Planar Hall effect in ultrathin topological insulator films

Mohammad Shafiei, Milorad V. Milošević · 2025

Read Planar Hall effect in ultrathin topological insulator films by Mohammad Shafiei, Milorad V. Milošević (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-10980.txt.

Introduction

Mohammad Shafiei and Milorad Milošević explain how a planar Hall effect switches on in ultrathin topological insulator films in a 2025 paper. The effect, a sideways voltage under an in-plane magnetic field, was linked to exotic semimetals. In flat topological insulators it should vanish, since their Berry curvature points the wrong way to steer carriers.

Real films are quasi-two-dimensional, and tunneling between the two surfaces changes everything. Paired with in-plane magnetization, that coupling bends electronic behavior enough to allow a finite effect. Strong in-plane fields can even stabilize a quantum anomalous Hall state usually tied to out-of-plane magnetization. Magnetic topological devices gain design room.

Catalog record

CREATORMohammad Shafiei, Milorad V. Milošević
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-10980

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Planar Hall effect in ultrathin topological insulator films Mohammad Shafiei, Milorad V. Milošević Abstract The planar Hall effect (PHE), previously observed in Weyl and Dirac semimetals due to the chiral anomaly, emerges with a different origin in topological insulators (TIs), where in-plane magnetic fields induce resistivity anisotropy. In strictly two-dimensional TIs, PHE is generally suppressed due to the inability of the out-of-plane Berry curvature to couple to the in-plane band velocity of the charge carriers. Here, we demonstrate that in ultrathin TI films, a quasi-two-dimensional system, intersurface tunneling coupling with in-plane magnetization induces electronic anisotropy, enabling a finite PHE. In addition, we reveal that strong in-plane magnetization can stabilize the thickness-dependent quantum anomalous Hall effect, typically associated with out-of-plane magnetization. These insights advance the understanding of magnetic topological phases, paving the way for next-generation spintronic devices and magnetic sensing technologies. Introduction The planar Hall effect (PHE) is a magnetoresistive phenomenon where an in-plane transverse voltage emerges in response to coplanar electric and magnetic fields Ghorai et al. 2025 ; Zhong et al. 2023 ; Ma et al. 2024 . PHE has garnered significant interest for its potential in high-sensitivity magnetic sensors Bhardwaj et al. 2021 , magnetic random access memory devices Binh et al. 2019 ; Bason et al. 2006 , and lab-on-a-chip platforms for detecting low magnetic moments Elzwawy et al. 2021 . PHE has been realized across various material platforms Chang et al. 2023 ; Zhong et al. 2023 including topological metals Burkov 2017 and ferromagnetic semiconductors Zhong et al. 2023 , with more recent observations in Dirac and Weyl semimetals Kumar et al. 2018 , where the chiral anomaly plays a pivotal role. In topological insulators (TIs), PHE emerges through Dirac cone tilting and system-induced anisotropy Taskin et al. 2017 ; Zheng et al. 2020 . In three-dimensional TIs, PHE can serve as a sensitive probe of Berry curvature and topological properties Ghorai et al. 2025 . However, in strictly two-dimensional systems, conventional Berry curvature-driven PHE is prohibited due to the inability of out-of-plane Berry curvature to couple to electron velocities confined to the plane Ghorai et al. 2025 . Recent studies have sought to overcome the latter constraint. Specifically, Ghorai et al. Ghorai et al. 2025 demonstrated PHE in bilayer graphene, a quasi-two-dimensional system, attributing the effect to interlayer tunneling driven by finite interlayer hopping. Inspired by this study, here we investigate the emergence of PHE in ultrathin TI films as a quasi-two-dimensional platform. In this regime, strong intersurface coupling induces a hybridization gap, consistent with experimental observations Zhang et al. 2010 . This hybridization reshapes the electronic structure, giving rise to interesting phenomena absent in thicker samples Shafiei et al. 2022 ; Shafiei et al. 2024 . Similarly to bilayer graphene, we attribute the emergence of PHE to intersurface tunneling between hybridized TI layers. As intersurface coupling strength can be tuned by varying the film thickness or applying strain Shafiei et al. 2022 , ultrathin TI films present an ideal platform for controlled PHE generation. Furthermore, while Hall responses are typically suppressed in systems lacking strong spin-orbit coupling Cullen et al. 2021 ; Liang et al. 2018 ; Ghorai et al. 2025 , ultrathin TIs exhibit robust spin-orbit interactions, making them a promising candidate for magnetic sensors and advanced two-dimensional devices. We here demonstrate that intersurface hybridization, coupled with in-plane magnetization, induces electronic anisotropy, enabling a detectable PHE. Our analysis reveals that this coupling arises from second-order momentum contributions within the hybridization gap, emphasizing the nontrivial role of in-plane magnetization. By examining the dependence of PHE on magnetization strength, orientation, and film thickness, we chart out the interplay of magnetic and electronic structure in ultrathin TI films, useful beyond this work alone. Additionally, we show that with further increasing in-plane magnetization in this system, a quantum anomalous Hall effect (QAHE) is found, extending its realm beyond the conventional case of out-of-plane magnetization. QAHE characterized by quantized Hall conductance without an external magnetic field Chang et al. 2013 , enables dissipationless edge current transport — a key ingredient for low-power electronics, quantum metrology, and topological quantum computation Tokura et al. 2019 ; Chang et al. 2023 . QAHE was first observed in magnetically doped TIs Chang et al. 2013 and later achieved in TI/ferromagnet heterostructures Xu et al. 2015 . Our results delve deeper into the understanding of magnetic topological insulators in the ultrathin limit, and add to their potential for next-generation spintronics, quantum computing technologies, and Hall sensors, where precise control of electronic and topological properties is paramount. System and Hamiltonian As a generic example, we consider an ultrathin Bi 2 Se 3 film doped with magnetic atoms or subjected to an external magnetic field. This family of materials is well established for their topological properties and rhombohedral crystal structure Zhang et al. 2009 , with a unit cell comprising two Bi atoms and three Se atoms known as a quintuple layer (QL) Zhang et al. 2009 ; Zhang et al. 2010 . The effective low-energy Hamiltonian for the surface states of this system can be described as Zhang et al. 2010 ; Liu et al. 2010a ; Zheng et al. 2020 : H_{TI}=\sum_{k^{\prime}\sigma\sigma^{\prime}}c^{\dagger}_{k^{\prime}\sigma}h_{TI}(k^{\prime})_{\sigma\sigma^{\prime}}c_{k^{\prime}\sigma^{\prime}}, (1) where h_{TI}(k^{\prime})=(\Delta_{0}-\Delta_{1}k^{\prime 2})\sigma_{z}+v_{F}(k^{\prime}\times\sigma)_{z}-\mathbf{\sigma}\cdot\mathbf{M}. (2) Here, c^{\dagger}_{k^{\prime}\sigma} ( c_{k^{\prime}\sigma^{\prime}} ) are the creation (annihilation) operators of electrons, v_{F} is the Fermi velocity, \mathbf{\sigma} are Pauli matrices for spin, k^{\prime}=(k^{\prime}_{x},k^{\prime}_{y}) is the in-plane momentum, and \mathbf{M} is the in-plane magnetization vector, induced by magnetic adatoms or an external in-plane magnetic field. For magnetically doped TIs, magnetic impurities distributed over the lattice sites produce a net in-plane magnetization M , with higher concentrations leading to increased magnetization. For an applied in-plane magnetic field, the resulting magnetization arises from the Zeeman exchange interaction induced by the field. Thus, the effect of magnetic impurities or the magnetic field is included as the Zeeman exchange term in the Hamiltonian (Eq. ( 2 )). The parameters \Delta_{0} , \Delta_{1} , and v_{F} depend strongly on film thickness. We compiled experimental data for these parameters at various thicknesses Zhang et al. 2010 , summarized in Table 1 . Both \Delta_{0} and \Delta_{1} decrease with increasing thickness and vanish beyond the 5QL thickness, marking the transition from the ultrathin to bulk regime Zhang et al. 2010 ; Liu et al. 2010b . 2QL 3QL 4QL 5QL 6QL \Delta_{0} (eV) 0.126 0.069 0.035 0.020 0 \Delta_{1} (eV \textup{\AA}^{2}) 21.8 18 10 5 0 v_{F} (eV Å ) 3.10 3.17 2.95 2.99 2.98 Table 1: Thickness-dependent parameters \Delta_{0} , \Delta_{1} , and v_{F} for ultrathin TI films (2-6QL). Values derived from experimental data Zhang et al. 2010 . In-plane magnetization \mathbf{M} is given by \mathbf{M}=(M_{x},M_{y})=(M\cos\theta,M\sin\theta) , where \theta is the angle between magnetization and the x -axis. For samples thicker than 5QL, the parameter \Delta_{1} vanishes, and the presence of \mathbf{M} only induces a shift in the Dirac cone. However, for samples with thicknesses of 5QL or less, the second-order momentum term from the hybridization gap shifts the Dirac cone’s origin (0,0)\to(M_{y}/v_{F},-M_{x}/v_{F}) and introduces anisotropy in its dispersion. This effect is evident when the Hamiltonian is expanded around the shifted Dirac point at (M_{y}/v_{F},-M_{x}/v_{F}) , as follows: \displaystyle H_{\text{TI}}(\mathbf{k}) \displaystyle=\left(\Delta_{0}-\Delta_{1}k^{2}-\frac{\Delta_{1}M^{2}}{v_{F}^{2}}\right)\sigma_{z}+v_{F}(\mathbf{k}\times\bm{\sigma})_{z} (3) \displaystyle-\frac{2M\Delta_{1}}{v_{F}}(k_{x}\sin\theta-k_{y}\cos\theta)\sigma_{z}. As evident from Eq. ( 3 ), the coupling

Read the complete text