Tuning Methods for Multigap Drift Tube Linacs
O. Shelbaya, R. Baartman, P. Braun, P. M. Jung, O. Kester, T. Planche, H. Podlech, S. D. Rädel · 2025
Read Tuning Methods for Multigap Drift Tube Linacs by O. Shelbaya, R. Baartman, P. Braun, P. M. Jung, O. Kester, T. Planche, H. Podlech, S. D. Rädel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-12502.txt.
Introduction
Olivier Shelbaya and co-authors present tuning methods in 2025 for a workhorse part of particle accelerators. Long tubes with many gaps push charged beams up to a few percent of light speed and drive nuclear physics labs worldwide. Unlike single-gap parts, these tubes have no neat formula linking settings to the beam that comes out.
The team tracks the beam's spread through the tube's fields using its first two spread measures. A beam-based calibration ties the model to the machine's real radio settings. The method then quickly returns the settings needed for a wanted beam energy and spread. Tests with a sodium ion beam confirmed the method works, giving operators a fast online energy change tool.
Catalog record
| CREATOR | O. Shelbaya, R. Baartman, P. Braun, P. M. Jung, O. Kester, T. Planche, H. Podlech, S. D. Rädel |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-12502
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Tuning Methods for Multigap Drift Tube Linacs O. Shelbaya, R. Baartman, P. Braun, P. M. Jung, O. Kester, T. Planche, H. Podlech, S. D. Rädel Abstract Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike single-gap structures, there is no closed-form expression to calculate the output beam parameters from the cavity voltage and phase. To overcome this, we propose to use a method based on the integration of the first and second moments of the beam distribution through the axially symmetric time-dependent fields of the cavity. A beam-based calibration between the model’s electric field scaling and the machine’s rf amplitudes is presented, yielding a fast on-line energy change method, returning cavity amplitude and phase necessary for a desired output beam energy and energy spread. The method is validated with 23 Na 6+ beam energy measurements. Preprint: RSI23-AR-02313 I Variable Energy Linear Accelerators Particle accelerator research facilities around the world, such as REX-ISOLDE [ 1 ] , GSI [ 2 ] and TRIUMF [ 3 ] have been pursuing investigations into the properties of nuclei across the nuclear chart, using multigap rf cavities to achieve requisite beam energies. Using interdigital H-Type structure (IH) cavities [ 4 , 5 ] , such as shown in the cross-section drawing in Fig. 1 , these can be operated at variable output [ 6 ] beam velocity making them an ubiquitous choice in ion linacs. The relatively small drift tubes enable a high shunt impedance for a variety of rf phase and amplitude combinations [ 7 ] . Figure 1: Cross-sectional drawing of the third IH accelerating cavity in TRIUMF ISAC-DTL, operating at with f = 106 MHz, consisting of 15 gaps about an axis of radial symmetry (red, dotted line). Each drift tube is held in place by a stem (digit). For scale, \beta\lambda/2=4.5 cm Separated function [ 6 ] machines enable shorter rf cavities when compared the Alvarez type linac, enabling larger energy gain in a shorter physical length. Flexibility in the IH structure’s cell length permits design of low energy reference particle acceleration where the relative change in \beta = v/c can be appreciable within even a single tank [ 8 ] . With such structures, as we are about to see, the relationship between the output energy and the cavity amplitude and phase can no longer be described by a simple cosine function with a constant ‘transit time factor’ (TTF) [ 9 ] . To calculate the cavity amplitude and phase required to produce a desired output velocity and energy spread, we propose a method that combines the accuracy of a multiparticle simulation with the speed of an envelope code [ 10 ] : Since a single reference particle is tracked through the fields, together with the second moments of the distribution centered around it, this results in a more computationally lightweight and therefore faster runtime, when compared to ray-tracing [ 11 ] . After exposing the method, we present its application to the case of TRIUMF’s ISAC-DTL [ 12 ] (Figure 2 ), a separated function drift tube linac [ 6 ] based upon the combined zero degree structure (KONUS) [ 7 , 13 ] . Figure 2: Schematic representation of the ISAC-DTL, consisting of five IH accelerating tanks and three longitudinal bunching cavities. Quadrupole triplets provide transverse focusing. A beam-based calibration, obtained by performing scans of the output energies vs. rf phase, is presented. With this, it is possible to use constrained optimization to compute DTL rf settings on-line, and rapidly change the output energy of the structure. The simulation’s predicted reference particle energy is compared to on-line measurements of an 23 Na 6+ beam to validate the approach. This can be applied to any DTL, given knowledge of its on-axis electric field, obtained either by bead-pulling measurements or simulations. II Method II.1 Panofsky Equation-Based Methodology The energy gained by a charged particle passing through a single rf gap can in general be written as [ 9 , 14 ] : \Delta E=qV_{0}T\cos\theta, (1) where q is the particle charge, \theta is its phase with respect to the gap midpoint, V_{0} is the integral of the on-axis longitudinal electric field known as the effective voltage or amplitude voltage, and T\in[0,1] is the ‘transit-time factor’ for a single gap of length L , with rf wavelength \lambda and reference particle velocity \beta c [ 14 ] : T=\frac{\sin(\pi L/(\beta\lambda))}{\pi L/(\beta\lambda)}. (2) The value of T depends on the particle velocity and gap geometry, and is independent of \theta in the particular case where all of the following conditions are met: (i) the origin of time t = 0 is chosen at the center of the gap, (ii) the cavity on-axis field profile \mathcal{E}(s) is an even function, and (iii) the velocity change of the particle across the gap is negligible [ 14 ] . The elegant simplicity of this approach is lost when a particle traverses a multigap structure and sees its velocity change significantly. Though multigap structures can be modelled as a sequence of individual gaps, each with its own T , its own \theta and its own V_{0} , this computation is more involved: The particle velocity and time of arrival at each gap is not known a priori , and must be calculated numerically. Consequently, the value of both the transit time factor and phase parameter for every gap is a function of the cavity amplitude and phase setting. The resulting cavity output energy versus rf amplitude and phase can be measured and compared to machine simulations [ 15 , 16 ] or represented as a Fourier series whose amplitude coefficients are fit using on-line measurements [ 17 ] . Since numerical integration is required in any case, it is advisable to abandon eq. 1 , and instead evaluate the longitudinal equations of motion through the actual on-axis field of the cavity. II.2 Proposed Method As outlined in previous work [ 18 , 16 ] , we choose to use the Frenet-Serret coordinate s , which tracks the arclength of the reference particle’s trajectory, as independent variable. Then, the state vector of any particle in the beam can be written as: {\bf X}=(x,P_{x},y,P_{y},z,\delta P) (3) where the longitudinal canonical coordinates, ordinarily time and energy deviations, have been scaled by the synchronous particle velocity \beta_{0}c so that they are homogenous to a length and a momentum, while preserving their canonical nature. z=\delta t\beta_{0}c=\text{, \ and \ }z^{\prime}\equiv\delta P=\frac{\delta E}{\beta_{0}c}. (4) In transoptr , the bunch length z is fundamentally a time-spread scaled by the reference particle velocity so that it is recorded in units of length for consistency with the transverse bunch dimensions ( x,y ). All three ( x,y,z ) are differentials with respect to the reference particle. The longitudinal coordinates are differentials with respect to the reference particles coordinates t_{0} and E_{0} . These are found by integrating the two equations derived from the Hamiltonian H_{s} \frac{{\rm d}E_{0}}{{\rm d}s}=\frac{\partial H_{s}}{\partial t}\mbox{, \ and \ }\frac{{\rm d}t_{0}}{{\rm d}s}=-\frac{\partial H_{s}}{\partial E}=\frac{E_{0}}{P_{0}}=\frac{1}{\beta_{0}c}. (5) In the idealized case with centred beam and correctly chosen Frenet-Serret reference trajectory, forces are linear