The interplay between Jahn-Teller distortions and structural degrees of freedom on pseudocubic states in manganite perovskites
Ben R. M. Tragheim, Elodie A. Harbourne, Clemens Ritter, Andrew L. Goodwin, Mark S. Senn · 2025
Read The interplay between Jahn-Teller distortions and structural degrees of freedom on pseudocubic states in manganite perovskites by Ben R. M. Tragheim, Elodie A. Harbourne, Clemens Ritter, Andrew L. Goodwin, Mark S. Senn (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-11153.txt.
Introduction
Ben Tragheim and four co-authors traced a phase shift in manganite perovskites to a three way coupling. Their paper, from twenty twenty-five, deals with a mixed crystal of lanthanum, manganese, and gallium oxides. They read its mean structure with synchrotron X-ray and neutron powder tools, from a symmetry first view. In a mid mix range the crystal flips from a bent form to a near cubic one.
A three part term joins shear strain, octahedral spin, and an orbital order mode. That term drives the flip. Monte Carlo runs show how the shear link grows from small scale acts. Readers in materials get a lever: strain can steer orbital order in such crystals.
Catalog record
| CREATOR | Ben R. M. Tragheim, Elodie A. Harbourne, Clemens Ritter, Andrew L. Goodwin, Mark S. Senn |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-11153
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
The interplay between Jahn-Teller distortions and structural degrees of freedom on pseudocubic states in manganite perovskites Ben R. M. Tragheim, Elodie A. Harbourne, Clemens Ritter, Andrew L. Goodwin, Mark S. Senn Abstract The average structure of the solid solution LaMn 1-x Ga x O 3 (LMGO) has been investigated from a symmetry-motivated approach utilizing synchrotron x-ray and neutron powder diffraction techniques. We show experimentally that a trilinear coupling term ( Γ 5 + \Gamma_{5}^{+} M + 2 {}_{2}^{+} M + 3 {}_{3}^{+} ) between shear strain, octahedral rotation, and the C C -type orbital ordering mode is responsible for driving the orthorhombic to pseudocubic phase transition occurring in the composition range 0.5 < < x x < < 0.6. Our Monte Carlo simulations elucidate the macroscopic origin of this coupling to shear strain, and point to its importance with respect to controlling the orbital order-disorder transitions. We find that the emergence of the pseudocubic state can be rationalized by considering the competition between this trilinear term and a linear-quadratic term of the out-of-phase octahedral tilting with strain ( Γ 5 + \Gamma_{5}^{+} (R − 5 {}_{5}^{-} ) 2 ). Illustrating the general nature of these results, we construct a simple function that captures the change in Landau free energy at the order-disorder transition, in parameters that are trivial to relate to the concentration of Jahn–Teller active species, temperature, tolerance factor and unit cell strain, for a broad range of manganite perovskites. Our results point to the fact that far from the pseudocubic state being a symptom of orbital disorder, it is in many cases more correctly to view it as a cause. The results have a broad impact on the study of orbital ordering physics in the perovskite materials and on chemical and physical control parameters through which to tune the richness of the intertwined physical properties. Preprint: APS/123-QED I Introduction The interplay between structural, electronic and magnetic degrees of freedom in cubic perovskites (of the form AB O 3 ) is crucial in understanding the emergence of various technologically relevant properties. One canonical example is that of colossal magnetoresistance (CMR), the property of a material to undergo large decreases of resistivity under the application of an external magnetic field. CMR emergence in the hole-doped perovskite manganites La 1-x Ca x MnO 3 (LCMO) has been intensely studied over the past several decades, primarily due to its potential applications in novel data storage devices and sensor technologies. [ 1 ] Maximal decreases in the resistivity of LCMO (occurring at a composition x = 3/8), [ 2 ] are believed to be caused by percolative phase segregation between different insulating and metallic charge and orbital (dis)ordered states. [ 3 ] Hence, in order to optimize the CMR effect, and to appreciate how the different charge and orbital ordering phenomena control this property in these materials, it is imperative to obtain an accurate microscopic understanding of these states, allowing one to successfully tune the properties in a targeted way. However, the phase diagram of LCMO is ubiquitously complex, [ 4 , 5 ] and many different control parameters are affected simultaneously upon Ca 2+ doping that result in these different states. These effects include mixed Mn oxidation states, electronic band-narrowing phenomena, and different degrees of Jahn–Teller (JT) distortions and tolerance factor changes. All of these control parameters play a role in charge and orbital ordering. However, they also have a strong influence on the observed strain, domain structure and superstructure, and so it means that these competing complexities prevent an accurate microscopic understanding to determine to what extent each of these contribute to ordering phenomena, and hence the emergence and optimization of CMR. The use of prototype systems allows one to overcome this competing complexity issue. In these systems, only one of the control parameters is allowed to vary systematically, while all of the others are in principle isolated as much as possible in an attempt to decouple these parameters from each other. This approach presents the opportunity to target how each type of complexity contributes independently to the emergence of charge and orbital ordering phenomena in manganite perovskites. For example, we have previously shown using cubic manganite quadruple perovskites A Mn 3 Mn 4 O 12 ( A = Ca 1-x Na x , Hg 1-x Na x ), which decouple the Pbnm structural degrees of freedom from the process of chemical doping, that for compositions of x giving an average Mn B site oxidation state coincident with compositions of LCMO of maximal CMR effects, a novel 1:3 orbital order:charge disorder striping occurs [ 6 , 7 ] . And, via the careful analysis of symmetry-breaking strain in the prototype systems R {}_{\frac{5}{8}} Ca {}_{\frac{3}{8}} MnO 3 ( R = rare-earth cation) at this doping level, we have shown that the maximum in CMR coincides with the point of closest proximity to this novel orbital order:charge disorder state [ 8 ] . Hence, the use of prototype systems allows one to uncover crucial information regarding ordering phenomena which would otherwise not have been observed by considering the original LCMO solid solution. The solid solution LaMn 1-x Ga x O 3 (LMGO) proves to be another ideal prototype system for investigating the influence of the JT effect on orbital ordering phenomena in manganite perovskites, and specifically its interplay with strain that strongly affects any phase coexistence behavior. The solid solution end member LaMnO 3 is a canonical example of a material that exhibits long-range C -type orbital order. [ 9 ] In this case, the orbital order is caused by the cooperative JT effect, described as alternating directions of d_{z^{2}} orbitals within the orthorhombic Pbnm a - b plane and layered along the c axis. Substitution of the JT-active high-spin Mn 3+ cation for JT-inactive Ga 3+ results in a reduction of the cooperative JT effect, which acts to reduce the magnitude or change the type of orbital order behavior. Using Ga 3+ as the chosen substituent for high-spin Mn 3+ is important because they both contain similar ionic radii in an octahedral environment: 0.645 Å and 0.62 Å, respectively. [ 10 ] This means additional octahedral rotations are minimized, isolating out tolerance factor effects as much as possible, while still retaining the orthorhombic Pbnm structure of the insulating CMR-active LCMO phases. The LMGO solid solution has previously been made and studied by both x-ray and neutron diffraction techniques to corroborate changes in orbital ordering behavior. [ 11 , 12 ] Lattice parameters of the Pbnm orthorhombic unit cell converge from b > a > c / \sqrt{2} to a pseudocubic state where b \approx a \approx c / \sqrt{2} at a range of Ga 3+ substitution 0.5 < x < 0.6. This transition is observed in both the high-temperature phase transition of LaMnO 3 , [ 13 ] and across the LCMO phase diagram at room temperatures. [ 14 ] Typically this transition is considered a fingerprint of orbital order-disorder behavior in manganite perovskites, especially when coupled with local structure probes that provide conclusive evidence of disorder. [ 15 , 16 , 17 ] Hence, it is considered here that LMGO undergoes the same orbital order-disorder transition as observed in other