A Quantum Speedup in Localizing Transmission Loss Change in Optical Networks

Yufei Zheng, Yu-Zhen Janice Chen, Prithwish Basu, Don Towsley · 2025

Read A Quantum Speedup in Localizing Transmission Loss Change in Optical Networks by Yufei Zheng, Yu-Zhen Janice Chen, Prithwish Basu, Don Towsley (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-10882.txt.

Introduction

Yufei Zheng, Yu-Zhen Janice Chen, Prithwish Basu, and Don Towsley use quantum light probes to find sudden loss in fiber networks faster. A link that turns lossy drags down speed, reliability, and security. Quantum probes, streams of squeezed or entangled pulses, sense loss changes more sharply than plain light. Sharper sensing means earlier alarms.

The team first extends the probe math to blocks of any size. They then design probe paths that keep every suspect link identifiable while limiting travel distance. New cumulative-sum statistics turn probe readings into a quickest-change alarm. Simulations show the quantum scheme flags loss sooner than classic probes. The work ties quantum sensing to a concrete network chore: naming the link that just went bad.

Catalog record

CREATORYufei Zheng, Yu-Zhen Janice Chen, Prithwish Basu, Don Towsley
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE83 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-10882

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Quantum Speedup in Localizing Transmission Loss Change in Optical Networks Yufei Zheng, Yu-Zhen Janice Chen, Prithwish Basu, Don Towsley Abstract The ability to localize transmission loss change to a subset of links in optical networks is crucial for maintaining network reliability, performance and security. Quantum probes , implemented by sending blocks of n n coherent-state pulses augmented with continuous-variable (CV) squeezing ( n = 1 n=1 ) or weak temporal-mode entanglement ( n > 1 n>1 ) over a lossy channel to a receiver with homodyne detection capabilities, are known to be more sensitive than their quasi-classical counterparts in detecting a sudden increase in channel loss. The enhanced sensitivity can be characterized by the increased Kullback-Leibler (KL) divergence of the homodyne output, before and after the loss change occurs. When combined with the theory of quickest change detection (QCD), the increase in KL divergence translates into a decrease in detection latency. In this work, we first revisit quantum probes over a channel, and consider the ratio of quantum to classical KL divergences as a metric for quantum speedup. We generalize previous results on n = 1 n=1 (CV squeezed states) to arbitrary values of n n , and discuss the monotonicity and asymptotics of this ratio with respect to the parameters of the quantum probe. Assuming a subset of nodes in an optical network is capable of sending and receiving such probes through intermediate nodes with all-optical switching capabilities, we present a scheme for quickly detecting the links that have suffered a sudden drop in transmissivity. Since quantum probes lose their sensitivity with increasing loss in the channel, we first propose a probe construction algorithm that makes the set of links suffering transmission loss change identifiable, while minimizing the longest distance a probe traverses. We then introduce new cumulative sum (CUSUM) statistics with a stopping rule, which allows us to run the CUSUM algorithm to quickly localize the faulty links using our constructed probes. Finally, we show that the proposed scheme achieves a quantum speedup in decreasing the localization delay. 1 Introduction If we augment part of a classical network with quantum capabilities, what can we do better than in the purely classical setting? In this paper, we show that detecting transmission loss change in an optical network provides one answer to this question. Optical networks are highly prevalent in modern communication systems. Major cloud providers rely on optical networks to connect data centers and ensure reliable access to cloud services [ 17 , 27 , 33 ] . Additionally, optical mesh networks, e.g., Reconfigurable Optical Add-Drop Multiplexer (ROADM) networks have seen significant density of deployment by metropolitan area Internet Service Providers and telecom providers. However, unattended optical fiber networks are often subjected to physical damages to fibers, or unauthorized fiber tapping [ 23 , 30 , 16 ] . These lead to increases in transmission loss, which often translates into increased bit error rates, which may in turn impact the quality of service. Perhaps more strikingly, by introducing only a small transmission loss, an eavesdropper can extract information on the data being transferred [ 23 , 16 ] . Therefore, the ability to detect transmission loss in an optical network is crucial for maintaining network reliability, performance and security. Classical and quasi-classical methods such as bit error rate measurement, optical spectrum analysis (OSA), and mean optical power monitoring exist for detecting changes in transmission loss in an optical channel , but are generally not fast enough to detect a change in transmission loss that lasts for only seconds [ 30 , 11 ] . Optical time-domain reflectometry (OTDR) is used for fault detection and localization, but it is not sensitive enough for the order of loss incurred by a stealthy eavesdropper [ 3 , 29 , 11 ] . The Quantum Alarm technique [ 11 ] achieves better empirical sensitivity, by using the parameter estimation step of continuous-variable quantum key distribution (CV-QKD) protocols to act as an alarm for loss detection. The quasi-classical benchmark in [ 12 ] is a better protocol due to the data processing inequality—while the parameters used in Quantum Alarm [ 11 ] are the output of homodyne detection after post-processing—the quasi-classical benchmark in [ 12 ] works directly with the probabilistic distributions from the homodyne output, using the theory of quickest change detection (QCD) . On the quantum side, [ 12 ] recently shows that, a vanishingly small quantum energy in the form of squeezed states , when added to the bright classical pulses, dramatically increases the sensitivity in detecting transmission loss change in an optical channel. The quantum protocols in [ 12 ] are simple to implement and effective, with the simplest protocol involving sending displaced squeezed states as probes from a squeezing augmented transmitter over a lossy channel, and processing the output at a homodyne detection receiver. In the advanced protocol, coherent states augmented by a continuous-variable entanglement produced by a temporal-mode Green Machine [ 7 ] are sent as probes, and the outputs are similarly captured by a homodyne detector. Feeding the homodyne outputs into a cumulative sum (CUSUM) algorithm [ 25 ] , one can quickly catch the change, with a detection delay that is inversely proportional to the Kullback-Leibler (KL) divergence from the pre-change to the post-change distributions. Compared to the quasi-classical benchmark, the quantum probes induce a larger KL divergence, which leads to a lower detection delay. In this paper, we first revisit quantum probes over a channel, generalize and extend existing theoretical results on squeezing-augmented probes to the general entanglement-augmented probes. Then, building on the quantum probes for a channel [ 12 ] , we propose a method for detecting and localizing transmission loss change in a network . Though the technologies for sending and receiving these probes are readily available, it is only realistic to assume that a subset of the network nodes are equipped with such quantum capabilities. We refer to the quantum-capable nodes as monitors . We assume the rest of the nodes, the non-monitors, are passive optical switches that can pass the quantum probes through. When expanding the goal from change detection in a channel to fault localization in a network, we must decide how to route the probes given a network topology and a set of monitors. If we think of whether a link suffers a sudden transmission drop as a Boolean state of the link, the framework of Boolean network tomography [ 8 ] can help infer every link’s state with limited visibility through probes between monitors, and therefore localize the transmission drop. While the probes do not output Boolean values, their ability to distinguish whether a change occurs on the links they traverse is what makes the Boolean framework relevant. Previous works have studied where to place monitors in a network [ 21 ] , conditions that allow network failures to be identified [ 22 ] , and how to construct probes to localize faults [ 1 , 32 ] . Recognizing that we often do not get to choose where quantum capabilities are placed, in this work, we focus on the probe construction problem. The fact that probes are quantum brings in new objectives in designing the construction

Read the complete text