi-Dirac point [ 15 ] . Experimental realizations of this transition and a semi-Dirac point have been reported in artificial systems including ultracold atoms in optical lattices [ 8 ] , photonic resonator lattices [ 9 ] , and polariton systems in semiconductor micropillar lattices [ 10 , 11 ] . More recently, evidence of a semi-Dirac point has been reported in real materials such as ZrSiS [ 12 ] . Near the merging of two Dirac points, a crossover behavior in the temperature ( T )-dependence of the electronic specific heat (C) has been identified through numerical calculations [ 17 ] . Specifically, C\propto T^{2} at low temperatures and C\propto T^{3/2} at higher temperatures, separated by a crossover temperature ( T_{\rm co} ). This crossover is caused by the enegry ( \varepsilon )-dependence of the density of states (DOS) [ D(\varepsilon) ], where D(\varepsilon)\propto|\varepsilon-\varepsilon_{\rm F}| near the Fermi energy ( \varepsilon_{\rm F} ) (as expected for 2D Dirac systems) and D(\varepsilon)\propto|\varepsilon-\varepsilon_{\rm F}|^{{1/2}} far from \varepsilon_{\rm F} (as expected for 2D semi-Dirac systems). As two Dirac points approach each other, T_{\rm co} shifts to lower values and eventually vanishes upon merging. This crossover thus serves as an important indicator of a topological phase transition in 2D Dirac systems [ 17 ] . The experimental observation of the electronic specific heat, C , has been achieved [ 5 ] only in bulk materials such as \alpha -(BEDT-TTF) 2 I 3 , where C\propto T^{1.8} has been measured and is close to expected C\propto T^{2} . However, the crossover in C associated with the topological phase transition has not yet been observed. It may be detectable under uniaxial strain. (a) (b) (c) Figure 1: (Color online) The energy bands of 2D type-I (a), narrow-sense type-III (b), and type-II (c) Dirac described by Eq. ( 1 ), where we take \varepsilon_{\rm F}=0 and {\tilde{\alpha}}=-0.5 for (a), {\tilde{\alpha}}=-1 for (b), and {\tilde{\alpha}}=-1.5 for (c). The Dirac point ( \mathbf{k}_{\rm D} ) is \mathbf{k}_{\rm D}=(0,0) and the Dirac cone is tilted to the k_{y} -axis. Figure 2: (Color online) The energy dispersions of type-I (solid lines), narrow-sense type-III (dotted lines), and type-II (dashed-dotted lines) shown in Figs. 1 (a), (b), and (c), respectively, are plotted from the viewpoint along the k_{x} -axis. The dimensionless height of the Dirac cone ( {\tilde{\varepsilon}_{\rm h}} ) is defined by the height from k_{y}=0 to \pi/a (or -\pi/a ) in the coordinate system used in this figure. We obtain {\tilde{\varepsilon}_{\rm h}}=\pi({\tilde{\alpha}}\pm 1) , where + and - signs correspond to {\tilde{\alpha}}<0 and {\tilde{\alpha}}>0 , respectively. For type-I with {\tilde{\alpha}}=-0.5 , {\tilde{\varepsilon}_{\rm h}}=0.5 . For {\tilde{\alpha}}=1 or -1 , the Dirac cone becomes narrow-sense type-III. The concept of a tilted Dirac cone has been extensively studied in 2D massless Dirac systems, particularly in \alpha -(BEDT-TTF) 2 I 3 , both theoretically [ 18 , 19 ] and experimentally [ 20 ] . Tilted cones are typically classified into type-I, -II, and -III. Type-I cones are tilted but not overtilted, type-II are overtilted, and type-III are critically tilted where the linear dispersion vanishes along one-direction. Type-III Dirac cones have been proposed in systems including Zn 2 In 2 [ 21 ] , laser-irradiated black phosphorus [ 22 ] , and Ni 3 In 2 X_{2} ( X = S, Se) [ 23 ] , based on first-principles calculations. Recently, type-III has drawn attention due to its analogy to black holes in condensed matter systems [ 24 , 25 , 26 ] . Theoretical studies have revealed that type-III systems exhibit unique transport properties distinct from those of types-I and -II [ 27 ] . Figure 3: (Color online) The energy dispersion of three-quarter Dirac described by Eq. ( 2 ) with {\tilde{\alpha}}=-1 , \varepsilon_{\rm F}=0 , \alpha^{\prime}_{2}=\hbar v_{\rm F}/2 , and \alpha^{\prime\prime}_{2}=\hbar v_{\rm F}/4 is viewed along the k_{x} -axis. In this study, we focus on the electronic specific heat in the vicinity of “narrow-sense type-III” Dirac cones, where the linear and higher-order terms vanishes. We adopt a minimal model given by \varepsilon=\varepsilon_{\rm F}+\alpha k_{y}\pm\hbar v_{\rm F}\sqrt{k_{x}^{2}+k_{y}^{2}}, (1) where h is Planck’s constant, \hbar=h/(2\pi) , v_{\rm F} is the Fermi velocity, and the parameter, \alpha , characterizes the tilting of the Dirac cone along the k_{y} direction. In this study, the wave vector space is restricted to the range, -\pi/a<k_{x}\leq\pi/a and -\pi/a<k_{y}\leq\pi/a . We define a dimensionless tilting parameter as \tilde{\alpha}=\alpha/(\hbar v_{\rm F}) , and the system is classified as type-I for |\tilde{\alpha}|<1 , narrow-sense type-III for |\tilde{\alpha}|=1 , and type-II for |\tilde{\alpha}|>1 . Figures 1 and 2 show the energy dispersion for representative values of \tilde{\alpha} in each regime. In the main text, we use the dimensionless energy, {\tilde{\varepsilon}}=a\varepsilon/(\hbar v_{\rm F})